Бібліотека БДМУ

Головна

Спрощенний режим

Опис

Бази даних

Доступ до повнотекстових книг Springer Nature (через IP-адреси БДМУ) - результати пошуку

Вид пошуку

К Н И Г И

Періодичні видання

Дисертації та автореферати

Фонд рідкісних видань

Електронна Навчальна література

Публікації засновників кафедр БДМУ

Нововведення у сфері охорони здоров'я

Календар пам'ятних дат

Доступ до повнотекстових книг Springer Nature (через IP-адреси БДМУ)

Зона пошуку

у знайденому

Формат представлення знайдених документів:
повний	інформаційний	короткий

Відсортувати знайдені документи за:
автором	назвою	роком видання	типом документа

Пошуковий запит: (<.>S=Machinery.<.>)

Загальна кiлькiсть документiв : 31
Показанi документи с 1 за 20

1-20 21-31

    Locomotives and Rail Road Transportation [[electronic resource] :] : technology, Challenges and Prospects / / ed. Agarwal, Avinash Kumar. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - X, 245 p. 129 illus. - Б. ц.
    Зміст:
Diesel Locomotives on Indian Railways : A Technological History --
Catalytic Solutions for Diesel Particulate Emission Control --
Exhaust Heat Recovery Options for Diesel Locomotives --
Potential of DME and Methanol as Locomotive Fuel in India: Opportunities, Technology Options and Challenges --
Diesel Locomotive Noise: Sources, Measurement Methods and Standards, and Reduction Strategies --
Air Flow Regimes, Thermal Comfort and Energy Efficiency in Public Transportation Trains --
Exhaust after Treatment System for Diesel Locomotive Engines - A Review --
Development of a Mobile Emission Test Car for Indian Railways --
Soot Formation in Turbulent Diffusion Flames: Effect of Differential Diffusion.
Рубрики: Transportation.
   Engines.
   Machinery.
   Transportation engineering.
   Traffic engineering.
   Transportation.
   Engine Technology.
   Transportation Technology and Traffic Engineering.
Анотація: This book is intended to serve as a compendium on the state-of-the-art research in the field of locomotives and rail road transport. The book includes chapters on different aspects of the subject from renowned international experts in the field. The book looks closely at diesel engine locomotives and examines performance, emissions, and environmental impact. The core topics have been categorised into four groups: general topics, efficiency improvement and noise reduction, alternate fuels for locomotive traction, and locomotive emission reduction and measurement. The book offers an excellent, cutting-edge resource for researchers working in this area. The book will also be of use to professionals and policymakers interested in locomotive engine technologies and emission standards.

Перейти: https://doi.org/10.1007/978-981-10-3788-7

Дод.точки доступу:
Agarwal, Avinash Kumar. \ed.\; Dhar, Atul. \ed.\; Gautam, Anirudh. \ed.\; Pandey, Ashok. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

    Combustion for Power Generation and Transportation [[electronic resource] :] : technology, Challenges and Prospects / / ed. Agarwal, Avinash Kumar. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - X, 451 p. 240 illus., 178 illus. in color. - Б. ц.
    Зміст:
Continuous Detonation Wave Engines for the Future --
Carbon Sequestration and Optimization of Enhanced Oil and Gas Recovery --
Lean Blowout (LBO) Prediction through Symbolic Time Series Analysis --
Multiple Mapping Conditioning Approach for Turbulent Reactive Flows --
Gasoline Direct Injection – Challenges --
Use of Lasers and Optical Diagnostics for Next Generation IC Engine Development: Ushering New Era of Engine Development --
Investigation of Forward and Reverse Flow CDC Combustors --
Advanced Combustion Concepts for Energy Generation and Environmental Sustainability --
Theoretical Formulation for the Investigation of Entropy-Driven Combustion Instabilities in Gas Turbine Engines --
Thermodynamic Modelling of Combustion Process in a Spark Ignition Engine and its Numerical Predictions --
Effect of Premixed Ratio and Injection Timing on the Combustion and Emission Characteristics of RCCI Engine --
A Novel Concept for Energy Modeling and Simulation --
Global and Local Viewpoints to Analyze Turbulence-Premixed Flame Interaction --
Design of a Solar-Powered Stirling Engine - Generator --
Chronology of Dynamic Stall Characteristics Through Simultaneous PIV and Surface Pressure Measurements --
Syngas as SI Engine Fuel: Combustion Perspective --
Exergy Destruction Study on a Small DI Diesel Engine --
Numerical Modeling of MILD Combustion at High Pressure to Predict the Optimal Operating Conditions --
Pulse Combustor Driven Pressure-Gain Combustion For High Efficiency Gas Turbine Engines --
Development of an Indigenous Sensor For Sub-Micron Aerosol Monitoring in India.
Рубрики: Energy systems.
   Thermodynamics.
   Heat engineering.
   Heat transfer.
   Mass transfer.
   Engines.
   Machinery.
   Energy Systems.
   Engineering Thermodynamics, Heat and Mass Transfer.
   Engine Technology.
Анотація: This research monograph presents both fundamental science and applied innovations on several key and emerging technologies involving fossil and alternate fuel utilization in power and transport sectors from renowned experts in the field. Some of the topics covered include: autoignition in laminar and turbulent nonpremixed flames; Langevin simulation of turbulent combustion; lean blowout (LBO) prediction through symbolic time series analysis; lasers and optical diagnostics for next generation IC engine development; exergy destruction study on small DI diesel engine; and gasoline direct injection. The book includes a chapter on carbon sequestration and optimization of enhanced oil and gas recovery. The contents of this book will be useful to researchers and professionals working on all aspects on combustion.

Перейти: https://doi.org/10.1007/978-981-10-3785-6

Дод.точки доступу:
Agarwal, Avinash Kumar. \ed.\; De, Santanu. \ed.\; Pandey, Ashok. \ed.\; Singh, Akhilendra Pratap. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

    Biofuels [[electronic resource] :] : technology, Challenges and Prospects / / ed. Agarwal, Avinash Kumar. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - X, 245 p. 94 illus. - Б. ц.
    Зміст:
Performance of Thermo-Chemical Bio-Ethanol Production from Agricultural Waste Through Polygeneration: Multi Dimensional Assessment --
Development of a Novel Combustor For Low Emission Combustion of Biofuels --
Sustainable Production of Value-added Chemicals and Energy Fuel Precursors from Lignocellulosic Biomass Through Chemical Catalysis --
Microbial Electrochemical Platform: Biofactory with Diverse Applications --
Various Aspects of Pretreatment Strategies of Lignocellulosic Biomass Towards Ethanol Yield --
Role of Hydrothermal Liquefaction Processes in an Integrated Biorefinery --
Ultrasound-Assisted Biodiesel Synthesis: Perspectives, Opportunities and Challenges --
Production of Biodiesel From Carbon Dioxide Concentrating Micro-Organisms --
Meta-Model Driven Multi-Objective Optimization in the Performance-Emission Trade-Off Paradigm of a Diesel-Hydrogen Dual Fuel Operation: A Case-Study --
Production of Biodiesel Through Hydrodynamic Cavitation and Ultrasonic Energy and Its Performance in Diesel Engines --
Microalgae Based Biofuels: Challenges and Opportunities --
Effect of Blending Alcohols on Performance and Exhaust of Kerosene Fuelled 4-Stroke Genset --
Surrogates for Biodiesels: Review and Challenges.
Рубрики: Renewable energy resources.
   Fossil fuels.
   Engines.
   Machinery.
   Renewable and Green Energy.
   Fossil Fuels (incl. Carbon Capture).
   Engine Technology.
Анотація: This book is intended to serve as a compendium on the state-of-the-art research in the field of biofuels. The book includes chapters on different aspects of biofuels from renowned international experts in the field. The book looks at current research on all aspects of biofuels from raw materials to production techniques. It also includes chapters on analysis of performance of biofuels, particularly biodiesel, in engines. The book incorporates case studies that provide insights into the performance of biofuels in applications such as automotive engines and diesel generators. The contents of the book will be useful to graduate students and researchers working on all aspects of biofuels. The book will also be of use to professionals and policymakers interested in biofuels.

Перейти: https://doi.org/10.1007/978-981-10-3791-7

Дод.точки доступу:
Agarwal, Avinash Kumar. \ed.\; Agarwal, Rashmi Avinash. \ed.\; Gupta, Tarun. \ed.\; Gurjar, Bhola Ram. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

    Song, Jianli.
    Cold Rolling Precision Forming of Shaft Parts [[electronic resource] :] : theory and Technologies / / Jianli. Song, Liu, Zhiqi., Li, Yongtang. ; . - 1st ed. 2017. - [S. l. : s. n.]. - XVII, 276 p. 179 illus., 85 illus. in color. - Б. ц.
    Зміст:
Introduction --
Principle and Mechanical Analysis on Cold Rolling Precision Forming of Spline --
Process Parameters in the Cold Rolling Precision Forming of Spline --
Numerical Simulation of the Cold Rolling Process of Spline --
Metal Flow Rules and Forming Quality of the Spline Shafts in Cold Rolling Forming --
Mechanism and Process Analysis on the Cold Rolling Forming of Threads --
Process Parameters in the Cold Rolling Forming of Threads --
Numerical Simulation of the Cold Rolling Forming Process of Thread --
Metal Flow Rule and Parameter Optimization of the Cold Rolling Precision Forming of Threads --
Cold Rolling Precision Forming Machines. .
Рубрики: Manufactures.
   Machinery.
   Mechanics.
   Mechanics, Applied.
   Manufacturing, Machines, Tools, Processes.
   Machinery and Machine Elements.
   Solid Mechanics.
Анотація: This book presents in detail the theory, processes and equipment involved in cold rolling precision forming technologies, focusing on spline and thread shaft parts. The main topics discussed include the status quo of research on cold rolling precision forming technologies; the design and calculation of process parameters; the numerical simulation of cold rolling forming processes; and the equipment used in cold rolling forming. The mechanism of cold rolling forming is extremely complex, and research on the processes, theory and mechanical analysis of spline cold rolling forming has remained very limited to date. In practice, the forming processes and production methods used are mainly chosen on the basis of individual experience. As such, there is a marked lack of both systematic, theory-based guidelines, and of specialized books covering theoretical analysis, numerical simulation, experiments and equipment used in spline cold rolling forming processes – all key points that are included in this book and illustrated using tables, 3D photographs and formula derivations.

Перейти: https://doi.org/10.1007/978-3-662-54048-0

Дод.точки доступу:
Liu, Zhiqi.; Li, Yongtang.; Song, Jianli. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

    Ito, Yoshimi.
    Theory and Practice in Machining Systems [[electronic resource] /] : монография / Yoshimi. Ito, Matsumura, Takashi. ; . - 1st ed. 2017. - [S. l. : s. n.]. - XII, 292 p. 278 illus., 163 illus. in color. - Б. ц.
    Зміст:
PART I Fundamentals --
1 Metal Processing Technology in General – Importance of Hierarchical Classification.-PART II Determinants for Functional and Performance Specifications in Machining Space --
2 Choosing Guide in Form-generating Movement and New Approaches to Machining Technology – Correlation Diagramme among Machining Method - Tools- Attachments - Machine kinds --
3 Raw Materials for Work, Engineering Materials and Swarf Discharge --
4 Structural Body Components Closely Allocated around Machining Space - Core for User-oriented Platform System.-5 Work and Tool Holding Devices – Chuck, Centre, Mandrel and Tool Holder --
6 In-process and On-the-machine Measurement.-7 “ Platform Concept ”, Its Application and Modular Tooling System.-PART III Practice and Theory at Machining Point.-8 Various Machining Methods and Tools in General --
9 Mechanisms for Metal Cutting and Grinding Including Cutting and Grinding tools.-1 0 Numerical Simulation for Metal Cutting and Grinding.-APPENDIXES.
Рубрики: Manufactures.
   Engineering design.
   Machinery.
   Applied mathematics.
   Engineering mathematics.
   Manufacturing, Machines, Tools, Processes.
   Engineering Design.
   Machinery and Machine Elements.
   Mathematical and Computational Engineering.
Анотація: This book describes machining technology from a wider perspective by considering it within the machining space. Machining technology is one of the metal removal activities that occur at the machining point within the machining space. The machining space consists of structural configuration entities, e.g., the main spindle, the turret head and attachments such the chuck and mandrel, and also the form-generating movement of the machine tool itself. The book describes fundamental topics, including the form-generating movement of the machine tool and the important roles of the attachments, before moving on to consider the supply of raw materials into the machining space, and the discharge of swarf from it, and then machining technology itself. Building on the latest research findings “Theory and Practice in Machining System” discusses current challenges in machining. Thus, with the inclusion of introductory and advanced topics, the book can be used as a guide and survey of machining technology for students and also as the basis for the planning of future research by professors and researchers in universities and scientific institutions. Professional engineers can use the book as a signpost to technical developments that will be applied in industry in coming years.

Перейти: https://doi.org/10.1007/978-3-319-53901-0

Дод.точки доступу:
Matsumura, Takashi.; Ito, Yoshimi. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

    Ostovic, Vlado.
    The Art and Science of Rotating Field Machines Design: A Practical Approach [[electronic resource] /] : монография / Vlado. Ostovic ; . - 1st ed. 2017. - [S. l. : s. n.]. - XX, 463 p. 318 illus. - Б. ц.
    Зміст:
Introduction.– Windings --
Magnetic Circuit --
Machine Parameters --
Skin and Proximity Effect --
Force and Torque --
Thermal Design of Rotating Field Electric Machines --
General Principles of A.C. Machines Design.
Рубрики: Power electronics.
   Machinery.
   Industrial organization.
   Power Electronics, Electrical Machines and Networks.
   Machinery and Machine Elements.
   Industrial Organization.
Анотація: This book highlights procedures utilized by the design departments of leading global manufacturers, offering readers essential insights into the electromagnetic and thermal design of rotating field (induction and synchronous) electric machines. Further, it details the physics of the key phenomena involved in the machines’ operation, conducts a thorough analysis and synthesis of polyphase windings, and presents the tools and methods used in the evaluation of winding performance. The book develops and solves the machines’ magnetic circuits, and determines their electromagnetic forces and torques. Special attention is paid to thermal problems in electrical machines, along with fluid flow computations. With a clear emphasis on the practical aspects of electric machine design and synthesis, the author applies his nearly 40 years of professional experience with electric machine manufacturers – both as an employee and consultant – to provide readers with the tools they need to determine fluid flow parameters and compute temperature distributions.

Перейти: https://doi.org/10.1007/978-3-319-39081-9

Дод.точки доступу:
Ostovic, Vlado. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

    Moridi, Atieh.
    Powder Consolidation Using Cold Spray [[electronic resource] :] : process Modeling and Emerging Applications / / Atieh. Moridi ; . - 1st ed. 2017. - [S. l. : s. n.]. - XVII, 127 p. 52 illus., 20 illus. in color. - Б. ц.
    Зміст:
Introduction --
Experiments --
Modeling cold spray --
Applications.
Рубрики: Manufactures.
   Materials—Surfaces.
   Thin films.
   Machinery.
   Structural materials.
   Manufacturing, Machines, Tools, Processes.
   Surfaces and Interfaces, Thin Films.
   Machinery and Machine Elements.
   Structural Materials.
Анотація: This book first presents different approaches to modeling of the cold spray process with the aim of extending current understanding of its fundamental principles and then describes emerging applications of cold spray. In the coverage of modeling, careful attention is devoted to the assessment of critical and erosion velocities. In order to reveal the phenomenological characteristics of interface bonding, severe, localized plastic deformation and material jet formation are studied. Detailed consideration is also given to the effect of macroscopic defects such as interparticle boundaries and subsequent splat boundary cracking on the mechanical behavior of cold spray coatings. The discussion of applications focuses in particular on the repair of damaged parts and additive manufacturing in various disciplines from aerospace to biomedical engineering. Key aspects include a systematic study of defect shape and the ability of cold spray to fill the defect, examination of the fatigue behavior of coatings for structural applications, and a novel working window at subcritical conditions to obtain porous structures. This book is exceptional in scope, and its review of finite element modelling at different length scales sheds light on future design and process improvement in emerging applications such as structural repair, metal additive manufacturing and metal foam design.

Перейти: https://doi.org/10.1007/978-3-319-29962-4

Дод.точки доступу:
Moridi, Atieh. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

    Fluid Mechanics and Fluid Power – Contemporary Research [[electronic resource] :] : proceedings of the 5th International and 41st National Conference on FMFP 2014 / / ed. Saha, Arun K. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XXIV, 1701 p. 1095 illus. - Б. ц.
Рубрики: Fluid mechanics.
   Thermodynamics.
   Heat engineering.
   Heat transfer.
   Mass transfer.
   Engines.
   Machinery.
   Engineering Fluid Dynamics.
   Engineering Thermodynamics, Heat and Mass Transfer.
   Engine Technology.
Анотація: This volume comprises the proceedings of the 42nd National and 5th International Conference on Fluid Mechanics and Fluid Power held at IIT Kanpur in December, 2014.The conference proceedings encapsulate the best deliberations held during the conference. The diversity of participation in the conference, from academia, industry and research laboratories reflects in the articles appearing in the volume. This contributed volume has articles from authors who have participated in the conference on thematic areas such as Fundamental Issues and Perspectives in Fluid Mechanics; Measurement Techniques and Instrumentation; Computational Fluid Dynamics; Instability, Transition and Turbulence; Turbomachinery; Multiphase Flows; Fluid?Structure Interaction and Flow?Induced Noise; Microfluidics; Bio?inspired Fluid Mechanics; Internal Combustion Engines and Gas Turbines; and Specialized Topics. The contents of this volume will prove useful to researchers from industry and academia alike. .

Перейти: https://doi.org/10.1007/978-81-322-2743-4

Дод.точки доступу:
Saha, Arun K. \ed.\; Das, Debopam. \ed.\; Srivastava, Rajesh. \ed.\; Panigrahi, P. K. \ed.\; Muralidhar, K. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

    2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering [[electronic resource] /] : монография / ed. Awang, Mokhtar. - 1st ed. 2017. - [S. l. : s. n.]. - VI, 126 p. 72 illus., 54 illus. in color. - Б. ц.
Рубрики: Manufactures.
   Machinery.
   Manufacturing, Machines, Tools, Processes.
   Machinery and Machine Elements.
Анотація: This volume presents selected papers from the 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE 2016) which was held from 23rd to 24th November, 2016 in Kuala Lumpur, Malaysia. The proceedings discuss genuine problems of joining technologies that are heart of manufacturing sectors. It discusses the findings of experimental and numerical works from soldering, arc welding to solid state joining technology that faced by current industry. .

Перейти: https://doi.org/10.1007/978-981-10-4232-4

Дод.точки доступу:
Awang, Mokhtar. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

10.

    Rossi, Cesare.
    Ancient Engineers' Inventions [[electronic resource] :] : precursors of the Present / / Cesare. Rossi, Russo, Flavio. ; . - 2nd ed. 2017. - [S. l. : s. n.]. - XVII, 420 p. 300 illus., 116 illus. in color. - Б. ц.
    Зміст:
Premise: Representing and Measuring the Environment --
A premise: it all started with a drawing --
I.1 Elevations, Plan and Sections --
I.2 Protohistoric Drafting machine for the clay tablets engraving --
I.3 Examples of planimetries from the IV millennium B.C. to the I century A.D. --
I.4 Ancient Units --
1. Measuring Mass --
Introduction --
1.1 The balance scale --
1.2 The steelyard balance --
Observations --
2 Measuring Distance and Slope --
Introduction --
2.1 Jacob’s staff --
2.2 Range finders --
2.3 The Astrolabe --
2.4 The dioptre by Heron --
2.5 The ancient odometers --
Observations --
Measuring a building height by an astrolabe --
Measuring the distances by the groma and by the surveyor’s cross --
3 Measuring Time --
Introduction --
3.1 The sundial --
3.2 Water clocks --
Observations --
4 Orientation --
Introduction --
4.1 The Sundial Compass --
4.2 The Chinese South-Pointing Chariot Sundial Compass --
4.3 The Windrose and the Magnetic Compass --
5 Ancient Computation Devices --
Introduction --
5.1 The Abacus --
5.2 The Mesolabio --
5.3 The Mechanism of Antikitera --
Observations --
6 The Natural Energy Used In Antiquity --
Introduction --
6.1 Energy from man --
6.2 Energy from animals --
6.3 The capstan --
6.4 The treadwheel --
6.5 Rough evaluation of the power from a wind motor --
6.6 Rough evaluation of the power from a waterwheel --
7 Wind Motors --
Introduction --
7.1 The wind mills --
7.2 Wings on the sea: the sails --
7.3.3 The Flettner rotor --
Observations --
8 Hydraulic Motors --
Introduction --
8.1 Water wheels with vertical axis --
8.2 Water wheels with horizontal axis --
8.3 The floating mill --
8.4 Water wheels in the Middle Ages and the Renaissance --
Observations --
9 Refrigeration and Heating --
9.1 Air Cooling with Wind Towers --
9.2 The production of ice --
9.3 Nero’s Sherbet --
9.3 Wheat Pits --
9.4 Heating and Thermal Baths --
9.5 Energy Saving: the Sun Chimney Heating and Thermal Baths --
10 The Production Of Water --
10.1 The Air Well --
10.2 The Dew Basin --
10.3 The Qanat --
10.4 Distillation --
11 Lifting Water --
Introduction --
11.1 The early devices --
11.2 The Archimedes’ screw --
11.3 Norias --
11.4 Pumps --
Observations --
12 Adduction and Distribution of Water --
Introduction --
12.1 Open ducts --
12.2 Penstocks --
12.3 The great cisterns --
12.4 Water distribution systems --
12.5 Pipes --
12.6 Valves --
12.7 Hydraulic mining --
Observations --
13 Underwater Activities --
Introduction --
13.1 Scuba divers --
13.2 Diving bell --
14 Transports --
Introduction --
14.1 Roman charts --
14.2 Railed cargo --
14.3 The rails of Pompei --
14.4 Ancient self-propelled vehicles --
14.5 Early ball bearings --
14.6 Transport on water --
14.7 Cableways --
14.10 The dawn of the flight in the antiquity --
Observations --
15 Telecommunications --
Introduction --
15.1 Acoustic --
15.2 Carrier pigeons --
15.3 Optical telecommunication systems --
15.4 Lighthouses --
15.5 The water telegraph --
Observations --
16 Medicine and Health --
Introduction --
16.1 Medical Assistance provided to Legionnaires --
16.2 Reconstructive Plastic Surgery --
16.3 Early Penicillin --
16.4 The Beginning of Biological Warfare --
17 Secondary Motors --
Introduction --
17.1 Cranes and tackle --
17.2 Gravity driven elevators --
17.3 Siege towers --
17.4 The trebuchet --
17.5 Flexion elastic motors --
17.6 Torsion elastic motors --
17.7 Throwing machines operated by torsion motors --
17.8 Mechanics of the throwing machines --
17.9 Pneumatic motors --
17.10 Small spring motors --
17.11 Ancient steam engines --
Observations --
18 Spinnind and Weaving --
Introduction --
18.1 The dawn of spinning and weaving --
18.2 The spinning wheel --
18.3 The mechanical spinning --
18.4 The automatic weaving --
Observations --
19 Some Applications of Fire --
Introduction --
19.1 Fire ignition --
19.1.2 Optical flints --
19.2 Marine fire – the Roman candle --
19.3 Wind lanterns --
19.4 Fire for warming --
19.5 Fire for warfare --
19.6 The protection from fire: asbestos --
20 Automata (Towards automation and robots) --
Introduction --
20.1 The Hellenistic Age --
20.2 The Middle Ages --
20.3 The Renaissance --
20.4 The XVIII Century --
20.5 The XIX Century --
20.6 Automata of the Far East --
20.7 Between the two millenniums --
Observations --
21 Some Ancient Building Techniques --
Introduction --
21.1 Stone buildings --
21.2 Concrete Buildings --
21.3 Considerations on the polygonal work --
21.4 Earthquake-resistant buildings with wooden ribs --
21.5 Seismic isolators --
21.6 Consideration on ancient concrete --
Subject Index. .
Рубрики: Engineering design.
   Machinery.
   Technology—History.
   Archaeology.
   History.
   Engineering Design.
   Machinery and Machine Elements.
   History of Technology.
   Archaeology.
   History of Science.
Анотація: This book describes the inventions and designs of ancient engineers who are the precursors of the present. The period ranges mainly from 300 B.C. to 1600 A.D. with several exceptions. Many of the oldest inventions are documented by archaeological finds, often very little known, mainly from Pompeii, Herculaneum and Stabiae and reveal a surprising modernity in their conception. Most of the inventions presented in the first four parts of the book were conceived up to the late Roman Empire and may be considered as milestones, each in their respective field. The fifth part concentrates on more recent centuries. The sixth part deals with some building construction techniques. Generally, for each of the presented inventions, three elements of research and reference are provided: written documents (the classics), iconic references (coins, bas-reliefs, etc.) and archaeological findings. The authors did not write this book for engineers only; hence they describe all the devices without assuming wide technical knowledge. The authors’ main aim is to try to communicate their enthusiasm for the inventions and the inventors of the past and to contribute to the fascinating study of the History of Engineering. This second edition includes new topics and chapters that are of special interest to engineers.

Перейти: https://doi.org/10.1007/978-3-319-44476-5

Дод.точки доступу:
Russo, Flavio.; Rossi, Cesare. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

11.

    Cyclostationarity: Theory and Methods III [[electronic resource] :] : contributions to the 9th Workshop on Cyclostationary Systems and Their Applications, Grodek, Poland, 2016 / / ed. Chaari, Fakher. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - VIII, 257 p. 115 illus., 97 illus. in color. - Б. ц.
    Зміст:
From the content: Weak Dependence: An Introduction Through Asymmetric ARCH Models --
Subsampling for Non?Stationary Time Series With Long Memory and Heavy Tails Using Weak Dependence Condition --
Change?Point Problem in the Fraction of Time Approach.
Рубрики: Machinery.
   Vibration.
   Dynamical systems.
   Dynamics.
   Signal processing.
   Image processing.
   Speech processing systems.
   Mathematical models.
   Quality control.
   Reliability.
   Industrial safety.
   Machinery and Machine Elements.
   Vibration, Dynamical Systems, Control.
   Signal, Image and Speech Processing.
   Mathematical Modeling and Industrial Mathematics.
   Quality Control, Reliability, Safety and Risk.
Анотація: This book gathers contributions presented at the 9th Workshop on Cyclostationary Systems and Their Applications, held in Grodek nad Dunajcem, Poland in February 2016. It includes both theory-oriented and practice-oriented chapters. The former focus on heavy-tailed time series and processes, PAR models, rational spectra for PARMA processes, covariance invariant analysis, change point problems, and subsampling for time series, as well as the fraction-of-time approach, GARMA models and weak dependence. In turn, the latter report on case studies of various mechanical systems, and on stochastic and statistical methods, especially in the context of damage detection. The book provides students, researchers and professionals with a timely guide to cyclostationary systems, nonstationary processes and relevant engineering applications.

Перейти: https://doi.org/10.1007/978-3-319-51445-1

Дод.точки доступу:
Chaari, Fakher. \ed.\; Leskow, Jacek. \ed.\; Napolitano, Antonio. \ed.\; Zimroz, Radoslaw. \ed.\; Wylomanska, Agnieszka. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

12.

    Kulkarni, Parag.
    Reverse Hypothesis Machine Learning [[electronic resource] :] : a Practitioner's Perspective / / Parag. Kulkarni ; . - 1st ed. 2017. - [S. l. : s. n.]. - XVI, 138 p. 61 illus., 9 illus. in color. - Б. ц.
    Зміст:
Pattern Apart --
Understanding Machine Learning Opportunities --
Systemic Machine Learning --
Reinforcement and Deep Reinforcement Machine Learning --
Creative Machine Learning --
Co-operative and Collective learning for Creative Machine Learning --
Building Creative Machines with Optimal Machine Learning and Creative Machine Learning Applications --
Conclusion – Learning Continues.
Рубрики: Computational intelligence.
   Knowledge management.
   Machinery.
   Management.
   Industrial management.
   Electronics.
   Microelectronics.
   Computational Intelligence.
   Knowledge Management.
   Machinery and Machine Elements.
   Innovation/Technology Management.
   Electronics and Microelectronics, Instrumentation.
Анотація: This book introduces a paradigm of reverse hypothesis machines (RHM), focusing on knowledge innovation and machine learning. Knowledge- acquisition -based learning is constrained by large volumes of data and is time consuming. Hence Knowledge innovation based learning is the need of time. Since under-learning results in cognitive inabilities and over-learning compromises freedom, there is need for optimal machine learning. All existing learning techniques rely on mapping input and output and establishing mathematical relationships between them. Though methods change the paradigm remains the same—the forward hypothesis machine paradigm, which tries to minimize uncertainty. The RHM, on the other hand, makes use of uncertainty for creative learning. The approach uses limited data to help identify new and surprising solutions. It focuses on improving learnability, unlike traditional approaches, which focus on accuracy. The book is useful as a reference book for machine learning researchers and professionals as well as machine intelligence enthusiasts. It can also used by practitioners to develop new machine learning applications to solve problems that require creativity.

Перейти: https://doi.org/10.1007/978-3-319-55312-2

Дод.точки доступу:
Kulkarni, Parag. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

13.

    Rusinski, Eugeniusz.
    Surface Mining Machines [[electronic resource] :] : problems of Maintenance and Modernization / / Eugeniusz. Rusinski, Czmochowski, Jerzy., Moczko, Przemyslaw., Pietrusiak, Damian. ; . - 1st ed. 2017. - [S. l. : s. n.]. - X, 169 p. 195 illus., 168 illus. in color. - Б. ц.
    Зміст:
Introduction --
Exploitation, Maintenance Problems in Operation of Mega Machines --
Methods of Condition Assessment --
Failure Analysis --
Modernization of Existing Machines --
Summary and Conclusions.
Рубрики: Machinery.
   Manufactures.
   Machinery and Machine Elements.
   Manufacturing, Machines, Tools, Processes.
   Manufacturing, Machines, Tools, Processes.
Анотація: This unique volume imparts practical information on the operation, maintenance, and modernization of heavy performance machines such as lignite mine machines, bucket wheel excavators, and spreaders. Problems of large scale machines (mega machines) are highly specific and not well recognized in the common mechanical engineering environment. Prof. Rusinski and his co-authors identify solutions that increase the durability of these machines as well as discuss methods of failure analysis and technical condition assessment procedures. "Surface Mining Machines: Problems in Maintenance and Modernization" stands as a much-needed guidebook for engineers facing the particular challenges of heavy performance machines and offers a distinct and interesting demonstration of scale-up issues for researchers and scientists from across the fields of machine design and mechanical engineering.

Перейти: https://doi.org/10.1007/978-3-319-47792-3

Дод.точки доступу:
Czmochowski, Jerzy.; Moczko, Przemyslaw.; Pietrusiak, Damian.; Rusinski, Eugeniusz. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

14.

    Qiu, Ming.
    Bearing Tribology [[electronic resource] :] : principles and Applications / / Ming. Qiu, Chen, Long., Li, Yingchun., Yan, Jiafei. ; . - 1st ed. 2017. - [S. l. : s. n.]. - XII, 333 p. 145 illus., 9 illus. in color. - Б. ц.
    Зміст:
Friction, wear and lubrication in the bearing application --
Bearing surface contact --
Mechanism of bearing friction and wear --
Materials for bearing frictional pairs --
Sliding bearing lubrication theory --
Rolling bearing lubrication theory --
Bearing lubrication application --
Friction and wear testing technology in the bearing --
Fault diagnosis and status monitoring of the bearing --
Applied tribology in the bearing.
Рубрики: Machinery.
   Tribology.
   Corrosion and anti-corrosives.
   Coatings.
   Engineering design.
   Machinery and Machine Elements.
   Tribology, Corrosion and Coatings.
   Engineering Design.
Анотація: By focusing on the theory and techniques of tribological design and testing for bearings, this book systematically reviews the latest advances in applications for this field. It describes advanced tribological design, theory and methods, and provides practical technical references for investments in bearing design and manufacturing. The theories, methods and cases in this book are largely derived from the practical engineering experience gained and research conducted by the author and her team since the 2000s. The book includes academic papers, technical reports and patent literature, and offers a valuable guide for engineers involved in bearing design. The book is intended for engineers, researchers and graduate students in the field of mechanical engineering, especially in bearing engineering.

Перейти: https://doi.org/10.1007/978-3-662-53097-9

Дод.точки доступу:
Chen, Long.; Li, Yingchun.; Yan, Jiafei.; Qiu, Ming. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

15.

    New Trends in Mechanism and Machine Science [[electronic resource] :] : theory and Industrial Applications / / ed.: Wenger, Philippe., Flores, Paulo. - 1st ed. 2017. - [S. l. : s. n.]. - XIII, 617 p. 299 illus., 198 illus. in color. - Б. ц.
    Зміст:
Preface --
Mechanics of robots 1 --
Calculation of the ball raceway interferences due to manufacturing errors and their influence on the friction moment in four-contact-point slewing bearings, by Iker Heras, Josu Aguirrebeitia and Mikel Abasolo --
Meshing Analysis for TA Worm Drive, by Yaping Zhao --
Trade-Off for Space Mechanisms Actuator ?Technology via a General Purpose Language and ?Domain Specific Simulations Framework, by Manolo Omiciuolo, Kristin Paetzold, Matthias Baader, Markus Thiels and Klaus Peter Foerster --
Tolerance Analysis of Serial Manipulators with Decoupled and Non-decoupled Dynamics, by Jiali Xu, Jean-Paul Le Baron and Vigen Arakelian --
Mechanism Analysis 1 --
Mobility analysis of coupler-driven planar four-bar linkages, by Shaoping Bai --
On the dynamic equivalence of planar mechanisms, an inertia decomposition method, by Jan De Jong, Johannes Van Dijk and Just Herder --
Determination of a Rigid Body Orientation by Means of Indirect Measurements, by Irina Gavrilovich, Sebastien Krut, Marc Gouttefarde and Francois Pierrot --
Algebraic Analysis of a New Variable-DOF 7R Mechanism, by Martin Pfurner and Xianwen Kong --
Overconstrained Single Loop Four Link Mechanisms with Revolute and Prismatic Joints, by Martin Pfurner, Thomas Stigger and Manfred L. Husty --
Parallel manipulators 1 --
Planar Stewart Gough platforms with quadratic singularity surface, by Bernd Aigner and Georg Nawratil --
Forward Kinematic Analysis of the 3-RPRS Parallel Manipulator, by Anirban Nag, Santhakumar Mohan and Sandipan Bandyopadhyay --
Computing the safe working zone of a 3-RRS parallel manipulator, by Dhruvesh Patel, Rohit Kalla, Sandipan Bandyopadhyay and Gokhan Kiper --
Comparison of 3-RPS and 3-SPR Parallel Manipulators based on Kinematic Performance, by Abhilash Nayak, Latifah Nurahmi, Philippe Wenger and Stephane Caro --
On the workspace representation and determination of spherical parallel robotic manipulators, by Khaled Arrouk, Belhassen-Chedli Bouzgarrou and Grigore Gogu --
Tensegrity mechanisms --
Compliant Gripper Based on a Multistable Tensegrity Structure, by Susanne Sumi, Valter Bohm, Florian Schale and Klaus Zimmermann --
Compliant Multistable Tensegrity Structures with Simple Topologies, by Valter Bohm, Susanne Sumi, Tobias Kaufhold and Klaus Zimmermann --
Toward the control of tensegrity mechanisms for variable stiffness applications: a case study, by Quentin Boehler, Salih Abdelaziz, Marc Vedrines, Philippe Poignet and Pierre Renaud --
Kinematic Analysis of a Continuum Parallel Robot, by Oscar Altuzarra, Mikel Diez, Javier Corral, Gennaro Teoli and Marco Ceccarelli --
Mechanics of robots 2 --
A New Formulation for Spatial Revolute Joints with Clearance, by Filipe Marques, Fernando Isaac, Nuno Dourado and Paulo Flores --
Efficiency Assessment in Spur Gears with Shifting and Profile Modifications, by Alberto Diez-Ibarbia, Alfonso Fernandez-Del-Rincon, Miguel Iglesias, Ana De-Juan, Pablo Garcia and Fernando Viadero --
Motion design considering moment of inertia, by Soren Schulze, Carsten Teichgraber and Maik Berger --
Recent Developments on Cylindrical Contact Force Models with Realistic Properties, by Fernando Isaac, Filipe Marques, Nuno Dourado and Paulo Flores --
On the Determination of the Meshing Stiffness and the Load Sharing of Spur Gears, by Jose I. Pedrero, Miguel Pleguezuelos and Miryam B. Sanchez --
Industrial and non-industrial applications 1 --
Winmecc: Software for the Analysis of Planar Mechanisms, by Antonio Ortiz, Juan Antonio Cabrera, Fernando Nadal and Alex Bataller --
Manipulator Motion Planning in Redundant Robotic System for Fiber Placement Process, by Jiuchun Gao, Anatol Pashkevich and Stephane Caro --
Free and Open Source Software Applications for Education of TMM Discipline in Bauman University, by Andrei Vukolov --
A Novel One-DoF Gravity Balancer Based on Cardan Gear Mechanism, by Yu-Chun Hung and Chin-Hsing Kuo --
Galvanometer laser scanning: Custom-made input signals for maximum duty cycles in high-end imaging applications, by Virgil-Florin Duma --
Control issues --
Optimal Motion of Flexible Objects with Oscillations Elimination at the Stop Point, by Natalia Varminska and Damien Chablat --
Alternating Error Effects on Decomposition Method in Function Generation Synthesis, by Omar W Maaroof, Mehmet Ismet Can Dede and Gokhan Kiper --
Control-based Design of a Five-bar Mechanism, by Lila Kaci, Sebastien Briot, Clement Boudaud and Philippe Martinet --
History of mechanisms --
F. Reuleaux, F. Wittenbauer: their Influence on Evolution of Applied Mechanics in Russia at the Beginnings of XXth century, by Andrei Vukolov --
Applying Modern CAD Systems to Reconstruction of Old Design, by Gennadiy Timofeev, Olga Egorova and Ilya Grigorev --
Cable mechanisms --
Increase of Position Accuracy for Cable-Driven Parallel Robots using a Model for Elongation of Plastic Fiber Ropes, by Valentin Schmidt and Andreas Pott --
Pose-Independent Counterweighting of Cable-Suspended Payloads with Application to Rehabilitation, by Carl Nelson, Raphael Thienpont and Ashish Shinde --
Preliminaries of a new approach for the direct kinematics of suspended cable-driven parallel robot with deformable cables, by Jean-Pierre Merlet --
Static Analysis of Planar 3-DOF Cable-Suspended Parallel Robots Carrying a Serial Manipulator, by Marc Gouttefarde --
Mechanism design and synthesis 1 --
Structural synthesis, Mobility Analysis and Creation of Complete Atlas of Multiloop Planar Multiple-jointed Kinematic Chains on Base All Possible Sets of Color Multiple Joints for Industrial Applications, by Ekaterina Ermoshina and Vladimir Pozhbelko --
Design and Development of a Triggered Type Underactuated Grasping Mechanism and its Application to an Experimental Test Bed, by Steven Grech and Michael Saliba --
Solving the minimum distance problem for the synthesis of mechanisms, by Igor Fernandez de Bustos, Vaness Garcia Marina and Gorka Urkullu --
Mobile Robot with Multiple Modes Based on 4-URU Parallel Mechanism, by Zhihuai Miao, Jieyu Wang and Bing Li --
Mechanisms for biomechanics and surgery --
An experimental characterization of human knee joint motion capabilities, by Michal Olinski, Marco Ceccarelli, Daniele Cafolla and Antoni Gronowicz --
An Innovative Parallel Robotic System for Transperineal Prostate Biopsy, by Bogdan Gherman, Nicolae Plitea and Doina Pisla --
A 2PRP-2PPR planar parallel Manipulator for the purpose of Lower Limb Rehabilitation, by Jayant Mohanta and Santhakumar Mohan --
Singularity Analysis of a Wall-mounted Parallel Robot with SCARA MotionsLower Limb Exoskeleton with Hybrid Pneumaticaly Assisted Electric Drive for Neuroreabilitation, by Anton Aliseychik, Elena Kolesnichenko, Victor Glazunov, Igor Orlov, Vladimir Pavlovsky and Natalia Petrovskaya --
Mechanism design and synthesis 2 --
An Adjustable Constant Force Mechanism Using Pin Joints and Springs, by Patrice Lambert and Just L. Herder --
Synthesis and optimisation of large stroke flexure hinges, by Martijn Grootens, Ronald Aarts and Dannis Brouwer --
On the grand 4R four-bar based inherently balanced linkage architecture, by Volkert van der Wijk --
Mechanism Analysis 2 --
A Workspace Analysis of 4R Manipulators Via Level-Set Formulation, by Matteo Russo and Marco Ceccarelli --
A constructive method for the approximation of the multiple inverse kinematics solutions of noncuspidal 6 DoF manipulators, by Vassilis Moulianitis, Dimitrios Vogiatzief and Nikos Aspragathos --
Single-loop Foldable 8R Mechanisms with Multiple Modes, by Jieyu Wang, Guochao Bai and Xianwen Kong --
Calibration of TCP-fixed bevel units, by Carsten Teichgraber, Maik Berger and Jorg Muglitz --
Industrial and non-industrial applications 2 --
Mechanism Type Synthesis Approach for Automated Handling and Multiaxial Draping of Reinforcing Textiles, by Jan Brinker, Jascha Paris, Mario Muller, Mathias Husing and Burkhard Corves --
Design of a Reciprocal Hip Mechanism with Adjustable Flexion-Extension Coupling Ratios for Prosthetic Applications, by Kuan-Han Chen and Jyh-Jone Lee --
Wind turbine based on antiparallel link mechanism, by Marat Dosaev, Lyubov Klimina and Yury Selyutskiy --
Model and analysis of a novel piezo-electric rotational motor based on deformation wave precession, by Marco Leonesio, Nicola Cau, Giacomo Bianchi and Paolo Bonfiglio --
Estimating characteristics of a contact between sensing element of medical robot and soft tissue, by Anastasya Yakovenko, Irina Goryacheva and Marat Dosaev --
Parallel manipulators 2 --
A coordinate-free dynamical model for cable-driven parallel robots, by Georges Le Vey --
Path Generation Synthesis of Planar Double-Slider Linkages via the Elliptic Coupler Curve, by Gokhan Kiper, Almina Akbalc?k and Zehra Betul Sen --
A Controller for Avoiding Dynamic Model Degeneracy of Parallel Robots during Type 2 Singularity Crossing, by Damien Six, Sebastien Briot, Abdelhamid Chriette and Philippe Martinet --
Singularity Analysis of a Wall-mounted Parallel Robot with SCARA Motions, by Guanglei Wu and Shaoping Bai --
Design of a Cable-Driven Four-Bar Mechanism for Arm Rehabilitation, by Talha Eraz and Gokhan Kiper. .
Рубрики: Machinery.
   Robotics.
   Automation.
   Manufactures.
   Machinery and Machine Elements.
   Robotics and Automation.
   Manufacturing, Machines, Tools, Processes.
Анотація: This book collects the most recent advances in mechanism science and machine theory with application to engineering. It contains selected peer-reviewed papers of the sixth International Conference on Mechanism Science, held in Nantes, France, 20-23 September 2016, covering topics on mechanism design and synthesis, mechanics of robots, mechanism analysis, parallel manipulators, tensegrity mechanisms, cable mechanisms, control issues in mechanical systems, history of mechanisms, mechanisms for biomechanics and surgery and industrial and nonindustrial applications.

Перейти: https://doi.org/10.1007/978-3-319-44156-6

Дод.точки доступу:
Wenger, Philippe. \ed.\; Flores, Paulo. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

16.

    Ganguli, Ranjan.
    Finite Element Analysis of Rotating Beams [[electronic resource] :] : physics Based Interpolation / / Ranjan. Ganguli ; . - 1st ed. 2017. - [S. l. : s. n.]. - XII, 283 p. 108 illus., 19 illus. in color. - Б. ц.
    Зміст:
Introduction --
Stiff String Basis Functions --
Rational Interpolation Functions --
Fourier-p Superelement --
Physics Based Basis Functions --
Collocation Approach --
Rotor Blade Finite Element --
Spectral Finite Element Method --
Violin String Shape Functions --
Appendix A: Stiffness Matrix --
Appendix B: MATLAB Code --
Appendix C: Governing Equation for Rotating Timoshenko Beam.
Рубрики: Machinery.
   Machinery and Machine Elements.
Анотація: This book addresses the solution of rotating beam free-vibration problems using the finite element method. It provides an introduction to the governing equation of a rotating beam, before outlining the solution procedures using Rayleigh-Ritz, Galerkin and finite element methods. The possibility of improving the convergence of finite element methods through a judicious selection of interpolation functions, which are closer to the problem physics, is also addressed. The book offers a valuable guide for students and researchers working on rotating beam problems – important engineering structures used in helicopter rotors, wind turbines, gas turbines, steam turbines and propellers – and their applications. It can also be used as a textbook for specialized graduate and professional courses on advanced applications of finite element analysis.

Перейти: https://doi.org/10.1007/978-981-10-1902-9

Дод.точки доступу:
Ganguli, Ranjan. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

17.

    Mechanism and Machine Science [[electronic resource] :] : proceedings of ASIAN MMS 2016 & CCMMS 2016 / / ed.: Zhang, Xianmin., Wang, Nianfeng., Huang, Yanjiang. - 1st ed. 2017. - [S. l. : s. n.]. - XV, 1565 p. 924 illus., 572 illus. in color. - Б. ц.
    Зміст:
Robotics and Mechatronics --
Mechanism Design --
Compliant Mechanism --
Reconfigurable Mechanism --
Kinematics --
Dynamics of Machinery --
Joint Clearance --
Gear and Transmissions --
MISC: Sensor, Actuator, Linkage, and Cam.
Рубрики: Machinery.
   Control engineering.
   Robotics.
   Mechatronics.
   Engineering design.
   Machinery and Machine Elements.
   Control, Robotics, Mechatronics.
   Engineering Design.
Анотація: These proceedings collect the latest research results in mechanism and machine science, intended to reinforce and improve the role of mechanical systems in a variety of applications in daily life and industry. Gathering more than 120 academic papers, it addresses topics including: Computational kinematics, Machine elements, Actuators, Gearing and transmissions, Linkages and cams, Mechanism design, Dynamics of machinery, Tribology, Vehicle mechanisms, dynamics and design, Reliability, Experimental methods in mechanisms, Robotics and mechatronics, Biomechanics, Micro/nano mechanisms and machines, Medical/welfare devices, Nature and machines, Design methodology, Reconfigurable mechanisms and reconfigurable manipulators, and Origami mechanisms. This is the fourth installment in the IFToMM Asian conference series on Mechanism and Machine Science (ASIAN MMS 2016). The ASIAN MMS conference initiative was launched to provide a forum mainly for the Asian community working in Mechanism and Machine Science, in order to facilitate collaboration and improve the visibility of activities in the field. The series started in 2010 and the previous ASIAN MMS events were successfully held in Taipei, China (2010), Tokyo, Japan (2012), and Tianjin, China (2014). ASIAN MMS 2016 was held in Guangzhou, China, from 15 to 17 December 2016, and was organized by the South China University under the patronage of the IFToMM and the Chinese Mechanical Engineering Society (CMES). The aim of the Conference was to bring together researchers, industry professionals and students from the broad range of disciplines connected to Mechanism Science in a collegial and stimulating environment. The ASIAN MMS 2016 Conference provided a platform allowing scientists to exchange notes on their scientific achievements and establish new national and international collaborations concerning the mechanism science field and its applications, mainly but not exclusively in Asian contexts.

Перейти: https://doi.org/10.1007/978-981-10-2875-5

Дод.точки доступу:
Zhang, Xianmin. \ed.\; Wang, Nianfeng. \ed.\; Huang, Yanjiang. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

18.

    Ghosh, Prakriti Kumar.
    Pulse Current Gas Metal Arc Welding [[electronic resource] :] : characteristics, Control and Applications / / Prakriti Kumar. Ghosh ; . - 1st ed. 2017. - [S. l. : s. n.]. - XXV, 322 p. 294 illus. - Б. ц.
    Зміст:
Introduction to Gas Metal Arc Welding --
Concept of Pulse Current Gas Metal Arc Welding Process --
Basic Nature of Pulse Current GMA Welding --
Thermal Behaviour of Pulse Current Gas Metal Arc Weld --
Geometry of Pulse Current GMA Weld --
Characteristics of P-GMA Weld Joint --
Properties of Pulse Current GMA Weld --
Prospective Use of Pulse Current GMAW Process --
Advanced Power Source and Process Control.
Рубрики: Manufactures.
   Machinery.
   Tribology.
   Corrosion and anti-corrosives.
   Coatings.
   Manufacturing, Machines, Tools, Processes.
   Machinery and Machine Elements.
   Tribology, Corrosion and Coatings.
Анотація: This monograph is a first-of-its-kind compilation on high deposition pulse current GMAW process. The nine chapters of this monograph may serve as a comprehensive knowledge tool to use advanced welding engineering in prospective applications. The contents of this book will prove useful to the shop floor welding engineer in handling this otherwise critical welding process with confidence. It will also serve to inspire researchers to think critically on more versatile applications of the unique nature of pulse current in GMAW process to develop cutting edge welding technology.

Перейти: https://doi.org/10.1007/978-981-10-3557-9

Дод.точки доступу:
Ghosh, Prakriti Kumar. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

19.

    Yan, Liang.
    Electromagnetic Linear Machines with Dual Halbach Array [[electronic resource] :] : design and Analysis / / Liang. Yan, Zhang, Lu. [et al.] ; . - 1st ed. 2017. - [S. l. : s. n.]. - XXIII, 125 p. 90 illus., 59 illus. in color. - Б. ц.
    Зміст:
Introduction --
Working Principle and Pole Arrays --
Magnetic Field Modeling --
Mathematical Modeling of Output Force --
Mathematical Modeling of Inductance --
Comparison between Analytical Models and Finite Element Results --
Design Optimization of Linear Machines --
Prototype Development and Experiments.
Рубрики: Applied mathematics.
   Engineering mathematics.
   Machinery.
   Computer mathematics.
   Computer simulation.
   Mathematical and Computational Engineering.
   Machinery and Machine Elements.
   Computational Mathematics and Numerical Analysis.
   Simulation and Modeling.
Анотація: This book extends the conventional two-dimensional (2D) magnet arrangement into 3D pattern for permanent magnet linear machines for the first time, and proposes a novel dual Halbach array. It can not only effectively increase the radial component of magnetic flux density and output force of tubular linear machines, but also significantly reduce the axial flux density, radial force and thus system vibrations and noises. The book is also the first to address the fundamentals and provide a summary of conventional arrays, as well as novel concepts for PM pole design in electric linear machines. It covers theoretical study, numerical simulation, design optimization and experimental works systematically. The design concept and analytical approaches can be implemented to other linear and rotary machines with similar structures. The book will be of interest to academics, researchers, R&D engineers and graduate students in electronic engineering and mechanical engineering who wish to learn the core principles, methods, and applications of linear and rotary machines.

Перейти: https://doi.org/10.1007/978-981-10-2309-5

Дод.точки доступу:
Zhang, Lu.; Peng, Juanjuan.; Zhang, Lei.; Jiao, Zongxia.; Yan, Liang. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

20.

    Neo, Dennis Wee Keong.
    Ultraprecision Machining of Hybrid Freeform Surfaces Using Multiple-Axis Diamond Turning [[electronic resource] /] : монография / Dennis Wee Keong. Neo ; . - 1st ed. 2017. - [S. l. : s. n.]. - XVIII, 115 p. 97 illus. - Б. ц.
    Зміст:
Introduction --
Literature review --
Initial Development of CAD/CAM Technologies --
Development of Hybrid FTS/SSS Diamond Turning --
Novel Surface Generation of Complex Hybrid Freeform Surfaces --
Development of Surface Analytical Model for Accurate Hybrid Freeform Surfaces --
Integration and Implementation --
Conclusions and Recommended Future Works.
Рубрики: Manufactures.
   Machinery.
   Manufacturing, Machines, Tools, Processes.
   Machinery and Machine Elements.
   Manufacturing, Machines, Tools, Processes.
Анотація: This thesis focuses on producing hybrid freeform surfaces using an advanced diamond-turning process, understanding the generation of surface accuracies (form errors) and how the choice of cutting strategies affects these, as well as simplifying the complications of generating cutting paths for such freeform surfaces. The breakthroughs behind this thesis are the development of novel, multiple-axis, diamond turning techniques to overcome the limitations of conventional diamond turning processes, an analytical model to optimize the generation of ultraprecise freeform surfaces, and an add-on tool path processor for CAD/CAM software solutions. It appeals to researchers and scholars with a strong machining background who are interested in the field of manufacturing ultraprecise freeform surfaces or in the field of optimizing ultraprecision machining processes.

Перейти: https://doi.org/10.1007/978-981-10-4083-2

Дод.точки доступу:
Neo, Dennis Wee Keong. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі

1-20 21-31

© Міжнародна Асоціація користувачів і розробників електронних бібліотек і нових інформаційних технологій
(Асоціація ЕБНІТ)