Головна Спрощенний режим Опис Шлюз Z39.50
Авторизація
Прізвище
Пароль
 

Бази даних


Доступ до повнотекстових книг Springer Nature (через IP-адреси БДМУ) - результати пошуку

Вид пошуку
К Н И Г И
Періодичні видання
Дисертації та автореферати
Фонд рідкісних видань
Електронна Навчальна література
Публікації засновників кафедр БДМУ
Нововведення у сфері охорони здоров'я
Календар пам'ятних дат
Доступ до повнотекстових книг Springer Nature (через IP-адреси БДМУ)
Зона пошуку
у знайденому
Формат представлення знайдених документів:
повнийінформаційнийкороткий
Відсортувати знайдені документи за:
авторомназвоюроком виданнятипом документа
Пошуковий запит: (<.>S=Engineering—Materials.<.>)
Загальна кiлькiсть документiв : 48
Показанi документи с 1 за 20
 1-20    21-40   41-48 
1.


   
    8th International Symposium on High-Temperature Metallurgical Processing [[electronic resource] /] : монография / ed. Hwang, Jiann-Yang. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XXII, 818 p. 421 illus. - Б. ц.
    Зміст:
Part 1: Energy Efficient Clean Metallurgical Technology --
Flash Ironmaking from Magnetite Concentrate in a Laboratory Reactor: Experimental and CFD Work --
Synthesis of Chromite for Subsequent Carburization by Methane-hydrogen Gas Mixture --
Effects of Hydrogen-enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens under BF Operation with Cog Injection --
Microwave-intensified Reduction of Biochar-containing Briquettes --
Refractory Challenges in Lead Recycling Furnaces --
Synthesis of Carbide Ceramics via Reduction of Adsorbed Anions on an Activated Carbon Matrix --
Part 2: Simulation of High Temperature Process --
A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2+CO Mixtures in a Drop Tube Reactor --
A Continuous Dynamic Process Model to Design a Carbon Profile toward Yield Improvement --
Alloy Yield Prediction Model Based on the Data Analysis in EAF Steelmaking Process --
Analysis of Jet Behavior and Surface Fluctuations in the Meniscus of Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling --
CFD Study of Gas-liquid Phase Interaction Inside a Submerged Lance Smelting Furnace for Copper Smelting --
Debottlenecking High Temperature Metallurgical Plants through Modeling and Simulation --
Assessment of Slag Entrainment in a RH Degasser through Physical Modelling Using Circulating Fluids of Different Densities/Oil Systems for Simulating Steel Melt/Slag --
Part 3: Fundamental Research of Metallurgical Process --
Investigate on the Phase Composition of Vanadium Slag with High CaO Content and Influence of P2O5 on Crystallization Kinetics of Spinels --
Thermal Analysis Kinetics of the Solid-State Reduction of Nickel Laterite Ores by Carbon --
Thermodynamic and Experimental Investigations of High Temperature Refractory Corrosion by Molten Slags --
Thermodynamic Calculation on the Reactivity between Slag and Ti-stabilized Stainless Steel --
Part 4: Alloys and Materials Preparation --
Development of a Novel, Low-cost Titanium Extraction Process for Bulk or Powder Applications --
Evolution of Non-metallic Inclusions in Solid Fe-Al-Ti-N Alloy during Heating --
Preparation of Low-carbon Ti2O3 by Carbon thermal Reduction of the Mixture of Titanium Dioxide and Activated Carbon under Vacuum Condition --
Pyrometallurgical Studies for Manganese Extraction Using Turkish Ore Reserves --
Trace Elements Behavior during the Oxidation of Liquid SiMn Alloy --
Effect of Microalloy Elements V And Mg on Organization at High Heat Input Welding Shipbuilding Structure Steel --
Part 5: Extraction and Recovery of Metals --
Effect of Carbon Reductant On The Formation of Copper Doped Titanium Oxycarbonitride by Carbothermal Reduction and Nitridation --
Cohering Behavior of Scrap Powder in Kiln by a Novel Natural Stacking Method --
Direct-to-blister Copper Smelting with the ISASMELT™ Process --
Improving Separation of Cu-Fe from Copper Slag by Mineral Phase Reconstruction --
Phase Transformation of High Calcium Type Tin, Iron-bearing Tailings during Magnetizing Roasting Process --
Sensitivity of Contactless Ultrasound Processing to Variations of the Free Surface of the Melt with Induction Heating --
Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-leaching Process --
Part 6: Ironmaking and Steelmaking --
Influence of Puhrstahl Heraeus Refining Process on Aluminum Consumption in Interstitial-Free Steel Smelting Process --
Formation Mechanisms of Inclusions in Spring Steels --
Investigation on Coal Combustion Behaviors under the Oxygen Blast Furnace --
Inclusion Control with Ca Treatment to Improve Castability of a Low Carbon Al Killed Steel --
High Temperature Mineralization Mechanism of Granules during Iron Ore Sintering Process --
Reduction Behaviors of Sinter Made from Magnetite Concentrates in Reducing Process Simulated COREX Shaft Furnace --
Part 7: Treatment and Recycling of Slag/Wastes --
Introduction of Matte Droplets in Copper Smelting Slag --
Dissolution Behavior of Fe from Glassy Oxide Phase in Steelmaking Slag --
Penetration Depth of Microwave in Tire Rubber --
Effect of TiO2 on Thermophysical Properties and Structure of P-bearing Steelmaking Slags --
Analysis for Optimum Conditions for Recovery of Valuable Metals from E-Waste through Black Copper Smelting --
Precipitation Behavior of MxTi3-xO5 in the Titanium-Bearing Electric Furnace Slag --
Part 8: Utilization of Complex Ores --
Evaluation of Molybdenum Concentrates --
Intensification of Gold Leaching from a Multi-refractory Gold Concentrate by the Two-stage Roasting-alkaline Sulfide Washing-cyanidation Process --
The Recovery of Cobalt from Copper Converter Slag by Reduction-sulfurization Smelting at High Temperature --
Roasting of Celestite in Laboratory Scale Rotary Furnace --
The Experimental Study of CaCO3 in the Vanadium Extraction Process --
The Extraction of Zinc from Zinc Ferrite by Calcified Roasting and Ammonia Leaching Process --
Part 8: Poster I --
A New Method to Detect the High Temperature Distribution in the Ironmaking and Steelmaking Industry --
A Study for Reconstructing the Three-dimensional Temperature Field of a Blast Furnace Raceway Based on Monte Carlo Method --
Behaviour of Silicon in Nickel Laterite by Carbothermic Reduction in Vacuum --
Effect of CaO Addition on the Behavior of Vanadium and Phosphorus during Oxidation and Leaching Process --
Effect of Inner Shape on Blast Furnace Performance for Iron Making --
Effect of Lance Configurations on Coal Flow and Combustion Characteristics --
Effect of Silicon on Removal of Phosphorus from High Phosphorus Si-Mn alloy by CaO-Based Slag --
Effect of Super Gravity on the Solidification Structure and C Segregation of High Carbon Steel --
High Temperature Distribution Measurement of the Blast Furnace Raceway through Imaging Techniques and Optimization Algorithms --
Kinetics and Reduction Behavior of Self-reducing Briquettes Containing Blast Furnace Dust --
Model Analysis of the Phenomena of Pulverized Coal Injection in Blast Furnace --
Sintering Performance of Blends Containing High Proportion of Limonite Iron Ore Fines --
Thermodynamics Study on Phosphorus Distribution between 2CaO•SiO2-3CaO•P2O5 Solid Solution and Liquid Slag --
Two-step Copper Smelting Process at Dongying Fangyuan --
Part 9: Poster II --
Comparison of the Ringing Characteristics between Acid and Alkaline Iron Ore Pellets Powder in Kiln --
Comprehensive Utilization of Ludwigite Iron Concentrate by Gas-based Direct Reduction --
Decarburization of Spent Petrochemical Catalysts via Microwave Oxidation Roasting --
Effect of FeO Content in Laterite Nickel Slag on the Corrosioin Behaviour of Refractory Materials --
Effects of Blowing Conditions on the Dispersion States of Materials Charged into Bottom Blown Oxygen Smelting Furnace --
Effects of Pre-oxidation and Additives on Carbothermic Reduction of Ilmenite Concentrate --
Influence of Converter Slag on Decomposition Behavior of Limestone during BOF Steelmaking Process --
Influence of Hot Charge on Blast Furnace Performance for Iron Making --
Investigation and Application of Evolution System of Stock Surface Gas Flow Distribution in Blast Furnace --
Investigation of the Carbothermic Reduction of Chromium-containing Vanadium Extraction Residue --
Molecular Dynamics Study of the Structural Properties with Varying --
One-step Extraction of Lead from Spent Lead-acid Battery Paste via Reductive Sulfur-fixing Smelting: Thermodynamic Analysis --
Removal of Cd(II) Ion from Aqueous Solution by Adsorption on Wasted Low Grade Phosphorus-containing Iron Ore --
Research on the Flow Behavior of Molten Slag through Pore --
Study on the Influence of Materials on Heat Transfer Characteristics of Blast Furnace Cooling Staves.
Рубрики: Materials science.
   Metals.
   Engineering—Materials.
   Characterization and Evaluation of Materials.
   Metallic Materials.
   Materials Engineering.
Анотація: This collection features contributions covering the advances and developments of new high-temperature metallurgical technologies and their applications to the areas of: processing of minerals; extraction of metals; preparation of metallic, refractory, and ceramic materials; treatment and recycling of slag and wastes; conservation of energy; and environmental protection. The volume will have a broad impact on the academics and professionals serving the metallurgical industries around the world by providing them with comprehensive coverage of a wide variety of topics.

Перейти: https://doi.org/10.1007/978-3-319-51340-9

Дод.точки доступу:
Hwang, Jiann-Yang. \ed.\; Jiang, Tao. \ed.\; Kennedy, Mark William. \ed.\; Yucel, Onuralp. \ed.\; Pistorius, P. Chris. \ed.\; Seshadri, Varadarajan. \ed.\; Zhao, Baojun. \ed.\; Gregurek, Dean. \ed.\; Keskinkilic, Ender. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
2.


   
    Energy Materials 2017 [[electronic resource] /] : монография / ed. Liu, Xingbo. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XXII, 457 p. 256 illus. - Б. ц.
    Зміст:
Part 1: Energy and Environmental Issues in Materials Manufacturing and Processing: Opportunities in the Steel Industry --
Waste Energy Recovery Technology of Iron and Steel Industry in China --
Green Manufacturing Process of Shougang Jingtang Steel Plant --
The Introduction and Process Optimization Research of Oxygen Blast Furnace Ironmaking Technology --
Prediction and optimal scheduling of byproduct gases in steel mill: Trends and challenges --
Processing Non-Oriented Electrical Steels Using Inclined/Skew Rolling Schemes --
A Possible Way for Efficient Utilization of Coal Energy: The Combined Process of Ironmaking with Gasoline Synthesis and Electricity Generation --
The influence of water vapour on the fuming rate in a ferromanganese system --
Part 2: Energy and Environmental Issues in Materials Manufacturing and Processing: Opportunities in Aluminum Production, Waste Heat and Water Recovery --
Approach for pyrolysis gas release modelling and its potential for enhanced energy efficiency of aluminium remelting furnaces --
Numerical approach for the implementation of the interaction of pyrolysis gases and combustion products in an aluminium melting furnace --
Fluoropolymer Coated Condensing Heat Exchangers for Low-grade Waste Heat Recovery --
Nitrate and other anion removal from waste water using the Hydroflex technology --
Mechanical Analysis of Raceway Formation in Bulk Bed of Blast Furnace --
Part 3: Materials for Coal-Based Power: Materials For Coal-Based Power: Session I --
Ni-Fe based alloy GH984G used for 700 coal-fired power plant --
Part 4: Materials for Coal-Based Power: Materials For Coal-Based Power: Session II --
Creep strength and oxidation resistance of industrially made G115 Steel pipe --
Accelerated creep test for new steels and welds --
Part 5: Materials for Coal-Based Power: Materials For Coal-Based Power: Session IV --
The Reliability Analysis of 12Cr1MoVG and T23 Used for USC Boilers Water Wall --
Part 6: Materials for Coal-Based Power: Poster Session --
Effect of high-frequency induction hardening on stress corrosion of a 12% Cr martensitic stainless steel --
Fireside corrosion behaviors of Inconel 740 H superalloy in various SO2 contents --
High Cycle Fatigue Behavior of HAYNES282 Superalloy --
Recent Development in the Characteristics of Alloy 625 for A-USC Steam Turbine Castings --
Part 7: Materials for Gas Turbines: Coatings --
EVOLUTION OF THE THERMAL CONDUCTIVITY OF Sm2Zr2O7 UNDER CMAS ATTACK --
Part 8: Materials for Gas Turbines: Hot Corrosion and New Materials --
Development of a new high strength and hot corrosion resistant directionally solidified superalloy DZ409 --
Part 9: Materials for Gas Turbines: Microstructure and Processing --
Modeling the Diffusion of Minor Elements in Different MCrAlY – Superalloy Substrates at High Temperature --
ON HEALING MECHANISM OF CAST POROSITIES IN CAST NI-BASED SUPERALLOY BY HOT ISOSTATIC PRESSING --
The Influence of Dendritic Segregation Degree to the Recrystallization Nucleation in U4720LI --
Part 10: Materials for Gas Turbines: Poster Session --
Stress Rupture Properties of Alloy 783 --
Study on the Undercoolability and Single Crystal Castability of Nickel-Based Superalloys --
Part 11: Materials for Nuclear Energy: Materials for Nuclear Applications I --
Enhancing the High-Cycle Fatigue Property of 316 Austenitic Stainless Steels through Introduction of Mechanical Twins by Cold-Drawing --
Part 12: Materials for Nuclear Energy: Materials for Nuclear Applications II --
Microstructure Evolution of a Reactor Pressure Vessel Steel during High-temperature Tempering --
Part 13: Materials for Nuclear Energy: Environmental Effects --
Effect of Steam Pressure on the Oxidation Behaviour of Alloy 625 --
Friction Stir Processing of Degraded Austenitic Stainless Steel Nuclear Fuel Dry Cask Storage System Canisters --
Part 14: Materials for Nuclear Energy: Accident Tolerant Fuels & Irradiation Effects --
The Mechanical Response of Advanced Claddings during Proposed Reactivity Initiated Accident Conditions --
First principles investigations of alternative nuclear fuels --
Comparative study of thermal conductivity of SiC and BeO from ab initio calculations --
Part 15: Materials for Oil and Gas and AMREE Oil & Gas III --
Anisotropic behaviors for X100 high grade pipeline steel under stress constraints --
Co-relation of microstructural features with tensile and toughness characteristics of X70 grade steel --
Development and applications of new generation Ni-containing cryogenic steels in China --
Microstructure analysis and weldability investigation of stainless steel clad plate --
Microstructure and Properties of High Performance Pipeline Steels --
Sensitivity variation of nanomaterials at different operating temperature conditions.
Рубрики: Materials science.
   Engineering—Materials.
   Energy systems.
   Characterization and Evaluation of Materials.
   Materials Engineering.
   Energy Systems.
Анотація: This collection highlights materials research and innovations for a wide breadth of energy systems and technologies. The volume includes papers organized into the following sections: Energy and Environmental Issues in Materials Manufacturing and Processing Materials in Clean Power Materials for Coal-Based Power Materials for Energy Conversion with Emphasis on SOFC Materials for Gas Turbines Materials for Nuclear Energy Materials for Oil and Gas.

Перейти: https://doi.org/10.1007/978-3-319-52333-0

Дод.точки доступу:
Liu, Xingbo. \ed.\; Liu, Zhengdong. \ed.\; Brinkman, Kyle. \ed.\; Das, Subodh. \ed.\; Dryepondt, Sebastien. \ed.\; Fergus, Jeffery W. \ed.\; Guo, Zhancheng. \ed.\; Han, Minfang. \ed.\; Hawk, Jeffrey A. \ed.\; Horita, Teruhisa. \ed.\; Hosemann, Peter. \ed.\; Li, Jian. \ed.\; Olivetti, Elsa. \ed.\; Pandey, Amit. \ed.\; Rebak, Raul B. \ed.\; Roy, Indranil. \ed.\; Shang, Chengjia. \ed.\; Zhang, Ji. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
3.


   
    Characterization of Minerals, Metals, and Materials 2017 [[electronic resource] /] : монография / ed. Ikhmayies, Shadia. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XXIX, 872 p. 480 illus. - Б. ц.
    Зміст:
Part 1: Soft Materials --
Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites --
Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique --
Izod impact tests in polyester matrix composites reinforced with blanket of the malva and jute fibers --
Tensile Behavior of Epoxy Matrix Composites Reinforced With Eucalyptus Fibers --
The dimensional characterization of jute fabric strips for reinforcement in composite polymeric --
Izod Toughness Behavior of Continuous PALF Fibers Reinforced Polyester Matrix Composites --
Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide --
Radiation Effects on Crosslinking of Butyl Rubber Compounds --
Part 2: Clays and Ceramics --
Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer --
Aging behaviour in Ni0.5CoxMn2.5-xO4 (x=0.5, 0.8 and 1.1) thermistors --
Adsorption of lead from aqueous solutions to bentonite and composite --
Part 3: Electronic, Magnetic, Environmental, and Advanced Materials --
Characterization Of Low-Zinc Electric Arc Furnace Dust --
GAMMA-RADIATION EFFECT ON BIODEGRADABILITY OF SYNTHETIC PLA STRUCTURAL FOAMS PP/HMSPP BASED --
STUDY OF FLEXIBLE FILMS PREPARED FROM PLA/PBAT BLEND AND PLA e-BEAM IRRADIATED AS COMPATIBILIZING AGENT --
Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method --
Part 4: Nano Materials --
Electrical and microstructural investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 temperature sensors --
Enhanced physical properties of thin film nanocomposites --
A study on the size and type of inclusions in Si-Mn combined deoxidated low carbon steel strip --
Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-powder Composites --
Part 5: Alloys --
Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101 --
MICROSTRUCTUAL INVESTIGATION AND IMPACT TESTING OF ADDITIVE MANUFACTURED TI-6AL-4V --
Part 6: Powders and Foams --
SYNTHESIS OF TiN NANO-COMPOSITE POWDER BY HIGH-ENERGY BALL MILLING OF TiH2 UNDER NITROGEN ATMOSPHERE --
Application of AFM in Morphology Determination of Powder Material --
Effects of Thermal Processing on Closed-Cell Aluminium Foams --
Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams under Drop Weight Impact --
Deformation Mechanisms of Closed Cell-Aluminium Foams during Drop Weight Impact --
Part 7: Minerals --
INDUSTRIAL USE OF BRAZILIAN BENTONITE MODIFIED BY MILD ACID ATTACK --
Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation --
Ore Dressing and Technological characterization of Palygorskite from Piaui/Brazil for applications as adsorbent of heavy metals --
TECHNOLOGICAL CHARACTERIZATION OF WASTE FROM GOLD MINING DAM --
Synthesis and Characterization of Sodalite and Cancrinita from Kaolin --
Part 8: Ferrous Metals --
Effects of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter --
Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis --
Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO-CO2 Atmospheres --
Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors --
Important Factors to Consider in FIB Milling of Crystalline Materials --
Part 9: Material Processing and Corrosion --
Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl media --
Effect of bromide ions on the pitting corrosion of hafnium in anhydrous t-butanol and acetonitrile --
Compression Behavior of Semi-Closed Die Forged AZ80 Extrusion --
Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique --
Part 10: Method Development --
Development of A New Recycling Process of PGM from Metal-supported Catalyst Using Complex Oxide --
Part 11: Composites --
High thermal conducting composites using percolation theory --
SORPTION CHARACTERISTICS OF LOW DENSITY POLYETHYLENE/KOLA NUT COMPOSITE --
Residual Stress Analysis within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction --
Tensile Behavior of Epoxy Matrix Composites Reinforced With Pure Ramie Fabric --
Hemp Fiber Density Using the Pycnometer Technique --
Preparation and Characterization of Clay Exfoliation and Vegetal fibre on Properties of Recycled Low Density Polyethylene (rLDPE) --
Part 12: Ferrous Metals --
Estimation of Dislocation Density in Metals from Microhardness Test --
Part 13: Welding and Solidification --
Interfacial strength characterization in a high-modulus low-density steel-based Fe-TiB2 composite --
Part 14: Materials Extractions --
Leaching of Copper-Cobalt Tailings from the Democratic Republic of Congo --
OPTIMUM OPERATING CONDITIONS FOR EXTRACTION OF LIGNIN PRECURSORS FROM PALM FRUIT BUNCH --
SELECTION ON THE PROCESS FOR ENRICHING GOLD FROM REFRACTORY GOLD ORES BY SMELTING --
SELECTION ON THE PROCESS FOR REMOVING AND RECOVERING ANTIMONY FROM ANTIMONIAL REFRACTORY GOLD ORES --
Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings --
CHARACTERIZATION OF SPENT PRINTED CIRCUIT BOARDS FROM COMPUTERS --
Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte --
Part 15: Poster Session --
Addition of Cellulose Nanofibers in Reactive Powder Concrete --
ADVANCED ION COLUMN SOLUTION FOR LOW ION DAMAGE CHARACTERIZATION AND ULTRA-FINE PROCESS --
Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise --
Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal --
Characteristics of stamp charging coke and top charging coke --
Characterization and leaching proposal of Ag ( I) from a Zn concentrate --
Characterization and Mechanical Properties of Additively Manufactured Stainless Steel 316L --
CHARACTERIZATION OF MERCURY JAROSITE --
Characterization of steel production dust and their use in structural ceramics --
CHARPY TOUGHNESS BEHAVIOR OF JUTE FABRIC REINFORCED POLYESTER MATRIX COMPOSITES --
Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo --
Contribution to the ? relaxation study of the HDPE, LDPE and LLDPE --
Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES --
Effects of wet grinding on the structure and granularity of biological origin aragonite and its polymorphic transformation into calcite --
EVALUATION OF BALLISTIC ARMOR BEHAVIOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS --
EVALUATION OF THE POZZOLANIC ACTIVITY OF RESIDUE FROM THE PAPER INDUSTRY --
EVALUATION OF THE PROPERTIES OF THE ADHESIVE MORTAR IN THE FRESH STATE WITH ADDITION OF GLASS WASTE --
Experimental Evaluation of the Influence of Mortar’s Mechanical Properties on The Behavior of Clay Masonry --
Influence of Operation Conditions on Normal Stress and Flow Pattern of Burden Materials in Blast Furnace Based on Discrete Element Method --
Polymer Blend based on recycled polyethylene and ethylene vinyl acetate copolymers reinforced with natural fibers from agricultural wastes --
Preliminary study of the effect of stirring rate, temperature and oxygen pressure on the leach rate of copper powder, generated by grinding of printed circuit boards of computer --
Preparation and Characterization of Polyethylene Nanocomposites with Clay and Silver Nanoparticles --
Production of concrete interlocking blocks with partial replacement of sand in bulk by waste glass machined --
Reactive Powder Concrete Production with the Addition of Granite Processing Waste --
Research on the reason of the different type of chloride forming in the process of blast furnace ironmaking --
Stress and Deformation Analysis of Hot Blast Stove Piping System --
Stress and Deformation Analysis of Top Combustion Hot Blast Stove Shell --
STUDY OF CALCINED MIXTURES FROM INDUSTRIAL RESIDUES FOR PRODUCTION OF AGGLOMERATES --
STUDY OF SYNERGISTIC EFFECT OF LIGHT STABILIZER ADDITIVE, CONVENTIONAL AND NANOPARTICLES, APPLIED TO POLYETHYLENE FILMS SUBMITTED TO ULTRAVIOLET RADIATION --
Study of the effect of surface liquid flow during column flotation of mining tailing of the Dos Carlos dam --
STUDY ON BENDING TEST ON CONCRETE STRUCTURAL USE CRUMB RUBBER AS SUBSTITUTE IN FINE AGGREGATE --
Synthesis and structural characterization of BaTiO3 doped with Gd3+ --
Texture analysis and anisotropic properties of a rolled CuZn36 brass alloy --
The influence of titanium content on the sinter ore phase structure and the crack --
The use of Network Simplex method for planning the incorporation of recycled paper mill sludge in manufacturing of ceramic bodies --
USE OF ALKALINE SOLID WASTES FROM KRAFT PULP AND PAPER MILLS, DREGS AND GRITS IN CEMENT PRODUCTION --
Wood-to-concrete joints using steel connectors: experimental evaluation.
Рубрики: Materials science.
   Structural materials.
   Engineering—Materials.
   Characterization and Evaluation of Materials.
   Structural Materials.
   Materials Engineering.
Анотація: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Coverage is well-rounded from minerals, metals, and materials characterization and developments in extraction to the fabrication and performance of materials. In addition, topics as varied as structural steels to electronic materials to plant-based composites are explored. The latest research presented in this wide area make this book both timely and relevant to the materials science field as a whole. The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials. Topics covered include ferrous materials, non-ferrous materials, minerals, ceramics, clays, soft materials, method development, processing, corrosion, welding, solidification, composites, extraction, powders, nanomaterials, advanced materials, and several others.

Перейти: https://doi.org/10.1007/978-3-319-51382-9

Дод.точки доступу:
Ikhmayies, Shadia. \ed.\; Li, Bowen. \ed.\; Carpenter, John S. \ed.\; Li, JIan. \ed.\; Hwang, Jiann-Yang. \ed.\; Monteiro, Sergio Neves. \ed.\; Firrao, Donato. \ed.\; Zhang, Mingming. \ed.\; Peng, Zhiwei. \ed.\; Escobedo-Diaz, Juan P. \ed.\; Bai, Chenguang. \ed.\; Kalay, Yunus Eren. \ed.\; Goswami, Ramasis. \ed.\; Kim, Jeongguk. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
4.


    Yeo, Reuben Jueyuan.
    Ultrathin Carbon-Based Overcoats for Extremely High Density Magnetic Recording [[electronic resource] /] : монография / Reuben Jueyuan. Yeo ; . - 1st ed. 2017. - [S. l. : s. n.]. - XVIII, 167 p. 90 illus., 23 illus. in color. - Б. ц.
    Зміст:
Introduction --
Overview of Amorphous Carbon Films --
Overcoat Fabrication and Characterization --
Optimization of Ultrathin Carbon Overcoats on Hard Disk Media --
Development of a Protective Sinx/C Bilayer Overcoat for Hard Disk Media --
Wear-Durable Protective Overcoats for Functional Tape Heads --
Graphene as a Protective Overcoat for Hard Disk Media --
Conclusions and Future Work.
Рубрики: Materials—Surfaces.
   Thin films.
   Magnetism.
   Magnetic materials.
   Engineering—Materials.
   Surfaces and Interfaces, Thin Films.
   Magnetism, Magnetic Materials.
   Materials Engineering.
Анотація: This book presents the latest research in ultrathin carbon-based protective overcoats for high areal density magnetic data storage systems, with a particular focus on hard disk drives (HDDs) and tape drives. These findings shed new light on how the microstructure and interfacial chemistry of these sub-20 nm overcoats can be engineered at the nanoscale regime to obtain enhanced properties for wear, thermal and corrosion protection – which are critical for such applications. Readers will also be provided with fresh experimental insights into the suitability of graphene as an atomically-thin overcoat for HDD media. The easy readability of this book will appeal to a wide audience, ranging from non-specialists with a general interest in the field to scientists and industry professionals directly involved in thin film and coatings research.

Перейти: https://doi.org/10.1007/978-981-10-4882-1

Дод.точки доступу:
Yeo, Reuben Jueyuan. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
5.


   
    Materials Design and Applications [[electronic resource] /] : монография / ed. Silva, Lucas F. M. da. - 1st ed. 2017. - [S. l. : s. n.]. - X, 431 p. 269 illus., 175 illus. in color. - Б. ц.
    Зміст:
Selected Properties of P/M Ti-6Al-2Sn-4Zr-6Mo Alloy after Hot Deformation --
Positron Annihilation Study on Nanocrystalline Copper Thin Films Doped with Nitrogen --
The Influence of Microstructure on Mechanical Behaviour for Dual Phase Steels --
Application of Cutting Edges with High Durability Made of Nanocrystalline Cemented Carbides --
Development and Validation of a Numerical Model of a Carbon Orthotic for Lower Limbs --
Magnetic Pulse Welding of Dissimilar Materials: Aluminum–Copper.
Рубрики: Materials science.
   Engineering—Materials.
   Mechanics.
   Mechanics, Applied.
   Characterization and Evaluation of Materials.
   Materials Engineering.
   Solid Mechanics.
Анотація: This volume features fundamental research and applications in the field of the design and application of engineering materials, predominantly within the context of mechanical engineering applications. This includes a wide range of materials engineering and technology, including metals, e.g., polymers, composites, and ceramics. Advanced applications would include manufacturing in the new or newer materials, testing methods, multi-scale experimental and computational aspects. This book features fundamental research and applications in the design of engineering materials, predominantly within the context of mechanical engineering applications such as automobile, railway, marine, aerospace, biomedical, pressure vessel technology, and turbine technology. It covers a wide range of materials, including metals, polymers, composites, and ceramics. Advanced applications include the manufacturing of new materials, testing methods, multi-scale experimental and computational aspects. p.

Перейти: https://doi.org/10.1007/978-3-319-50784-2

Дод.точки доступу:
Silva, Lucas F. M. da. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
6.


   
    Materials Processing Fundamentals 2017 [[electronic resource] /] : монография / ed.: Allanore, Antoine., Lambotte, Guillaume., Lee, Jonghyun. - 1st ed. 2017. - [S. l. : s. n.]. - X, 146 p. 85 illus. - Б. ц.
    Зміст:
Part 1: Steelmaking --
Development of ultrahigh-basicity mold fluxes for peritectic steel continuous casting --
Part 2: Metal Extraction --
Applied statistical analysis on the calcination process in the ferronickel production --
The Chemical Stability and Electrochemical Behavior of Dy2O3 in Molten CaCl2 --
Part 3: Molten & Gas State Processing --
Influence of Oxygen on Surface Tension of Zr --
Part 4: Solid-State Processing --
Evaluation feature of Nano Grain Growth of TiO2 Thin Film via Sol- gel Route --
Part 5: Molten & Gas State Processing --
Thermal analyses of silver-based sulfosalts in air --
Oscillation of a Zirconium Droplet – Experiments and Numerical Simulations --
Gallium Evaporation Behavior for Purification in Molecular Beam Epitaxy (MBE) --
Mass Transfer of Al and Ca Between Silicon and Synthetic SiO2-CaO-Al2O3 Slags --
Part 6: Poster Session --
The interface characteristics of high-temperature melt of CaO-Al2O3-MgO-SiO2 system --
Effect of Modeling flows on Mixing Time in 40t Ladle with Bottom Gas Blowing Process --
Study Of Electrochemical Reactor Filter-Press Used In The Treatment Of Industrial Waste By COMSOL --
Genetic Influence of Mold Corner Structure on the Strand Corner Temperature in Secondary Cooling Zone during Slab Continuous Casting.
Рубрики: Materials science.
   Engineering—Materials.
   Metals.
   Characterization and Evaluation of Materials.
   Materials Engineering.
   Metallic Materials.
Анотація: Covering the physical and numerical modeling of materials processing, this book includes contributions across the range of metals and minerals. This collection offers a unique opportunity to present models and results for key processes involved in extraction, joining, separation, and casting of materials. The corresponding fundamentals of mass and heat transport as well as physical and thermodynamics properties are addressed, allowing for a cross-disciplinary vision of the field.

Перейти: https://doi.org/10.1007/978-3-319-51580-9

Дод.точки доступу:
Allanore, Antoine. \ed.\; Lambotte, Guillaume. \ed.\; Lee, Jonghyun. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
7.


   
    Electro-Chemo-Mechanics of Solids [[electronic resource] /] : монография / ed. Bishop, Sean R. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - IX, 192 p. 71 illus., 50 illus. in color. - Б. ц.
    Зміст:
Introduction --
Conventional Methods for Measurements of Chemo-Mechanical Coupling --
In-situ High-Temperature X-ray Diffraction of Thin Films: Chemical Expansion and Kinetics --
In-situ Neutron Diffraction Experiments --
In situ Wafer Curvature Relaxation Measurements to Determine Surface Exchange Coefficients and Thermo-Chemically Induced Stresses --
Exploring electro-Chemo-Mechanical Phenomena on the Nanoscale Using Scanning Probe Microscopy --
Continuum Level Transport and Electro-Chemo-Mechanics Coupling—Solid Oxide Fuel Cells and Lithium Ion Batteries.
Рубрики: Engineering—Materials.
   Ceramics.
   Glass.
   Composites (Materials).
   Composite materials.
   Optical materials.
   Electronic materials.
   Electrochemistry.
   Mechanics.
   Mechanics, Applied.
   Materials Engineering.
   Ceramics, Glass, Composites, Natural Materials.
   Optical and Electronic Materials.
   Electrochemistry.
   Solid Mechanics.
Анотація: This book brings together a collection of chapters that focus on the relationship among electrical, chemical, and mechanical properties and the study of adjusting one property through the control of another, namely, Electro-Chemo-Mechanics (ECM). The authors examine how this relationship can result in beneficial properties, such as mixed ionic and electronic conductivity, in oxides, upon oxygen deficiency or lithium insertion (electro-chemo) and/or changes in ionic and electronic mobility observed in strained systems (electro-mechano). They also consider how ECM interactions can be responsible for large stresses from non-stoichiometry induced lattice dilation (chemo-mechano). While many volumes are available devoted to the study of the origins and characteristics of electro-chemical relationships, they form the well-known field of electrochemistry, this volume is highly novel in its examination of the corresponding electro-mechanical, chemo-mechanical, and electro-chemo-mechanical relationships. The book is ideal for researchers and design engineers interested in energy storage and conversion and the electrical and mechanical properties of materials.

Перейти: https://doi.org/10.1007/978-3-319-51407-9

Дод.точки доступу:
Bishop, Sean R. \ed.\; Perry, Nicola H. \ed.\; Marrocchelli, Dario. \ed.\; Sheldon, Brian W. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
8.


   
    Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) [[electronic resource] /] : монография / ed. Mason, Paul. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XVI, 381 p. 200 illus. - Б. ц.
    Зміст:
An Attempt to Integrate Software Tools at Microscale and Above Towards an ICME Approach for Heat Treatment of a DP Steel Gear with Reduced Distortion --
Integrated Microstructure based Modelling of Process-Chain for Cold Rolled Dual Phase Steels --
Improving Manufacturing Quality using Integrated Computational Materials Engineering --
ICME Based Hierarchical Design Using Composite Materials for Automotive Structures --
Towards Bridging the Data Exchange Gap Between Atomistic Simulations and Larger Scale Models --
A Flowchart Scheme for Information Retrieval in ICME settings --
An Ontological Framework for Integrated Computational Materials Engineering --
European Materials Modelling Council --
Facilitating ICME through Platformization --
Bridging the Gap between Bulk Properties and Confined Behavior using Finite Element Analysis --
Ontology Dedicated to Knowledge-driven Optimization for ICME Approach --
Integration of Experiments and Simulations to Build Material Big-Data --
ICME-based Process and Alloy Design for Vacuum Carburized Steel Components with High Potential of Reduced Distortion --
Study of Transient Behavior of Slag Layer in Bottom Purged Ladle: A CFD Approach --
Developing Cemented Carbides through ICME --
CSUDDCC2: An Updated Diffusion Database for Cemented Carbides --
Multi-Scale Modeling of Quasi-Directional Solidification of a Cast Si-rich Eutectic Alloy --
Numerical Simulation of Macrosegregation in a 535 Tons Steel Ingot with a Multicomponent-Multiphase Model --
Validation of CAFE Model with Experimental Macroscopic Grain Structures in a 36-ton Steel Ingot --
Analysis of Localized Plastic Strain in Heterogeneous Cast Iron Microstructures using 3D Finite Element Simulations --
An Integrated Solidification and Heat Treatment Models for Predicting Mechanical Properties of Cast Aluminum Alloy Component --
Linked Heat Treatment and Bending Simulation of Aluminum Tailored Heat Treated Profiles --
Numerical Simulation of Meso-micro structure in Ni-based Superalloy during Liquid Metal Cooling Process --
Multiscale Simulation of \\945-Mg dendrite growth via 3D Phase Field Modeling and Ab-initio First Principle Calculations --
Macro- and Micro-simulation and Experiment Study on Microstructure and Mechanical Properties of Squeeze Casting Wheel of Magnesium Alloy --
Solidification Simulation of Fe-Cr-Ni-Mo-C Duplex Stainless Steel using CALPHAD-coupled Multi-phase-field Model with Finite Interface Dissipation --
Phase-field Modeling of ?’ Precipitation Kinetics in W319 Alloys --
Hybrid Hierarchical Model for Damage and Fracture Analysis in Heterogeneous Material --
Fatigue Performance Prediction of Structural Materials by Multi-Scale Modeling and Machine Learning --
Nano Simulation Study of Mechanical Property Parameter for Microstructure-based Multiscale Simulation --
Multiscale, Coupled Chemo-mechanical Modeling of Bainitic Transformation during Press Hardening --
Development of Microstructure-based Multiscale Simulation Process for Hot Rolling of Duplex Stainless Steel --
A Decision-Based Design Method to Explore the Solution Space for Microstructure after Cooling Stage to Realize the End Mechanical Properties of the Rolled Product --
Influence of Computational Grid and Deposit Volume on Residual Stress and Distortion Prediction Accuracy for Additive Manufacturing Modeling.
Рубрики: Materials science.
   Applied mathematics.
   Engineering mathematics.
   Engineering—Materials.
   Characterization and Evaluation of Materials.
   Mathematical and Computational Engineering.
   Materials Engineering.
Анотація: This book represents a collection of papers presented at the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017), a specialty conference organized by The Minerals, Metals & Materials Society (TMS). The contributions offer topics relevant to the global advancement of ICME as an engineering discipline. Topics covered include the following: ICME Success Stories and Applications Verification, Validation, Uncertainty Quantification Issues and Gap Analysis Integration Framework and Usage Additive Manufacturing Phase Field Modeling Microstructure Evolution ICME Design Tools and Application Mechanical Performance Using Multi-Scale Modeling.

Перейти: https://doi.org/10.1007/978-3-319-57864-4

Дод.точки доступу:
Mason, Paul. \ed.\; Fisher, Charles R. \ed.\; Glamm, Ryan. \ed.\; Manuel, Michele V. \ed.\; Schmitz, Georg J. \ed.\; Singh, Amarendra K. \ed.\; Strachan, Alejandro. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
9.


   
    Materials, Energy and Environment Engineering [[electronic resource] :] : select Proceedings of ICACE 2015 / / ed.: Mohan B., Raj., Srinikethan, G., Meikap, Bhim Charan. - 1st ed. 2017. - [S. l. : s. n.]. - XIII, 316 p. 161 illus. - Б. ц.
Рубрики: Biomaterials.
   Engineering—Materials.
   Environmental engineering.
   Biotechnology.
   Catalysis.
   Biomaterials.
   Materials Engineering.
   Environmental Engineering/Biotechnology.
   Catalysis.
Анотація: This edited volume comprises the proceedings of ICACE-2015. In the recent past Chemical Engineering as a discipline has been diversifying into several frontier areas and this volume addresses the advances in core Chemical Engineering as well as allied fields. The contents of this volume focus on energy and environmental applications of chemical engineering research and on materials science aspects of chemical engineering. This book will be useful to researchers, students, and professionals, particularly those working on interdisciplinary applications of Chemical Engineering problems. .

Перейти: https://doi.org/10.1007/978-981-10-2675-1

Дод.точки доступу:
Mohan B., Raj. \ed.\; Srinikethan, G. \ed.\; Meikap, Bhim Charan. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
10.


   
    Submicron Porous Materials [[electronic resource] /] : монография / ed. Bettotti, Paolo. - 1st ed. 2017. - [S. l. : s. n.]. - XII, 346 p. 152 illus., 115 illus. in color. - Б. ц.
    Зміст:
Structured and Surface-Modified Carbon Xerogel Electrodes for Capacitive Deionization --
Carbon Gels and Their Applications: A Review of Patents --
Robust Mesoporous Polymers Derived from Cross-linked Block Polymer Precursors --
Melt-stretching Polyolefin Microporous Membrane --
AAO Templates with Different Patterns and Channel Shapes --
Porous Thin Film from Sol-Gel --
Synthesis Strategies and Emerging Catalytic Applications of Siliceous Materials with Hierarchically Ordered Porosity --
Porous Silicon: From Optical Sensor to Drug Delivery System --
Modeling Thermal Transport in Nanoporous Semiconductors --
Scale transition for Mass Transport in Porous Structures --
Positron Beam-Based Ortho-Positronium Porosimetry.
Рубрики: Nanotechnology.
   Engineering—Materials.
   Fluid mechanics.
   Biotechnology.
   Nanotechnology.
   Materials Engineering.
   Engineering Fluid Dynamics.
   Microengineering.
Анотація: This book covers the latest research on porous materials at the submicron scale and inspires readers to better understand the porosity of materials, as well as to develop innovative new materials. A comprehensive range of materials are covered, including carbon-based and organic-based porous materials, porous anodic alumina, silica, and titania-based sol-gel materials. The fabrication, characterization, and applications of these materials are all explored, with applications ranging from sensors, thermoelectrics, catalysis, energy storage, to photovoltaics. Also of practical use for readers are chapters that describe the basics of porous silicon fabrication and its use in optical sensing and drug delivery applications; how thermal transport is affected in porous materials; how to model diffusion in porous materials; and a unique chapter on an innovative spectroscopic technique used to characterize materials' porosity. This is an ideal book for graduate students, researchers, and professionals who work with porous materials.

Перейти: https://doi.org/10.1007/978-3-319-53035-2

Дод.точки доступу:
Bettotti, Paolo. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
11.


   
    Light Metals 2017 [[electronic resource] /] : монография / ed. Ratvik, Arne P. - 1st ed. 2017. - [S. l. : s. n.]. - XXIX, 1492 p. 1429 illus. - Б. ц.
    Зміст:
Part 1: Alumina & Bauxite: Digestion and Calcination --
CFB Alumina Calciners - New and Future Generation Opportunities for Green Field Refineries --
Evolutional Development of Alkaline Aluminosilicates Processing Technology --
Characterization and Ore Dressing of Bauxite from Brazil --
Process Optimization for Diaspore Digestion Equilibrium using Response Surface Methodology --
Thermodynamic analysis and formation law of Q phase of calcium aluminate clinker --
Leaching Behavior of Alumina from Smelting Reduction Calcium Aluminate Slag with Sodium Carbonate Solution --
Part 2: Alumina & Bauxite: Bauxite Residues Technology --
Security Disposal and Comprehensive Utilization of Bauxite Residues --
Bauxite Residue Amendment Through the Addition of Ca and OR Mg Followed By Carbonation --
Application of Tricalcium Aluminate Instead of Lime for the recovery of aluminum in Middle-low Grade Bauxite in Calcification-Carbonization Process --
Low Temperature Reduction of Hematite in Red-Mud to Magnetite --
Recovery of Iron-, Titanium-bearing Constituents from Bauxite Ore Residue via Magnetic Separation Followed by Sulfuric Acid Leaching --
Processing diasporic red mud by the calcification-carbonation method --
Research of Flocculants and Dewatering Additives for Filtration of Red Mud --
Characterization of activated alumina production via spray pyrolysis --
Part 3: Alumina & Bauxite: Non-traditional Resources --
New process research on aluminium production from non-traditional aluminum resource by microwave chlorination --
Opportunities of pseudoboehmite processing from aluminum content raw material at sintering method --
Chemical Alumina Preparation by Using High Alumina Content Fly Ash --
A Novel Process of Alumina Production from Low-grade Bauxite Containing Sulfur --
Iron separation from bauxite through smelting-reduction process --
Thermodynamic behavior of lime desulfurization in sodium aluminate solution --
Part 4: Alumina & Bauxite: Poster Session --
A study on optimization of processing parameters for synthesis of calcium hydroaluminosulfate using response surface methodology --
Part 5: Aluminum Alloys, Processing and Characterization: Alloy Development and Applications --
Design of New 6xxx Series Al Alloy Using the CALPHAD Thermodynamic Database --
Study of an Al-Ca Alloy with Low Young's Modulus --
Production Of 3004 Aluminum Alloy Sheet For Structural Applications From Twin Roll Casting --
Aluminum alloys with tailored TiB2 particles for composite applications --
Development of low expansion and high strength aluminium hybrid composite --
Part 6: Aluminum Alloys, Processing and Characterization: Solidification and Casting --
A model for a-Al(Mn,Fe)Si crystals --
Casting Characteristics of High Cerium Content Aluminum Alloys --
In-situ observation of fragmentation of primary crystals by ultrasonic cavitation in water --
The enhancement of mechanical properties of A356 alloy solidified at lower cooling rate via effectively grain refinement --
Secondary Aluminum Alloys Processed by Semisolid Process for Automotive Application --
Integrated casting-extrusion of an AA6082 aluminum alloy --
On Porosity Formation in Al-Si-Cu Cast Alloys --
Part 7: Aluminum Alloys, Processing and Characterization: Characterization --
Algorithm for Finding the Correlation between the Properties of Wrought Aluminum Alloys, the Chemical Composition and the Processing Parameters --
Analysis of an aluminium alloy containing trace elements --
Determination of aluminum oxide thickness on the annealed surface of 8000 series aluminum Foil by Fourier Transform Infrared Spectroscopy --
Test Uncertainty in Chemical Composition Analysis --
Real Time 3D Imaging and Laser Marking System for Industrial Traceability --
Production and Certification of Arconic Certified Reference Materials --
Characterization of Large Strain Extrusion Machining (LSEM) of AA7050 --
Interaction between fatigue micro-cracks and inclusion/matrix interface in high-strength Al alloy --
Influence of trace element additions on Fe bearing intermetallic solidification of a 6063 Al alloy --
Part 8: Aluminum Alloys, Processing and Characterization: Heat Treatment --
THE OPTIMIZATION OF THE HOMOGENIZATION TREATMENT OF AA7075 --
Precipitation modeling and validation of Al-5%Cu-0.4%Mn alloy using quench factor analysis --
Young’s modulus of Al-Si-Mg-Cu based alloys under different heat treatment processes --
Intergranular Corrosion Investigation on EN-AW 6082 Redraw Rod --
The influence of process parameters and thermomechanical history on streaking defects in AA6060 extrusions --
Effect of Heat-treatment on Microstructure and Mechanical Properties of Sonicated Multicomponent AlMgSiCuZn Alloy --
Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys --
Part 9: Aluminum Alloys, Processing and Characterization: Plasticity and Mechanical Behavior --
New Yield Criterion for Description of Plastic Deformation of Face-Centered Cubic Single Crystals --
Quantifying As-cast and Homogenized AA7050 Mechanical Properties through Compression Testing --
Determining a Stable Texture Condition Under Complex Strain Path Deformations in Face Centered Cubic Metals --
Microstructural transition and elevated temperature tensile properties of modified Al-Si-Cu-Mg alloys --
Effects of alloying elements on anneal-hardening behavior of aluminum alloy foils --
Increasing strength and corrosion resistance of AlMgSi alloys by tailor-made thermomechanical processing --
Microstructural optimization of a High Mechanical Properties (HMP) aluminum alloy by using CobaPress™ process --
Cyclic Stress-strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy --
Part 10: Aluminum Alloys, Processing and Characterization: Poster Session --
Corrosion of Al-Mg Alloys in Ethanol --
Warm pressing of Al powders: an alternative consolidation approach --
Part 11: Aluminum Reduction Technology: Dry Scrubbing, Alumina Transport and Dissolution --
Spreading of Alumina and Raft Formation on the Surface of Molten Cryolite --
Fluoride Capture Capacity of SGA: The Interplay between Particle and Pore Size Distribution --
Predictive Formulae for the Competitive Adsorption of HF and SO2 on Smeltergrade Alumina Used in Dry Scrubbing Applications --
Pot Gas Treatment at High Gas Temperatures --
Influence of Handling Parameter on Powder Properties --
Part 12: Aluminum Reduction Technology: Anode Effect and PFC Emissions --
Preventive Treatment of Anode Effects Using On-Line Individual Anode Current Monitoring --
Reduction in EGA Jebel Ali Potroom GHG Emissions --
Partial Anode Effect in a Two-Compartment Laboratory Alumina Reduction Cell --
Co-evolution of Carbon Oxides and Fluorides during the Electrowinning of Aluminium with Molten NaF-AlF3-CaF2-Al2O3 Electrolytes --
Part 13: Aluminum Reduction Technology: Cell Lining Materials --
Chemical stability of thermal insulating materials in sodium vapour environment --
AGING OF INSULATING LININGS IN ALUMINIUM ELECTROLYSIS CELLS --
Cathode Wear Based on Autopsy of a Shut down Aluminium Electrolysis Cell --
SPL Recycling and Re-Processing --
Alternative applications of SPL: Testing ideas through experiments and mathematical modeling --
Part 14: Aluminum Reduction Technology: Cell Voltage and Pot Control --
Clustering Aluminium Reduction Cells --
Application of Multivariate Statistical Process Control with STARprobeTM Measurements in Aluminium Electrolysis Cells --
Study Of Impact Of The Anode Slots On The Voltage Fluctuations Of Aluminium Electrolysis Cell Using Bubble Layer Simulator --
Detecting, Identifying and Managing Systematic Potline Issues with Generation 3 Process Control --
Predicting Instability and Current Efficiency of Industrial Cells --
Part 14: Aluminum Reduction Technology: Electrolyte and Fundamentals --
Sodium in Aluminium as a Cell Performance Indicator: A Quantitative Framework --
Bauxite processing via chloride route to produce chloride products and subsequent electrolysis of aluminium chloride to produce aluminium metal --
Stability of Chlorides in Cryolitic Electrolyte --
Role of Heat Transfer in the Formation of Carbon Oxides in Smelting Cells --
Part 15: Aluminum Reduction Technology: Modelling and Cell Design --
Improving The Understanding Of BUSBAR Design And Cell MHD Performance --
LES turbulence modeling approach for molten aluminium and electrolyte flow in aluminum electrolysis cell --
MHD of Large Scale Liquid Metal Batteries --
Low energy consumption cell designs involving copper inserts and an innovative busbar network layout --
Minimizing Cathode Voltage Drop by Optimizing Cathode Slot Design --
Part 16: Aluminum Reduction Technology: Potroom Operations --
Crane Electrical Isulation Monitoring in Potlines: New CANDI 4.0 Development --
Surviving an Extended Power Outage after a Break Down in the Sub Station --
Retrofit of Damaged Corner Risers by Means of Bolted Connections --
Theory and Practice of High Temperature Gas Baking Technology for Alumninium Electrolysis Cells --
Part 17: Aluminum Reduction Technology: Technology Development --
IMPLEMENTATION OF D18+ CELL TECHNOLOGY AT EGA JEBEL ALI SMELTER --
Integrating a New Smelter Supervision HMI in Existing Control Systems at ALBRAS --
DX+ ULTRA – EGA HIGH PRODUCTIVITY, LOW ENERGY CELL TECHNOLOGY --
Potroom HF Emission Reduction by Anode Inert Tray Technology Performances of ALRO Industrial 1st of Class --
Enabling efficient heat recovery from aluminium pot gas --
The Successful Implementation of AP40 Technology at Kitimat --
Part 18: Cast Shop Technology: Continuous Strip Casting --
Effect of grain refiners on aluminum twin roll casting process --
Influence of Process Conditions on Segregation Behavior in Twin-Roll Casting of an AlFeSi alloy --
Effect of Magnesium Content on Microstructure and Mechanical Properties of Twin-Roll Cast Aluminum Alloys --
Influence of sticking on the roll topography at twin-roll casting of aluminum alloys --
Material Surface Roughness Change in Twin Roll Cas.
Рубрики: Metals.
   Materials science.
   Engineering—Materials.
   Metallic Materials.
   Characterization and Evaluation of Materials.
   Materials Engineering.
Анотація: .

Перейти: https://doi.org/10.1007/978-3-319-51541-0

Дод.точки доступу:
Ratvik, Arne P. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
12.


   
    Charge-Trapping Non-Volatile Memories [[electronic resource] :] : volume 2--Emerging Materials and Structures / / ed. Dimitrakis, Panagiotis. - 1st ed. 2017. - [S. l. : s. n.]. - V, 211 p. 170 illus., 117 illus. in color. - Б. ц.
    Зміст:
Materials and Device Reliability in SONOS Memories --
Charge-Trap-Non-Volatile Memory and Focus on Flexible Flash Memory Devices --
Hybrid Memories Based on Redox Molecules --
Organic Floating-Gate Memory Structures --
Nanoparticles Based Flash-like Non Volatile Memories: Cluster Beam Synthesis of Metallic Nanoparticles and Challenges for the Overlying Control Oxide Layer.
Рубрики: Nanotechnology.
   Electronic circuits.
   Electronics.
   Microelectronics.
   Computer memory systems.
   Engineering—Materials.
   Nanotechnology.
   Electronic Circuits and Devices.
   Electronics and Microelectronics, Instrumentation.
   Memory Structures.
   Materials Engineering.
Анотація: This book describes the technology of charge-trapping non-volatile memories and their uses. The authors explain the device physics of each device architecture and provide a concrete description of the materials involved and the fundamental properties of the technology. Modern material properties, used as charge-trapping layers, for new applications are introduced. Provides a comprehensive overview of the technology for charge-trapping non-volatile memories; Details new architectures and current modeling concepts for non-volatile memory devices; Focuses on conduction through multi-layer gate dielectrics stacks.

Перейти: https://doi.org/10.1007/978-3-319-48705-2

Дод.точки доступу:
Dimitrakis, Panagiotis. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
13.


   
    Phosphors, Up Conversion Nano Particles, Quantum Dots and Their Applications [[electronic resource] :] : volume 1 / / ed. Liu, Ru-Shi. - 1st ed. 2017. - [S. l. : s. n.]. - VIII, 593 p. 377 illus., 257 illus. in color. - Б. ц.
    Зміст:
Introduction to the basic properties of luminescent materials --
Phosphors for White-light LEDs through Principle of Energy Transfer --
Energy Transfer Between Luminescent Centers --
Principles of Energetic Structure and Excitation Energy Transfer Based on High Pressure Measurements --
First-principles calculations of structural, elastic, electronic and optical properties of pure and Tm2+-doped alkali-earth chlorides MCl2 (M=Ca, Sr and Ba) --
First-principles calculation of luminescent materials --
Color Tuning of Oxide Phosphors --
Oxide Phosphors --
Categories of Oxide Phosphors --
Crystal structures and Luminescence properties of oxyhalide-based phosphors --
Tuning of luminescence by varying the O/N or Al/Si ratio in some Eu-doped nitride phosphors --
Characteristics and properties of A(I,II)M(IV)F6 fluoride phosphors --
Novel Phosphors for UVLEDs --
Bismuth doped photonic materials: are they promising phosphors for WLEDs? --
Design of single-phased multicolor-emission phosphor for LED --
Crystal Structure and Luminescence Properties of Some Fluorides, (Oxy)nitrides and Oxides Phosphors.
Рубрики: Inorganic chemistry.
   Engineering—Materials.
   Nanotechnology.
   Inorganic Chemistry.
   Materials Engineering.
   Nanotechnology.
Анотація: This book introduces readers to fundamental information on phosphor and quantum dots. It comprehensively reviews the latest research advances in and applications of fluoride phosphors, oxide phosphors, nitridosilicate phosphors and various quantum dot materials. Phosphors and phosphor-based quantum dot materials have recently gained considerable scientific interest due to their wide range of applications in lighting, displays, medical and telecommunication technologies. This work will be of great interest to researchers and graduate students in materials sciences and chemistry who wish to learn more about the principles, synthesis and analysis of phosphors and quantum dot materials.

Перейти: https://doi.org/10.1007/978-3-662-52771-9

Дод.точки доступу:
Liu, Ru-Shi. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
14.


    Plascencia, Gabriel.
    Basic Thermochemistry in Materials Processing [[electronic resource] /] : монография / Gabriel. Plascencia, Jaramillo, David. ; . - 1st ed. 2017. - [S. l. : s. n.]. - X, 196 p. 82 illus. - Б. ц.
    Зміст:
Laws of thermodynamics & auxiliary functions --
Phase equilibria I --
Electrochemistry --
Mixing and solution thermodynamics --
Phase equilibria II --
Exergy.
Рубрики: Metals.
   Engineering—Materials.
   Thermodynamics.
   Heat engineering.
   Heat transfer.
   Mass transfer.
   Physical chemistry.
   Metallic Materials.
   Materials Engineering.
   Engineering Thermodynamics, Heat and Mass Transfer.
   Physical Chemistry.
Анотація: This book provides the reader with some thermochemistry notes. The intention is to provide a simple, easy to understand text which serves as a complimentary material to more complex books. It also provide students and those beginning in the field with several application examples used in different areas of materials processing. The book presents fully solved problems, some quite often found in major metallurgical operations.

Перейти: https://doi.org/10.1007/978-3-319-53815-0

Дод.точки доступу:
Jaramillo, David.; Plascencia, Gabriel. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
15.


    Lahiri, Amiya Kumar.
    Applied Metallurgy and Corrosion Control [[electronic resource] :] : a Handbook for the Petrochemical Industry / / Amiya Kumar. Lahiri ; . - 1st ed. 2017. - [S. l. : s. n.]. - XXIII, 544 p. 260 illus. - Б. ц.
    Зміст:
Chapter 1: Introduction --
Chapter 2: Classification of Metallic Engineering Materials --
Chapter 3: Production and Working of Metals and Alloys --
Chapter 4: Structure of Metals and Alloys --
Chapter 5: Mechanical Behaviour of Metals and Alloys --
Chapter 6: Heat Treatment --
Chapter 7: Metallurgical Aspects of Welding --
Chapter 8: Material Degradation --
Chapter 9: Material Selection and Performance in Oil and Gas Industry --
Chapter 10: Material Selection and Performance in Refining Industry --
Chapter 11: Material Selection and Performance in Fertilizer Industry --
Chapter 12: Damage Assessment and Repair of Stationary Equipment --
Chapter 13: Failure Analysis .
Рубрики: Metals.
   Tribology.
   Corrosion and anti-corrosives.
   Coatings.
   Engineering—Materials.
   Metallic Materials.
   Tribology, Corrosion and Coatings.
   Materials Engineering.
Анотація: This book serves as a comprehensive resource on metals and materials selection for the petrochemical industrial sector. The petrochemical industry involves large scale investments, and to maintain profitability the plants are to be operated with minimum downtime and failure of equipment, which can also cause safety hazards. To achieve this objective proper selection of materials, corrosion control, and good engineering practices must be followed in both the design and the operation of plants. Engineers and professional of different disciplines involved in these activities are required to have some basic understanding of metallurgy and corrosion. This book is written with the objective of servings as a one-stop shop for these engineering professionals. The book first covers different metallic materials and their properties, metal forming processes, welding, and corrosion and corrosion control measures. This is followed by considerations in material selection and corrosion control in three major industrial sectors, oil & gas production, oil refinery, and fertilizers. The importance of pressure vessel codes as well as inspection and maintenance repair practices have also been highlighted. The book will be useful for technicians and entry level engineers in these industrial sectors. Additionally, the book may also be used as primary or secondary reading for graduate and professional coursework. .

Перейти: https://doi.org/10.1007/978-981-10-4684-1

Дод.точки доступу:
Lahiri, Amiya Kumar. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
16.


    Biner, S. Bulent.
    Programming Phase-Field Modeling [[electronic resource] /] : монография / S. Bulent. Biner ; . - 1st ed. 2017. - [S. l. : s. n.]. - XVI, 400 p. 73 illus., 69 illus. in color. - Б. ц.
    Зміст:
An overview of the Phase-Field Method and Its Formulism --
Introduction to numerical solution of Partial Differential Equations --
Preliminaries about the codes --
Solving Phase-Field models with finite difference algorithm --
Solving phase-field model with Fourier spectral methods --
Solving phase-field equations with finite element method --
Phase-field crystal modeling of material behavior --
Concluding remarks.
Рубрики: Materials science.
   Engineering—Materials.
   Applied mathematics.
   Engineering mathematics.
   Physics.
   Microbiology.
   Characterization and Evaluation of Materials.
   Materials Engineering.
   Mathematical and Computational Engineering.
   Numerical and Computational Physics, Simulation.
   Microbiology.
Анотація: This textbook provides a fast-track pathway to numerical implementation of phase-field modeling—a relatively new paradigm that has become the method of choice for modeling and simulation of microstructure evolution in materials. It serves as a cookbook for the phase-field method by presenting a collection of codes that act as foundations and templates for developing other models with more complexity. Programming Phase-Field Modeling uses the Matlab/Octave programming package, simpler and more compact than other high-level programming languages, providing ease of use to the widest audience. Particular attention is devoted to the computational efficiency and clarity during development of the codes, which allows the reader to easily make the connection between the mathematical formulism and the numerical implementation of phase-field models. The background materials provided in each case study also provide a forum for undergraduate level modeling-simulations courses as part of their curriculum. Emphasizes the numerical aspects of phase-field modeling; Explains both the underlying physics and formulism of phase-field modeling; Reinforces reader understanding with a collection of algorithms; Adopts a cross-disciplinary approach to PFM relevant to students of engineering, physics, biology, and other disciplines concerned with microstructure evolution and solutions to interfacial problems; Includes all necessary source code, downloadable from the publisher.

Перейти: https://doi.org/10.1007/978-3-319-41196-5

Дод.точки доступу:
Biner, S. Bulent. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
17.


   
    Composite Materials [[electronic resource] :] : processing, Applications, Characterizations / / ed. Kar, Kamal K. - 1st ed. 2017. - [S. l. : s. n.]. - XVII, 686 p. 382 illus., 135 illus. in color. - Б. ц.
    Зміст:
Selected Topics on Composite Materials: Recent Developments --
Polymer Based Composite Structures: Processing and Applications --
Polymer Based Composite Materials: Characterizations --
Newly Developed Rubber Pressure Molding Technique for Fabrication of Composites --
Functionally Graded Composites: Processing and Applications --
Nano Micro Composites by Electrodeposition --
Short Carbon Fiber Reinforced Polycarbonate Composites --
Ionic Polymer Metal Composites --
Nanocomposites Based on Carbon Nanomaterials and Electronically Nonconducting Polymers --
Syntactic Foams For Multifunctional Applications --
Advanced Carbon-Carbon Composites: Processing Properties and Applications --
Metal Matrix Composites: Theory, Techniques and Applications --
Functionally Graded Styrene Butadiene Rubber Composites with Gradation of Magnetic Properties --
Mechanical, Electrical and Tribological Properties of Copper-Graphite Composites --
Current Advancements in Ceramic Matrix Composites --
Advanced ZrO2-based Ceramic Nanocomposites for Optical and other Engineering Applications --
xAgI-(1-x)MPO3 [M=Ag, Li) Superionic Composite Glasses and Their Current Issues --
Carbon Nanotube/Graphene Reinforced Ceramic Composites --
Bamboo Fiber Based Polymer Composites --
Superhydrophobic and Superoleophobic Surfaces.
Рубрики: Materials science.
   Engineering—Materials.
   Materials Science, general.
   Materials Engineering.
Анотація: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.

Перейти: https://doi.org/10.1007/978-3-662-49514-8

Дод.точки доступу:
Kar, Kamal K. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
18.


   
    Deformation and Fracture Behaviour of Polymer Materials [[electronic resource] /] : монография / ed.: Grellmann, Wolfgang., Langer, Beate. - 1st ed. 2017. - [S. l. : s. n.]. - XXXII, 533 p. 328 illus., 219 illus. in color. - Б. ц.
    Зміст:
Modern Aspects of Fracture Mechanics in the Industrial Application of Polymers --
Advanced Structure-Sensitive Methods for Analyzing Cracks and Fracture Surfaces --
Fracture Mechanics and Related Methods for Analyzing the Fracture Safety and Lifetime of Plastic Pipe Materials --
Deformation Behavior and Fracture Mechanics Characteristics of Polymer Films and Adhesive Systems --
Fatigue Crack Propagation, Lifetime and Long-term Mechanical Behavior of Thermoplastics and Elastomers --
Influence of Aging on Mechanical and Fracture Mechanics Performance of Thermoplastics and Elastomers --
Mechanical Properties and Fracture of Elastomers – Influence of Composition, Reinforcement and Crosslinking --
Rolling Resistance, Friction and Wear of Elastomeric Components.
Рубрики: Structural materials.
   Polymers  .
   Engineering—Materials.
   Materials science.
   Chemical engineering.
   Structural Materials.
   Polymer Sciences.
   Materials Engineering.
   Characterization and Evaluation of Materials.
   Industrial Chemistry/Chemical Engineering.
Анотація: This book covers the most recent advances in the deformation and fracture behaviour of polymer material. It provides deeper insight into related morphology–property correlations of thermoplastics, elastomers and polymer resins. Each chapter of this book gives a comprehensive review of state-of-the-art methods of materials testing and diagnostics, tailored for plastic pipes, films and adhesive systems as well as elastomeric components and others. The investigation of deformation and fracture behaviour using the experimental methods of fracture mechanics has been the subject of intense research during the last decade. In a systematic manner, modern aspects of fracture mechanics in the industrial application of polymers for bridging basic research and industrial development are illustrated by multifarious examples of innovative materials usage. This book will be of value to scientists, engineers and in polymer materials science.

Перейти: https://doi.org/10.1007/978-3-319-41879-7

Дод.точки доступу:
Grellmann, Wolfgang. \ed.\; Langer, Beate. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
19.


   
    TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings [[electronic resource] /] : монография / ed. TMS, The Minerals, Metals & Materials Society. - 1st ed. 2017. - [S. l. : s. n.]. - XIII, 818 p. 488 illus. - Б. ц.
    Зміст:
Part 1: 2017 Symposium on Functional Nanomaterials: Emerging Nanomaterials and Nanotechnology --
High-performance Supercapacitors Based on Hierarchical VOx Microspheres Forming from Hyperbranched Nanoribbons --
Potential of Magnetotactic Bacteria for the Fabrication of Iron Nanoparticles --
Facile Green Synthesis and Characterization of Water-soluble Superparamagnetic Iron Oxide Nanoparticles-gold Porphyrin Conjugate for Improved Photodynamic Therapy --
Synthesis of AgNP’s from Industrial Wastes --
Synthesis of Mn2O3 Nanopowders with Urea and Citric Acid by Solution Combustion Route --
Part 2: Additive Manufacturing of Metals: Establishing Location-Specific Processing-Microstructure-Property Relationships --
Evolution of Aluminum Alloys Structure at Production Phases of 3D Products by Methods of Additive Technologies --
Characterization of Multiperforated Plates Manufactured by SLM and EBM for Aeroengine Applications --
Direct Laser Metal Deposition of Eutectic Al-Si Alloy for Automotive Applications --
Additive Manufacturing to Produce Standard and Custom Alloy Titanium --
Aiming for Modeling-assisted Tailored Designs for Additive Manufacturing --
Part 3: Additive Manufacturing: Building the Pathway towards Process and Material Qualification --
The Use of Laser Ultrasound to Detect Defects in Laser Melted Parts --
SLM Process Variables and Part Geometry Optimization Based on Numerical Prediction of Process Induced Distortions --
Optimizing, Fabricating and Characterizing Additively Manufactured Process Tubing --
Scaling Relationships for Direct Ink Writing with Acoustic Focusing --
The Influence of Gas Cooling in Context of Wire Arc Additive Manufacturing: A Novel Strategy of Affecting Grain Structure and Size --
Microstructure and Mechanical Properties of Laser Deposited Ni/WC Metal Matrix Composite Coatings --
Composite Powder Consolidation Using Selective Laser Melting: Input Energy/Porosity Morphology/Balling Effect Relation --
Part 4: Advanced Characterization Techniques for Quantifying and Modeling Deformation Mechanisms --
Strain Localization Structures in Textured Magnesium AZ31 under Reversed Loading via Multi-scale Digital Image Correlation --
Deformation and Strengthening Mechanisms in AISI 321 Austenitic Stainless Steel under both Dynamic and Quasi-static Loading Conditions --
Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths --
Microstructural Characterization of Inconel 600 Tubes after Tensile Tests at Various Temperatures and Strain Rates --
Part 5: Advanced High-Strength Steels --
Influences of Thermomechanical Treatments on the Microstructure Evolution and Mechanical Properties of Nano-precipitates Strengthened Steels --
Effects of Solid Solution Treatment on the Microstructure and Mechanical Properties in the Ultra-high Strength Steel Strengthened by Nanoscale Particles --
Effects of Microstructure on the Strain Rate Sensitivity of Advanced Steels --
Part 6: Advanced Materials in Dental and Orthopedic Applications --
Characterization of Chitin Synthesized from Snail Shell --
Titanium-magnesium Composite for Dental Implants (BIACOM) --
Part 7: Alloys and Compounds for Thermoelectric and Solar Cell Applications V --
Thermoelectric Behaviour of Polyvinyl Acetate /CNT Composites --
Part 8: Applications of Solidification Fundamentals --
Microstructure Characteristics of A356 Nanocomposites Manufactured Via Ultrasonic Cavitation Processing under Controlled Solidification Conditions --
Part 9: Biological Materials Science --
Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants --
Osteoporosis and fatigue fracture prevention by analysis of bone microdamage --
Bone Remodeling under Tooth Loading --
Investigating Biochemical Constituents of Cymbopogon citratus Leaf: Prospects on Total Corrosion of Concrete Steel-rebar in Acidic-Sulphate Medium --
Two-step sintering effects on the microstructure and mechanical properties of forsterite scaffolds --
Part 10: Bulk Metallic Glasses XIV --
Material Behavior in Micro Milling of Zirconium based Bulk Metallic Glass --
Part 11: Computational Thermodynamics and Kinetics --
Comparison of the Phase-field Models to Predict the Recrystallization Kinetics --
Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments --
Atomic Scale Modeling of Fe-Al-Mn-C Alloy using Pair Models and Monte-Carlo Calculations --
Control Technique Study of Non-metallic Inclusions in Low Carbon Steel by Rare Earth Final Deoxidization --
Effect of Cooling Rate on Phase Transformation and Microstructure Evolution in a Large Size Forged Ingot of Medium Carbon Low Alloy Steel --
Formation and Control of CaS Inclusion in Gear Steel 20MnCr5 --
Investigations on the Mechanical Deformation of Amorphous Alloy Nanowires Using Phase-field Modeling and Thermodynamics Avalanche Models --
Thermodynamic Modeling of Al-Fe-Cr Ternary System --
Part 12: Defects and Properties of Cast Metals --
A Modeling and Experimental Investigation on the Formation of Acicular Silicon and Sludge in High Pressure Die Casting of a Modified A383 Alloy --
Hot-tearing of Multicomponent Al-Cu Alloys Based on Casting Load Measurements in a Constrained Permanent Mold --
Effect of Molybdenum Content, Pouring Temperature and Cooling Rate on the Casting Defects of High Chromium White Cast Iron --
Effect of Various Aluminum Content on the Formation of Inclusion --
Effect of Segregated Alloying Elements on the High Strength Steel Properties: Application to the Large Size Ingot Casting Simulation --
Thermal-Mechanical Model of Depression Formation in Steel Continuous Casting --
Study for the Initiation Locations of Longitudinal Surface Cracks on Beam Blank in the Mold of Continuous Casting --
The Influence of SEN and Upper Nozzle Design on the Flow Character for the Slab Quality --
Effect of the Addition of Ce and Si on the Hot Cracking Behavior of SiMn Alloy during the Solidification Process --
Modeling and Predication of Shrinkage Porosity Formation in Steel Ingot --
Numerical Analysis of Coupled Turbulent Flow and Macroscopic Solidification in a Billet Continuous Casting Mold with Electromagnetic Stirring --
Part 13: Environmentally Assisted Cracking: Theory and Practice --
Hydrogen embrittlement and hydrogen-enhanced strain-induced vacancies in a-iron --
Factors causing hydrogen embrittlement of cold-drawn pearlitic steel fractured under elastic/plastic region --
Corrosion of Nickel-Titanium, C110, and Al6061 in Gallium-based Liquid Metal Alloys --
Part 14: General Poster Session --
Synthesis and characterization of Al–B4C powders by mechanical alloying --
Direct Conversion of Celestite to SrCO3 by Wet Milling --
Part 15: High Temperature Electrochemistry III --
Electrochemistry in Molten LiF-BeF2 Salt for Fluoride Salt-Cooled High Temperature Reactor Applications --
Impurity Removal from Titanium Oxycarbide --
Next-Generation Molten Oxide Energy Materials R&D --
Effects of Oxide Precursor Preparation Parameters on the Electrochemical Reduction of Tantalum Pentoxide in Calcium Chloride Melt --
The Effect of Temperature on Electrochemical Codeposition of Mg-Ni Hydrogen Storage Alloys from Molten Salt System --
Part 16: Materials and Fuels for the Current and Advanced Nuclear Reactors VI --
Diffusion Studies in the Development of an FCCI Barrier for High-Burnup Metallic Nuclear Fuel --
Part 17: Materials Engineering of Soft Magnets for Power and Energy Applications --
Development of Mold Inductor for Power Conversion System --
Effect of Annealing Time on the Texture of a 2.8% Si Non-Oriented Electrical Steel after Inclined and Skew Rolling --
Multi-parameter Magnetic Material Characterization for High Power Medium Frequency Converters --
Part 18: Phase Transformations and Microstructural Evolution --
An Experimental Assessment of the a +a’ Miscibility Gap in Fe-Cr --
Phase Transformation, Microstructural Evolution and Property Modification in Rapidly Solidified Grey Cast Iron --
Morphology of Order-disorder Structures in Rapidly Solidified L12intermetallics --
Part 19: Recent Developments in Biological, Structural and Functional Thin Films and Coatings --
Development of Enamel Coatings in Accordance with Recent Regulations of Food Contact Materials --
Transmission Probability of Diffusing Particles – A Case Study --
Preparation of Porous Titanium Oxide Film by Sol-Gel Method --
Part 20: Solid State Precipitation --
Hydride Precipitates in Zirconium Alloys: Evolution of Dissolution and Precipitation Temperatures during Thermal Cycling Correlated to Microstructure Features --
Analysis of Beta? Cu4Ti Precipitation in Cu-Ti Alloys by Conventional and Diffusion-couple Methods --
Carbide Precipitation in a Low-alloy Ferritic Steel --
Part 21: Student-Run Symposium: Building Bridges – Connecting Academic and Industry Research --
Fundamental Principles for a Successful Collaboration between University and Metalworking Industries.
Рубрики: Metals.
   Materials science.
   Engineering—Materials.
   Metallic Materials.
   Characterization and Evaluation of Materials.
   Materials Engineering.
Анотація: This collection features papers presented at the 146th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.

Перейти: https://doi.org/10.1007/978-3-319-51493-2

Дод.точки доступу:
TMS, The Minerals, Metals & Materials Society. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
20.


    Bontempi, Elza.
    Raw Materials Substitution Sustainability [[electronic resource] /] : монография / Elza. Bontempi ; . - 1st ed. 2017. - [S. l. : s. n.]. - IX, 101 p. 43 illus., 41 illus. in color. - Б. ц.
    Зміст:
Raw materials and sustainable indicators --
Case study in industrial processes: calcite and talc substitution in plastic composites --
Case study in agriculture: commercial phosphate fertilizers substitution --
The new approach to evaluate the sustainability of raw materials substitution.
Рубрики: Materials science.
   Engineering—Materials.
   Industrial management—Environmental aspects.
   Natural resources.
   Characterization and Evaluation of Materials.
   Materials Engineering.
   Sustainability Management.
   Natural Resource and Energy Economics.
Анотація: This book is the first to propose a simplified quantitative approach to evaluating raw materials’ substitution sustainability, which takes into account their embodied energy and CO2 footprint. In addition to the new quantitative model, it also presents qualitative concepts as well as a number of case studies, and includes helpful illustrations to explain the concept and approach. Europe has launched several initiatives to promote research and innovation in raw materials and to find candidates for natural resources substitution. However, while there is a tremendous interest in raw material substitution, the lack of a simplified approach to comparing the materials’ sustainability and effective legal frameworks make final market applications extremely challenging. The market for new raw materials can only be established if industrial sectors are appropriately sensitized and stimulated. Addressing these and other issues, the book offers a valuable resource not only for scientists, researchers, and politicians, but also for industrial and business operators looking for a way to evaluate raw materials’ substitution sustainability.

Перейти: https://doi.org/10.1007/978-3-319-60831-0

Дод.точки доступу:
Bontempi, Elza. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
 1-20    21-40   41-48 
 
Стандартний
Розширений
Професійний
Розподілений
За словником
УДК-навігатор
Тематичний навігатор
© Міжнародна Асоціація користувачів і розробників електронних бібліотек і нових інформаційних технологій
(Асоціація ЕБНІТ)