Головна Спрощенний режим Опис Шлюз Z39.50
Авторизація
Прізвище
Пароль
 

Бази даних


Доступ до повнотекстових книг Springer Nature (через IP-адреси БДМУ) - результати пошуку

Вид пошуку
К Н И Г И
Періодичні видання
Дисертації та автореферати
Фонд рідкісних видань
Електронна Навчальна література
Публікації засновників кафедр БДМУ
Нововведення у сфері охорони здоров'я
Календар пам'ятних дат
Доступ до повнотекстових книг Springer Nature (через IP-адреси БДМУ)
Зона пошуку
у знайденому
Формат представлення знайдених документів:
повнийінформаційнийкороткий
Відсортувати знайдені документи за:
авторомназвоюроком виданнятипом документа
Пошуковий запит: (<.>S=Characterization and Evaluation of Materials.<.>)
Загальна кiлькiсть документiв : 103
Показанi документи с 1 за 20
 1-20    21-40   41-60   61-80   81-100   101-103 
1.


    Stoica, Mihai.
    Fe-Based Bulk Metallic Glasses [[electronic resource] :] : understanding the Influence of Impurities on Glass Formation / / Mihai. Stoica ; . - 1st ed. 2017. - [S. l. : s. n.]. - XVII, 126 p. 69 illus., 10 illus. in color. - Б. ц.
    Зміст:
Theoretical aspects, Experimental Details and Particularities --
[(Fe0.5Co0.5)0.75B0.2Si<0.05]96Nb4 Alloy --
A New Model Alloy: Fe74Mo4P10C7.5B2.5Si2 --
Developing New Bulk Metallic Glasses Starting from Fe77.5P12.5C10 Composition.
Рубрики: Metals.
   Phase transitions (Statistical physics).
   Materials science.
   Metallic Materials.
   Phase Transitions and Multiphase Systems.
   Characterization and Evaluation of Materials.
Анотація: Mihai Stoica investigates in details the glass formation of two model alloys, [(Fe0.5Co0.5)0.75B0.2Si0.05]96Nb4 and Fe74Mo4P10C7.5B2.5Si2. More than 20 master alloys using different raw materials were prepared. Besides the typical calorimetry and X-Ray diffraction, magnetic measurements were employed to analyze the amorphicity degree of the sample. Two new bulk metallic glass-forming alloy compositions are designed and possible preparation routes are proposed. Contents Theoretical aspects, Experimental Details and Particularities [(Fe0.5Co0.5)0.75B0.2Si0.05]96Nb4 Alloy A New Model Alloy: Fe74Mo4P10C7.5B2.5Si2 Developing New Bulk Metallic Glasses Starting from Fe77.5P12.5C10 Composition Target Groups Scientists and students in the field of material sciences, physics and engineering Practitioners in the industrial field of material sciences About the Author Dr. Mihai Stoica is a Scientist in the group of Metal Physics and Technology, ETH Zurich, Switzerland. Former leader of the “Solidification Processes and Complex Structures” group at the Leibniz Institute for Solid State and Materials Research Dresden, Germany, M. Stoica holds a PhD Degree in Physics. His scientific interests are focused on preparation and characterization of bulk metallic glasses, as well as on their mechanical and magnetic properties. Since October 2013 he is Visiting Associate Professor at Politehnica University Timisoara, Romania, where he accomplished the Habilitation in Materials Engineering in October 2015.

Перейти: https://doi.org/10.1007/978-3-658-17018-9

Дод.точки доступу:
Stoica, Mihai. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
2.


   
    Wood is Good [[electronic resource] :] : current Trends and Future Prospects in Wood Utilization / / ed. Pandey, Krishna K. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XIV, 480 p. 126 illus. - Б. ц.
    Зміст:
Section A: Wood Properties and Variability --
Section B: Wood Protection --
Section C: Wood-based Composites --
Section D: Wood Utilization Pattern --
Section E: Wood and Climate Change.
Рубрики: Forest products.
   Materials science.
   Light construction.
   Steel construction.
   Lightweight construction.
   Wood Science & Technology.
   Characterization and Evaluation of Materials.
   Light Construction, Steel Construction, Timber Construction.
Анотація: This book is a compilation of selected papers presented in the International Conference on the theme ‘Wood is Good: Current Trends and Future Prospects in Wood’. The contents of the book deal with recent innovations, trends and challenges in wood science and are grouped in five distinct sections. They cover a wide range of topics like wood variability, processing and utilization, wood protection, wood-based composites, wood energy and the role of wood in mitigating climate change. With the ever increasing human population and growing demand for wood, this book offers valuable insights for better understanding and efficient utilization of this wonderful gift of nature. This book will be useful to researchers, professionals, and policy makers involved in forestry and wood related areas.

Перейти: https://doi.org/10.1007/978-981-10-3115-1

Дод.точки доступу:
Pandey, Krishna K. \ed.\; Ramakantha, V. \ed.\; Chauhan, Shakti S. \ed.\; Arun Kumar, A.N. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
3.


   
    The Structural Integrity of Carbon Fiber Composites [[electronic resource] :] : fifty Years of Progress and Achievement of the Science, Development, and Applications / / ed.: Beaumont, Peter W. R., Soutis, Constantinos., Hodzic, Alma. - 1st ed. 2017. - [S. l. : s. n.]. - XIV, 969 p. 605 illus., 353 illus. in color. - Б. ц.
    Зміст:
Part I --
1 50 years of carbon fibre 60 years in composite materials --
2 But how can we make something useful out of black string?" The development of carbon fibre composites manufacturing 1965-2015 --
3 Boron Fiber to Carbon Fiber --
4 Serendipity in Carbon Fibres Interfaces and Interphases in Composites --
Part II --
Nano-engineered hierarchical carbon fibres and their composites preparation, properties, and multi-functionalities --
5 Nano-engineered carbon fibre reinforced composites challenges and opportunities --
6 A Nano-Micro-Macro Multi-Scale Model for Progressive Failure Prediction in Advanced Composites --
7 Carbon fibre reinforced polymer laminates with nanofiller enhanced multi-functionality --
8 Analysis models for polymer composites across different length scales --
9 Analysis models for polymer composites across different length scales --
Part III --
10 Microscale characterization techniques of Fibre Reinforced Polymers --
11 Fibre Distribution and the Process Property Dilemma --
12 Analysis of defect developments in composite forming --
Part IV --
13 Deformation Mechanisms of Carbon Fibres and Carbon Fibre Composites --
14 Micromechanical evidences on inter-fibre failure of composites --
15 Progressive Damage in Fibre-Reinforced Composites Towards more Accurate and Efficient Computational Modelling and Analysis --
16 Predicting properties of undamaged and damaged carbon fibre reinforced composites --
Part V --
17 Composites Toughen up ! --
18 Slow cracking in composite materials catastrophic fracture of composite structures --
19 Finite fracture mechanics a useful tool to analyze cracking mechanisms in composite materials --
20 Traction-separation relations in delamination of layered carbon-epoxy composites under monotonic loads Experiments and Modeling --
21 Damage and failure analysis of bolted joints in composite laminates --
22 City Cars made from Composites --
Part VI --
23 A virtual testing approach for laminated composites based on micromechanics --
24 Virtual testing of composite structures Progress and challenges in predicting damage, residual strength and crashworthiness --
25 Contribution of virtual simulation to industrialisation of carbon fiber reinforced polymer composites for manufacturing processes and mechanical performance --
Part VII --
26 Multi scale progressive failure modeling from Nano-structured carbon fibers to textile composites --
27 Textile Structural Composites – from 3-D to 1-D fiber architecture --
28 Experimental and Multiscale Numerical Studies of Woven Fabric Carbon Composite Cylinder Subjected to Internal Pressure Loading --
Part VIII --
29 Fatigue of 2D and 3D carbon-fiber-reinforced polymer matrix composites and of a unitized polymer/ceramic matrix composite at elevated temperature --
30 Carbon Fibers in Tribo-Composites.
Рубрики: Ceramics.
   Glass.
   Composites (Materials).
   Composite materials.
   Materials science.
   Ceramics, Glass, Composites, Natural Materials.
   Characterization and Evaluation of Materials.
Анотація: This book brings together a diverse compilation of inter-disciplinary chapters on fundamental aspects of carbon fiber composite materials and multi-functional composite structures: including synthesis, characterization, and evaluation from the nano-structure to structure meters in length. The content and focus of contributions under the umbrella of structural integrity of composite materials embraces topics at the forefront of composite materials science and technology, the disciplines of mechanics, and development of a new predictive design methodology of the safe operation of engineering structures from cradle to grave. Multi-authored papers on multi-scale modelling of problems in material design and predicting the safe performance of engineering structure illustrate the inter-disciplinary nature of the subject. The book examines topics such as Stochastic micro-mechanics theory and application for advanced composite systems Construction of the evaluation process for structural integrity of material and structure Nano- and meso-mechanics modelling of structure evolution during the accumulation of damage Statistical meso-mechanics of composite materials Hierarchical analysis including "age-aware," high-fidelity simulation and virtual mechanical testing of composite structures right up to the point of failure. The volume is ideal for scientists, engineers, and students interested in carbon fiber composite materials, and other composite material systems.

Перейти: https://doi.org/10.1007/978-3-319-46120-5

Дод.точки доступу:
Beaumont, Peter W. R. \ed.\; Soutis, Constantinos. \ed.\; Hodzic, Alma. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
4.


    Tanaka, Nobuo.
    Electron Nano-Imaging [[electronic resource] :] : basics of Imaging and Diffraction for TEM and STEM / / Nobuo. Tanaka ; . - 1st ed. 2017. - [S. l. : s. n.]. - XXVIII, 333 p. 129 illus., 22 illus. in color. - Б. ц.
    Зміст:
Seeing nanometer-sized world --
Structure and imaging of a transmission electron microscope (TEM) --
Basic theories of TEM imaging --
Resolution and image contrast of a transmission electron microscope (TEM) --
What is high-resolution transmission electron microscopy ? --
Lattice images and structure images --
Imaging theory of high-resolution TEM and image simulation --
Advanced transmission electron microscopy --
What is scanning transmission electron microscopy (STEM)? --
Imaging of scanning transmission electron microscopy (STEM) --
Image contrast and its formation mechanism in STEM --
Imaging theory for STEM --
Future prospects and possibility of TEM and STEM --
Concluding remarks --
Introduction of Fourier transforms for TEM and STEM --
Imaging by using a convex lens: Convex lens as phase shifter --
Contrast transfer function of a transmission electron microscope: Key term for understanding of phase contrast in HRTEM --
Complex-valued expression of aberrations of a round lens --
Cowley's theory for TEM and STEM imaging --
Introduction to the imaging theory for TEM including non-linear terms --
What are image processing methods? --
Elemental analysis by electron microscopes: Analysis using an electron probe --
Electron beam damage to specimens --
Scattering of electrons by an atom: Fundamental process for visualization of a single atom by TEM --
Electron diffraction and convergent beam electron diffraction (CBED): Basis for formation of lattice fringes in TEM and image intensity of STEM --
Bethe's method for dynamical electron diffraction: Basic theory of electron diffraction in thicker crystals --
Column approximation and Howie-Whelan's method for dynamical electron diffraction: Theory for observation of lattice defects --
Van-Dyck's method for dynamical electron diffraction and imaging: Basis of atomic column imaging --
Eikonal theory for scattering of electrons by a potential --
Debye-Waller factor and thermal diffuse scattering (TDS) --
Relativistic effects to diffraction and imaging by a transmission electron microscope: Basic theories for high-voltage electron microscopy.
Рубрики: Materials science.
   Spectroscopy.
   Microscopy.
   Nanoscale science.
   Nanoscience.
   Nanostructures.
   Characterization and Evaluation of Materials.
   Spectroscopy and Microscopy.
   Spectroscopy/Spectrometry.
   Nanoscale Science and Technology.
Анотація: In the present book, the basics of imaging and diffraction in transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) are explained in textbook style. The book focuses on the explanation of electron microscopic imaging of TEM and STEM without including in the main text distracting information on basic knowledge of crystal diffraction, wave optics, mechanism of electron lens, and scattering/diffraction theories, which are explained in detail separately in the appendices. A comprehensive explanation is provided using Fourier transform theory. This approach is unique in comparison with other advanced textbooks on high-resolution electron microscopy. With the present textbook, readers are led to understand the essence of the imaging theories of TEM and STEM without being diverted by facts about electron microscopic imaging. The up-to-date information in this book, particularly for imaging details of STEM and aberration corrections, is valuable worldwide for today’s graduate students and professionals just starting their careers.

Перейти: https://doi.org/10.1007/978-4-431-56502-4

Дод.точки доступу:
Tanaka, Nobuo. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
5.


   
    Advances in Shape Memory Materials [[electronic resource] :] : in Commemoration of the Retirement of Professor Hisaaki Tobushi / / ed. Sun, Qingping. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - X, 241 p. - Б. ц.
    Зміст:
1 Fabrication and output power characteristics of heat engines using tape-shaped SMA element --
2 One-dimensional phase transformation model and its application to damping enhancement analysis --
3 A review on experimental investigations of rate sensitivity of deformation behavior in Fe-based shape memory alloys --
4 Shape memory effect and superelasticity of textured NiTi alloy wire --
5 Development of the technology teaching materials using Ti-Ni shape memory alloy --
6 A review of shape memory polymers thermos-mechanical modeling. Analysis in the frequency domain --
7 Computational study of stretching rate effects on pattern formation in NiTi thin strips --
8 Mechanical properties of shape memory alloys and polymers – A review on the study by Prof. Tobushi --
9 Fatigue property and enhancement of fatigue life of TiNi shape memory alloys - An overview --
10 Intelligent shape memory actuators --
11 Structural and magnetic properties of magnetic shape memory alloys on Ni-Mn-Co-in self-standing films --
12 Simultaneous measurement of continuum strain field and intermittent martensite band nucleation in single crystal Ni-Mn-Ga foils --
13 Thermomechanical coupling and localization effects examined in shape memory alloys and polymers by fast and sensitive infrared camera --
14 Anomalous Properties of TiNi processed by severe plastic deformation --
15 Grain size effects on Young’s modulus and hardness of nanocrystalline NiTi shape memory alloy --
16 Grain size effects on wear resistance of nanocrystalline NiTi shape memory alloy --
17 Experimental study of critical stresses of Fe-28Mn-6Si-5Cr SMA under various temperature conditions --
18 Cyclic compressive responses of NiTi shape memory alloy—effects of loading frequency.
Рубрики: Materials science.
   Engineering design.
   Energy storage.
   Robotics.
   Automation.
   Characterization and Evaluation of Materials.
   Engineering Design.
   Energy Storage.
   Robotics and Automation.
Анотація: This book is devoted to the development of the shape memory materials and their applications. It covers many aspects of smart materials. It also describes the method on how we can obtain not only large recovery strains but also high recovery stress, energy storage and energy dissipation in applications. This volume treats the mechanical properties of shape memory alloys, shape memory polymers and the constitutive equations of the materials which are necessary to design the shape memory elements in applications. It also deals with the fatigue properties of materials, the method to design the shape memory elements, and the shape memory composites. The authors are international experts on shape memory alloys and shape memory polymers in the metallurgical, chemical, mechanical and engineering fields. The book will be of interest to graduate students, engineers, scientists and designers who are working in the field of electric and mechanical engineering, industries, medical engineering, aerospace engineering, robots, automatic machines, clothes and recycling for research, design and manufacturing.

Перейти: https://doi.org/10.1007/978-3-319-53306-3

Дод.точки доступу:
Sun, Qingping. \ed.\; Matsui, Ryosuke. \ed.\; Takeda, Kohei. \ed.\; Pieczyska, Elzbieta A. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
6.


   
    8th International Symposium on High-Temperature Metallurgical Processing [[electronic resource] /] : монография / ed. Hwang, Jiann-Yang. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XXII, 818 p. 421 illus. - Б. ц.
    Зміст:
Part 1: Energy Efficient Clean Metallurgical Technology --
Flash Ironmaking from Magnetite Concentrate in a Laboratory Reactor: Experimental and CFD Work --
Synthesis of Chromite for Subsequent Carburization by Methane-hydrogen Gas Mixture --
Effects of Hydrogen-enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens under BF Operation with Cog Injection --
Microwave-intensified Reduction of Biochar-containing Briquettes --
Refractory Challenges in Lead Recycling Furnaces --
Synthesis of Carbide Ceramics via Reduction of Adsorbed Anions on an Activated Carbon Matrix --
Part 2: Simulation of High Temperature Process --
A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2+CO Mixtures in a Drop Tube Reactor --
A Continuous Dynamic Process Model to Design a Carbon Profile toward Yield Improvement --
Alloy Yield Prediction Model Based on the Data Analysis in EAF Steelmaking Process --
Analysis of Jet Behavior and Surface Fluctuations in the Meniscus of Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling --
CFD Study of Gas-liquid Phase Interaction Inside a Submerged Lance Smelting Furnace for Copper Smelting --
Debottlenecking High Temperature Metallurgical Plants through Modeling and Simulation --
Assessment of Slag Entrainment in a RH Degasser through Physical Modelling Using Circulating Fluids of Different Densities/Oil Systems for Simulating Steel Melt/Slag --
Part 3: Fundamental Research of Metallurgical Process --
Investigate on the Phase Composition of Vanadium Slag with High CaO Content and Influence of P2O5 on Crystallization Kinetics of Spinels --
Thermal Analysis Kinetics of the Solid-State Reduction of Nickel Laterite Ores by Carbon --
Thermodynamic and Experimental Investigations of High Temperature Refractory Corrosion by Molten Slags --
Thermodynamic Calculation on the Reactivity between Slag and Ti-stabilized Stainless Steel --
Part 4: Alloys and Materials Preparation --
Development of a Novel, Low-cost Titanium Extraction Process for Bulk or Powder Applications --
Evolution of Non-metallic Inclusions in Solid Fe-Al-Ti-N Alloy during Heating --
Preparation of Low-carbon Ti2O3 by Carbon thermal Reduction of the Mixture of Titanium Dioxide and Activated Carbon under Vacuum Condition --
Pyrometallurgical Studies for Manganese Extraction Using Turkish Ore Reserves --
Trace Elements Behavior during the Oxidation of Liquid SiMn Alloy --
Effect of Microalloy Elements V And Mg on Organization at High Heat Input Welding Shipbuilding Structure Steel --
Part 5: Extraction and Recovery of Metals --
Effect of Carbon Reductant On The Formation of Copper Doped Titanium Oxycarbonitride by Carbothermal Reduction and Nitridation --
Cohering Behavior of Scrap Powder in Kiln by a Novel Natural Stacking Method --
Direct-to-blister Copper Smelting with the ISASMELT™ Process --
Improving Separation of Cu-Fe from Copper Slag by Mineral Phase Reconstruction --
Phase Transformation of High Calcium Type Tin, Iron-bearing Tailings during Magnetizing Roasting Process --
Sensitivity of Contactless Ultrasound Processing to Variations of the Free Surface of the Melt with Induction Heating --
Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-leaching Process --
Part 6: Ironmaking and Steelmaking --
Influence of Puhrstahl Heraeus Refining Process on Aluminum Consumption in Interstitial-Free Steel Smelting Process --
Formation Mechanisms of Inclusions in Spring Steels --
Investigation on Coal Combustion Behaviors under the Oxygen Blast Furnace --
Inclusion Control with Ca Treatment to Improve Castability of a Low Carbon Al Killed Steel --
High Temperature Mineralization Mechanism of Granules during Iron Ore Sintering Process --
Reduction Behaviors of Sinter Made from Magnetite Concentrates in Reducing Process Simulated COREX Shaft Furnace --
Part 7: Treatment and Recycling of Slag/Wastes --
Introduction of Matte Droplets in Copper Smelting Slag --
Dissolution Behavior of Fe from Glassy Oxide Phase in Steelmaking Slag --
Penetration Depth of Microwave in Tire Rubber --
Effect of TiO2 on Thermophysical Properties and Structure of P-bearing Steelmaking Slags --
Analysis for Optimum Conditions for Recovery of Valuable Metals from E-Waste through Black Copper Smelting --
Precipitation Behavior of MxTi3-xO5 in the Titanium-Bearing Electric Furnace Slag --
Part 8: Utilization of Complex Ores --
Evaluation of Molybdenum Concentrates --
Intensification of Gold Leaching from a Multi-refractory Gold Concentrate by the Two-stage Roasting-alkaline Sulfide Washing-cyanidation Process --
The Recovery of Cobalt from Copper Converter Slag by Reduction-sulfurization Smelting at High Temperature --
Roasting of Celestite in Laboratory Scale Rotary Furnace --
The Experimental Study of CaCO3 in the Vanadium Extraction Process --
The Extraction of Zinc from Zinc Ferrite by Calcified Roasting and Ammonia Leaching Process --
Part 8: Poster I --
A New Method to Detect the High Temperature Distribution in the Ironmaking and Steelmaking Industry --
A Study for Reconstructing the Three-dimensional Temperature Field of a Blast Furnace Raceway Based on Monte Carlo Method --
Behaviour of Silicon in Nickel Laterite by Carbothermic Reduction in Vacuum --
Effect of CaO Addition on the Behavior of Vanadium and Phosphorus during Oxidation and Leaching Process --
Effect of Inner Shape on Blast Furnace Performance for Iron Making --
Effect of Lance Configurations on Coal Flow and Combustion Characteristics --
Effect of Silicon on Removal of Phosphorus from High Phosphorus Si-Mn alloy by CaO-Based Slag --
Effect of Super Gravity on the Solidification Structure and C Segregation of High Carbon Steel --
High Temperature Distribution Measurement of the Blast Furnace Raceway through Imaging Techniques and Optimization Algorithms --
Kinetics and Reduction Behavior of Self-reducing Briquettes Containing Blast Furnace Dust --
Model Analysis of the Phenomena of Pulverized Coal Injection in Blast Furnace --
Sintering Performance of Blends Containing High Proportion of Limonite Iron Ore Fines --
Thermodynamics Study on Phosphorus Distribution between 2CaO•SiO2-3CaO•P2O5 Solid Solution and Liquid Slag --
Two-step Copper Smelting Process at Dongying Fangyuan --
Part 9: Poster II --
Comparison of the Ringing Characteristics between Acid and Alkaline Iron Ore Pellets Powder in Kiln --
Comprehensive Utilization of Ludwigite Iron Concentrate by Gas-based Direct Reduction --
Decarburization of Spent Petrochemical Catalysts via Microwave Oxidation Roasting --
Effect of FeO Content in Laterite Nickel Slag on the Corrosioin Behaviour of Refractory Materials --
Effects of Blowing Conditions on the Dispersion States of Materials Charged into Bottom Blown Oxygen Smelting Furnace --
Effects of Pre-oxidation and Additives on Carbothermic Reduction of Ilmenite Concentrate --
Influence of Converter Slag on Decomposition Behavior of Limestone during BOF Steelmaking Process --
Influence of Hot Charge on Blast Furnace Performance for Iron Making --
Investigation and Application of Evolution System of Stock Surface Gas Flow Distribution in Blast Furnace --
Investigation of the Carbothermic Reduction of Chromium-containing Vanadium Extraction Residue --
Molecular Dynamics Study of the Structural Properties with Varying --
One-step Extraction of Lead from Spent Lead-acid Battery Paste via Reductive Sulfur-fixing Smelting: Thermodynamic Analysis --
Removal of Cd(II) Ion from Aqueous Solution by Adsorption on Wasted Low Grade Phosphorus-containing Iron Ore --
Research on the Flow Behavior of Molten Slag through Pore --
Study on the Influence of Materials on Heat Transfer Characteristics of Blast Furnace Cooling Staves.
Рубрики: Materials science.
   Metals.
   Engineering—Materials.
   Characterization and Evaluation of Materials.
   Metallic Materials.
   Materials Engineering.
Анотація: This collection features contributions covering the advances and developments of new high-temperature metallurgical technologies and their applications to the areas of: processing of minerals; extraction of metals; preparation of metallic, refractory, and ceramic materials; treatment and recycling of slag and wastes; conservation of energy; and environmental protection. The volume will have a broad impact on the academics and professionals serving the metallurgical industries around the world by providing them with comprehensive coverage of a wide variety of topics.

Перейти: https://doi.org/10.1007/978-3-319-51340-9

Дод.точки доступу:
Hwang, Jiann-Yang. \ed.\; Jiang, Tao. \ed.\; Kennedy, Mark William. \ed.\; Yucel, Onuralp. \ed.\; Pistorius, P. Chris. \ed.\; Seshadri, Varadarajan. \ed.\; Zhao, Baojun. \ed.\; Gregurek, Dean. \ed.\; Keskinkilic, Ender. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
7.


   
    Energy Materials 2017 [[electronic resource] /] : монография / ed. Liu, Xingbo. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XXII, 457 p. 256 illus. - Б. ц.
    Зміст:
Part 1: Energy and Environmental Issues in Materials Manufacturing and Processing: Opportunities in the Steel Industry --
Waste Energy Recovery Technology of Iron and Steel Industry in China --
Green Manufacturing Process of Shougang Jingtang Steel Plant --
The Introduction and Process Optimization Research of Oxygen Blast Furnace Ironmaking Technology --
Prediction and optimal scheduling of byproduct gases in steel mill: Trends and challenges --
Processing Non-Oriented Electrical Steels Using Inclined/Skew Rolling Schemes --
A Possible Way for Efficient Utilization of Coal Energy: The Combined Process of Ironmaking with Gasoline Synthesis and Electricity Generation --
The influence of water vapour on the fuming rate in a ferromanganese system --
Part 2: Energy and Environmental Issues in Materials Manufacturing and Processing: Opportunities in Aluminum Production, Waste Heat and Water Recovery --
Approach for pyrolysis gas release modelling and its potential for enhanced energy efficiency of aluminium remelting furnaces --
Numerical approach for the implementation of the interaction of pyrolysis gases and combustion products in an aluminium melting furnace --
Fluoropolymer Coated Condensing Heat Exchangers for Low-grade Waste Heat Recovery --
Nitrate and other anion removal from waste water using the Hydroflex technology --
Mechanical Analysis of Raceway Formation in Bulk Bed of Blast Furnace --
Part 3: Materials for Coal-Based Power: Materials For Coal-Based Power: Session I --
Ni-Fe based alloy GH984G used for 700 coal-fired power plant --
Part 4: Materials for Coal-Based Power: Materials For Coal-Based Power: Session II --
Creep strength and oxidation resistance of industrially made G115 Steel pipe --
Accelerated creep test for new steels and welds --
Part 5: Materials for Coal-Based Power: Materials For Coal-Based Power: Session IV --
The Reliability Analysis of 12Cr1MoVG and T23 Used for USC Boilers Water Wall --
Part 6: Materials for Coal-Based Power: Poster Session --
Effect of high-frequency induction hardening on stress corrosion of a 12% Cr martensitic stainless steel --
Fireside corrosion behaviors of Inconel 740 H superalloy in various SO2 contents --
High Cycle Fatigue Behavior of HAYNES282 Superalloy --
Recent Development in the Characteristics of Alloy 625 for A-USC Steam Turbine Castings --
Part 7: Materials for Gas Turbines: Coatings --
EVOLUTION OF THE THERMAL CONDUCTIVITY OF Sm2Zr2O7 UNDER CMAS ATTACK --
Part 8: Materials for Gas Turbines: Hot Corrosion and New Materials --
Development of a new high strength and hot corrosion resistant directionally solidified superalloy DZ409 --
Part 9: Materials for Gas Turbines: Microstructure and Processing --
Modeling the Diffusion of Minor Elements in Different MCrAlY – Superalloy Substrates at High Temperature --
ON HEALING MECHANISM OF CAST POROSITIES IN CAST NI-BASED SUPERALLOY BY HOT ISOSTATIC PRESSING --
The Influence of Dendritic Segregation Degree to the Recrystallization Nucleation in U4720LI --
Part 10: Materials for Gas Turbines: Poster Session --
Stress Rupture Properties of Alloy 783 --
Study on the Undercoolability and Single Crystal Castability of Nickel-Based Superalloys --
Part 11: Materials for Nuclear Energy: Materials for Nuclear Applications I --
Enhancing the High-Cycle Fatigue Property of 316 Austenitic Stainless Steels through Introduction of Mechanical Twins by Cold-Drawing --
Part 12: Materials for Nuclear Energy: Materials for Nuclear Applications II --
Microstructure Evolution of a Reactor Pressure Vessel Steel during High-temperature Tempering --
Part 13: Materials for Nuclear Energy: Environmental Effects --
Effect of Steam Pressure on the Oxidation Behaviour of Alloy 625 --
Friction Stir Processing of Degraded Austenitic Stainless Steel Nuclear Fuel Dry Cask Storage System Canisters --
Part 14: Materials for Nuclear Energy: Accident Tolerant Fuels & Irradiation Effects --
The Mechanical Response of Advanced Claddings during Proposed Reactivity Initiated Accident Conditions --
First principles investigations of alternative nuclear fuels --
Comparative study of thermal conductivity of SiC and BeO from ab initio calculations --
Part 15: Materials for Oil and Gas and AMREE Oil & Gas III --
Anisotropic behaviors for X100 high grade pipeline steel under stress constraints --
Co-relation of microstructural features with tensile and toughness characteristics of X70 grade steel --
Development and applications of new generation Ni-containing cryogenic steels in China --
Microstructure analysis and weldability investigation of stainless steel clad plate --
Microstructure and Properties of High Performance Pipeline Steels --
Sensitivity variation of nanomaterials at different operating temperature conditions.
Рубрики: Materials science.
   Engineering—Materials.
   Energy systems.
   Characterization and Evaluation of Materials.
   Materials Engineering.
   Energy Systems.
Анотація: This collection highlights materials research and innovations for a wide breadth of energy systems and technologies. The volume includes papers organized into the following sections: Energy and Environmental Issues in Materials Manufacturing and Processing Materials in Clean Power Materials for Coal-Based Power Materials for Energy Conversion with Emphasis on SOFC Materials for Gas Turbines Materials for Nuclear Energy Materials for Oil and Gas.

Перейти: https://doi.org/10.1007/978-3-319-52333-0

Дод.точки доступу:
Liu, Xingbo. \ed.\; Liu, Zhengdong. \ed.\; Brinkman, Kyle. \ed.\; Das, Subodh. \ed.\; Dryepondt, Sebastien. \ed.\; Fergus, Jeffery W. \ed.\; Guo, Zhancheng. \ed.\; Han, Minfang. \ed.\; Hawk, Jeffrey A. \ed.\; Horita, Teruhisa. \ed.\; Hosemann, Peter. \ed.\; Li, Jian. \ed.\; Olivetti, Elsa. \ed.\; Pandey, Amit. \ed.\; Rebak, Raul B. \ed.\; Roy, Indranil. \ed.\; Shang, Chengjia. \ed.\; Zhang, Ji. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
8.


   
    Characterization of Minerals, Metals, and Materials 2017 [[electronic resource] /] : монография / ed. Ikhmayies, Shadia. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XXIX, 872 p. 480 illus. - Б. ц.
    Зміст:
Part 1: Soft Materials --
Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites --
Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique --
Izod impact tests in polyester matrix composites reinforced with blanket of the malva and jute fibers --
Tensile Behavior of Epoxy Matrix Composites Reinforced With Eucalyptus Fibers --
The dimensional characterization of jute fabric strips for reinforcement in composite polymeric --
Izod Toughness Behavior of Continuous PALF Fibers Reinforced Polyester Matrix Composites --
Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide --
Radiation Effects on Crosslinking of Butyl Rubber Compounds --
Part 2: Clays and Ceramics --
Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer --
Aging behaviour in Ni0.5CoxMn2.5-xO4 (x=0.5, 0.8 and 1.1) thermistors --
Adsorption of lead from aqueous solutions to bentonite and composite --
Part 3: Electronic, Magnetic, Environmental, and Advanced Materials --
Characterization Of Low-Zinc Electric Arc Furnace Dust --
GAMMA-RADIATION EFFECT ON BIODEGRADABILITY OF SYNTHETIC PLA STRUCTURAL FOAMS PP/HMSPP BASED --
STUDY OF FLEXIBLE FILMS PREPARED FROM PLA/PBAT BLEND AND PLA e-BEAM IRRADIATED AS COMPATIBILIZING AGENT --
Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method --
Part 4: Nano Materials --
Electrical and microstructural investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 temperature sensors --
Enhanced physical properties of thin film nanocomposites --
A study on the size and type of inclusions in Si-Mn combined deoxidated low carbon steel strip --
Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-powder Composites --
Part 5: Alloys --
Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101 --
MICROSTRUCTUAL INVESTIGATION AND IMPACT TESTING OF ADDITIVE MANUFACTURED TI-6AL-4V --
Part 6: Powders and Foams --
SYNTHESIS OF TiN NANO-COMPOSITE POWDER BY HIGH-ENERGY BALL MILLING OF TiH2 UNDER NITROGEN ATMOSPHERE --
Application of AFM in Morphology Determination of Powder Material --
Effects of Thermal Processing on Closed-Cell Aluminium Foams --
Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams under Drop Weight Impact --
Deformation Mechanisms of Closed Cell-Aluminium Foams during Drop Weight Impact --
Part 7: Minerals --
INDUSTRIAL USE OF BRAZILIAN BENTONITE MODIFIED BY MILD ACID ATTACK --
Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation --
Ore Dressing and Technological characterization of Palygorskite from Piaui/Brazil for applications as adsorbent of heavy metals --
TECHNOLOGICAL CHARACTERIZATION OF WASTE FROM GOLD MINING DAM --
Synthesis and Characterization of Sodalite and Cancrinita from Kaolin --
Part 8: Ferrous Metals --
Effects of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter --
Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis --
Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO-CO2 Atmospheres --
Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors --
Important Factors to Consider in FIB Milling of Crystalline Materials --
Part 9: Material Processing and Corrosion --
Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl media --
Effect of bromide ions on the pitting corrosion of hafnium in anhydrous t-butanol and acetonitrile --
Compression Behavior of Semi-Closed Die Forged AZ80 Extrusion --
Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique --
Part 10: Method Development --
Development of A New Recycling Process of PGM from Metal-supported Catalyst Using Complex Oxide --
Part 11: Composites --
High thermal conducting composites using percolation theory --
SORPTION CHARACTERISTICS OF LOW DENSITY POLYETHYLENE/KOLA NUT COMPOSITE --
Residual Stress Analysis within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction --
Tensile Behavior of Epoxy Matrix Composites Reinforced With Pure Ramie Fabric --
Hemp Fiber Density Using the Pycnometer Technique --
Preparation and Characterization of Clay Exfoliation and Vegetal fibre on Properties of Recycled Low Density Polyethylene (rLDPE) --
Part 12: Ferrous Metals --
Estimation of Dislocation Density in Metals from Microhardness Test --
Part 13: Welding and Solidification --
Interfacial strength characterization in a high-modulus low-density steel-based Fe-TiB2 composite --
Part 14: Materials Extractions --
Leaching of Copper-Cobalt Tailings from the Democratic Republic of Congo --
OPTIMUM OPERATING CONDITIONS FOR EXTRACTION OF LIGNIN PRECURSORS FROM PALM FRUIT BUNCH --
SELECTION ON THE PROCESS FOR ENRICHING GOLD FROM REFRACTORY GOLD ORES BY SMELTING --
SELECTION ON THE PROCESS FOR REMOVING AND RECOVERING ANTIMONY FROM ANTIMONIAL REFRACTORY GOLD ORES --
Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings --
CHARACTERIZATION OF SPENT PRINTED CIRCUIT BOARDS FROM COMPUTERS --
Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte --
Part 15: Poster Session --
Addition of Cellulose Nanofibers in Reactive Powder Concrete --
ADVANCED ION COLUMN SOLUTION FOR LOW ION DAMAGE CHARACTERIZATION AND ULTRA-FINE PROCESS --
Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise --
Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal --
Characteristics of stamp charging coke and top charging coke --
Characterization and leaching proposal of Ag ( I) from a Zn concentrate --
Characterization and Mechanical Properties of Additively Manufactured Stainless Steel 316L --
CHARACTERIZATION OF MERCURY JAROSITE --
Characterization of steel production dust and their use in structural ceramics --
CHARPY TOUGHNESS BEHAVIOR OF JUTE FABRIC REINFORCED POLYESTER MATRIX COMPOSITES --
Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo --
Contribution to the ? relaxation study of the HDPE, LDPE and LLDPE --
Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES --
Effects of wet grinding on the structure and granularity of biological origin aragonite and its polymorphic transformation into calcite --
EVALUATION OF BALLISTIC ARMOR BEHAVIOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS --
EVALUATION OF THE POZZOLANIC ACTIVITY OF RESIDUE FROM THE PAPER INDUSTRY --
EVALUATION OF THE PROPERTIES OF THE ADHESIVE MORTAR IN THE FRESH STATE WITH ADDITION OF GLASS WASTE --
Experimental Evaluation of the Influence of Mortar’s Mechanical Properties on The Behavior of Clay Masonry --
Influence of Operation Conditions on Normal Stress and Flow Pattern of Burden Materials in Blast Furnace Based on Discrete Element Method --
Polymer Blend based on recycled polyethylene and ethylene vinyl acetate copolymers reinforced with natural fibers from agricultural wastes --
Preliminary study of the effect of stirring rate, temperature and oxygen pressure on the leach rate of copper powder, generated by grinding of printed circuit boards of computer --
Preparation and Characterization of Polyethylene Nanocomposites with Clay and Silver Nanoparticles --
Production of concrete interlocking blocks with partial replacement of sand in bulk by waste glass machined --
Reactive Powder Concrete Production with the Addition of Granite Processing Waste --
Research on the reason of the different type of chloride forming in the process of blast furnace ironmaking --
Stress and Deformation Analysis of Hot Blast Stove Piping System --
Stress and Deformation Analysis of Top Combustion Hot Blast Stove Shell --
STUDY OF CALCINED MIXTURES FROM INDUSTRIAL RESIDUES FOR PRODUCTION OF AGGLOMERATES --
STUDY OF SYNERGISTIC EFFECT OF LIGHT STABILIZER ADDITIVE, CONVENTIONAL AND NANOPARTICLES, APPLIED TO POLYETHYLENE FILMS SUBMITTED TO ULTRAVIOLET RADIATION --
Study of the effect of surface liquid flow during column flotation of mining tailing of the Dos Carlos dam --
STUDY ON BENDING TEST ON CONCRETE STRUCTURAL USE CRUMB RUBBER AS SUBSTITUTE IN FINE AGGREGATE --
Synthesis and structural characterization of BaTiO3 doped with Gd3+ --
Texture analysis and anisotropic properties of a rolled CuZn36 brass alloy --
The influence of titanium content on the sinter ore phase structure and the crack --
The use of Network Simplex method for planning the incorporation of recycled paper mill sludge in manufacturing of ceramic bodies --
USE OF ALKALINE SOLID WASTES FROM KRAFT PULP AND PAPER MILLS, DREGS AND GRITS IN CEMENT PRODUCTION --
Wood-to-concrete joints using steel connectors: experimental evaluation.
Рубрики: Materials science.
   Structural materials.
   Engineering—Materials.
   Characterization and Evaluation of Materials.
   Structural Materials.
   Materials Engineering.
Анотація: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Coverage is well-rounded from minerals, metals, and materials characterization and developments in extraction to the fabrication and performance of materials. In addition, topics as varied as structural steels to electronic materials to plant-based composites are explored. The latest research presented in this wide area make this book both timely and relevant to the materials science field as a whole. The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials. Topics covered include ferrous materials, non-ferrous materials, minerals, ceramics, clays, soft materials, method development, processing, corrosion, welding, solidification, composites, extraction, powders, nanomaterials, advanced materials, and several others.

Перейти: https://doi.org/10.1007/978-3-319-51382-9

Дод.точки доступу:
Ikhmayies, Shadia. \ed.\; Li, Bowen. \ed.\; Carpenter, John S. \ed.\; Li, JIan. \ed.\; Hwang, Jiann-Yang. \ed.\; Monteiro, Sergio Neves. \ed.\; Firrao, Donato. \ed.\; Zhang, Mingming. \ed.\; Peng, Zhiwei. \ed.\; Escobedo-Diaz, Juan P. \ed.\; Bai, Chenguang. \ed.\; Kalay, Yunus Eren. \ed.\; Goswami, Ramasis. \ed.\; Kim, Jeongguk. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
9.


   
    Designing of Elastomer Nanocomposites: From Theory to Applications [[electronic resource] /] : монография / ed.: Stockelhuber, Klaus Werner., Das, Amit., Kluppel, Manfred. - 1st ed. 2017. - [S. l. : s. n.]. - XII, 402 p. - Б. ц.
    Зміст:
The extended non-affine tube model for crosslinked polymer networks: A summary of its physical basics, implementation and application to thermo-mechanical finite element analyses --
Reinforcement of rubber and filler network dynamics at small strains --
Multiscale Contact Mechanics with Application to Seals and Rubber Friction on Dry and Lubricated Surfaces --
Multiscale modeling approach to dynamic-mechanical behavior of elastomer nanocomposites --
Networks - from rubbers to food --
Nanostructured Ionomeric Elastomers --
Graphene based elastomer nanocomposites: Functionalization techniques, morphology and physical properties --
Characterization and Application of Graphene Nano-Platelets in Elastomers --
The tearing energy as fracture mechanical quantity for elastomers.
Рубрики: Polymers  .
   Materials science.
   Condensed matter.
   Ceramics.
   Glass.
   Composites (Materials).
   Composite materials.
   Polymer Sciences.
   Characterization and Evaluation of Materials.
   Condensed Matter Physics.
   Ceramics, Glass, Composites, Natural Materials.
Анотація: The series Advances in Polymer Science presents critical reviews of the present and future trends in polymer and biopolymer science. It covers all areas of research in polymer and biopolymer science including chemistry, physical chemistry, physics, material science. The thematic volumes are addressed to scientists, whether at universities or in industry, who wish to keep abreast of the important advances in the covered topics. Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist. Review articles for the individual volumes are invited by the volume editors. Single contributions can be specially commissioned. Readership: Polymer scientists, or& nbsp;scientists in related fields interested in polymer and biopolymer science, at universities or in industry, graduate students.

Перейти: https://doi.org/10.1007/978-3-319-47696-4

Дод.точки доступу:
Stockelhuber, Klaus Werner. \ed.\; Das, Amit. \ed.\; Kluppel, Manfred. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
10.


    Robles Hernandez, Hernandez, Francisco C.
    Al-Si Alloys [[electronic resource] :] : automotive, Aeronautical, and Aerospace Applications / / Hernandez, Francisco C. Robles Hernandez, Herrera Ramirez, Jose Martin., Mackay, Robert. ; . - 1st ed. 2017. - [S. l. : s. n.]. - XIX, 237 p. 155 illus., 123 illus. in color. - Б. ц.
Рубрики: Materials science.
   Thermodynamics.
   Heat engineering.
   Heat transfer.
   Mass transfer.
   Transportation.
   Aerospace engineering.
   Astronautics.
   Automotive engineering.
   Characterization and Evaluation of Materials.
   Engineering Thermodynamics, Heat and Mass Transfer.
   Transportation.
   Aerospace Technology and Astronautics.
   Automotive Engineering.
Анотація: This book details aluminum alloys with special focus on the aluminum silicon (Al?Si) systems – that are the most abundant alloys second only to steel. The authors include a description of the manufacturing principles, thermodynamics, and other main characteristics of Al?Si alloys. Principles of processing, testing, and in particular applications in the Automotive, Aeronautical and Aerospace fields are addressed. Discusses aluminum silicon alloy selection, manufacturing, applications with particular attention to the issues of mechanical properties and soundness; Includes key technologies for aluminum silicon alloys such as casting, chemical and electromagnetic processing, casting, powder metallurgy, and applications for automotive,  and aerospace use; Addresses both, hypo and hypereutectic, alloys and their applications in-depth.

Перейти: https://doi.org/10.1007/978-3-319-58380-8

Дод.точки доступу:
Herrera Ramirez, Jose Martin.; Mackay, Robert.; Robles Hernandez, Francisco C. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
11.


   
    Materials for Chemical Sensing [[electronic resource] /] : монография / ed.: Cesar Paixao, Thiago Regis Longo., Reddy, Subrayal Medapati. - 1st ed. 2017. - [S. l. : s. n.]. - IX, 268 p. 126 illus., 98 illus. in color. - Б. ц.
    Зміст:
Introduction of Materials Used in Chemical Sensors --
Information Extraction Techniques in Chemical Sensing --
(Bio)Chemical Sensors Based on Paper --
Membrane Technologies for Sensing and Biosensing --
Interfacing Graphene for Electrochemical Biosensing --
Nanomaterials as Implantable Sensors --
Self-assembly Thin Films for Sensing --
Phthalocyanines as Sensitive Materials for Chemical Sensors --
Materials for Electronic Tongues: Smart Sensor Combining Different Materials and Chemometric Tools.
Рубрики: Materials science.
   Analytical chemistry.
   Nanotechnology.
   Characterization and Evaluation of Materials.
   Analytical Chemistry.
   Nanotechnology and Microengineering.
Анотація: This book covers new materials used as analytical devices for increasing the interactions between the development of new analytical devices and materials science. The authors describe how different types of materials such as polymers, self-assembled layers, phthalocyanines, and nanomaterials can further enhance sensitivity and promote selectivity between analytes for different applications. They explain how continuing research and discussion into materials science for chemical sensing is stimulating the search for different strategies and technologies that extract information for these chemical sensors in order to obtain a chemical fingerprint of samples.

Перейти: https://doi.org/10.1007/978-3-319-47835-7

Дод.точки доступу:
Cesar Paixao, Thiago Regis Longo. \ed.\; Reddy, Subrayal Medapati. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
12.


   
    XAFS Techniques for Catalysts, Nanomaterials, and Surfaces [[electronic resource] /] : монография / ed.: Iwasawa, Yasuhiro., Asakura, Kiyotaka., Tada, Mizuki. - 1st ed. 2017. - [S. l. : s. n.]. - IX, 556 p. 259 illus., 226 illus. in color. - Б. ц.
Рубрики: Catalysis.
   Spectroscopy.
   Microscopy.
   Materials science.
   Materials—Surfaces.
   Thin films.
   Nanotechnology.
   Catalysis.
   Spectroscopy and Microscopy.
   Characterization and Evaluation of Materials.
   Surfaces and Interfaces, Thin Films.
   Nanotechnology.
Анотація: This book is a comprehensive, theoretical, practical, and thorough guide to XAFS spectroscopy. The book addresses XAFS fundamentals such as experiments, theory and data analysis, advanced XAFS methods such as operando XAFS, time-resolved XAFS, spatially resolved XAFS, total-reflection XAFS, high energy resolution XAFS, and practical applications to a variety of catalysts, nanomaterials and surfaces. This book is accessible to a broad audience in academia and industry, and will be a useful guide for researchers entering the subject and graduate students in a wide variety of disciplines.

Перейти: https://doi.org/10.1007/978-3-319-43866-5

Дод.точки доступу:
Iwasawa, Yasuhiro. \ed.\; Asakura, Kiyotaka. \ed.\; Tada, Mizuki. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
13.


   
    Materials Design and Applications [[electronic resource] /] : монография / ed. Silva, Lucas F. M. da. - 1st ed. 2017. - [S. l. : s. n.]. - X, 431 p. 269 illus., 175 illus. in color. - Б. ц.
    Зміст:
Selected Properties of P/M Ti-6Al-2Sn-4Zr-6Mo Alloy after Hot Deformation --
Positron Annihilation Study on Nanocrystalline Copper Thin Films Doped with Nitrogen --
The Influence of Microstructure on Mechanical Behaviour for Dual Phase Steels --
Application of Cutting Edges with High Durability Made of Nanocrystalline Cemented Carbides --
Development and Validation of a Numerical Model of a Carbon Orthotic for Lower Limbs --
Magnetic Pulse Welding of Dissimilar Materials: Aluminum–Copper.
Рубрики: Materials science.
   Engineering—Materials.
   Mechanics.
   Mechanics, Applied.
   Characterization and Evaluation of Materials.
   Materials Engineering.
   Solid Mechanics.
Анотація: This volume features fundamental research and applications in the field of the design and application of engineering materials, predominantly within the context of mechanical engineering applications. This includes a wide range of materials engineering and technology, including metals, e.g., polymers, composites, and ceramics. Advanced applications would include manufacturing in the new or newer materials, testing methods, multi-scale experimental and computational aspects. This book features fundamental research and applications in the design of engineering materials, predominantly within the context of mechanical engineering applications such as automobile, railway, marine, aerospace, biomedical, pressure vessel technology, and turbine technology. It covers a wide range of materials, including metals, polymers, composites, and ceramics. Advanced applications include the manufacturing of new materials, testing methods, multi-scale experimental and computational aspects. p.

Перейти: https://doi.org/10.1007/978-3-319-50784-2

Дод.точки доступу:
Silva, Lucas F. M. da. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
14.


   
    Materials Processing Fundamentals 2017 [[electronic resource] /] : монография / ed.: Allanore, Antoine., Lambotte, Guillaume., Lee, Jonghyun. - 1st ed. 2017. - [S. l. : s. n.]. - X, 146 p. 85 illus. - Б. ц.
    Зміст:
Part 1: Steelmaking --
Development of ultrahigh-basicity mold fluxes for peritectic steel continuous casting --
Part 2: Metal Extraction --
Applied statistical analysis on the calcination process in the ferronickel production --
The Chemical Stability and Electrochemical Behavior of Dy2O3 in Molten CaCl2 --
Part 3: Molten & Gas State Processing --
Influence of Oxygen on Surface Tension of Zr --
Part 4: Solid-State Processing --
Evaluation feature of Nano Grain Growth of TiO2 Thin Film via Sol- gel Route --
Part 5: Molten & Gas State Processing --
Thermal analyses of silver-based sulfosalts in air --
Oscillation of a Zirconium Droplet – Experiments and Numerical Simulations --
Gallium Evaporation Behavior for Purification in Molecular Beam Epitaxy (MBE) --
Mass Transfer of Al and Ca Between Silicon and Synthetic SiO2-CaO-Al2O3 Slags --
Part 6: Poster Session --
The interface characteristics of high-temperature melt of CaO-Al2O3-MgO-SiO2 system --
Effect of Modeling flows on Mixing Time in 40t Ladle with Bottom Gas Blowing Process --
Study Of Electrochemical Reactor Filter-Press Used In The Treatment Of Industrial Waste By COMSOL --
Genetic Influence of Mold Corner Structure on the Strand Corner Temperature in Secondary Cooling Zone during Slab Continuous Casting.
Рубрики: Materials science.
   Engineering—Materials.
   Metals.
   Characterization and Evaluation of Materials.
   Materials Engineering.
   Metallic Materials.
Анотація: Covering the physical and numerical modeling of materials processing, this book includes contributions across the range of metals and minerals. This collection offers a unique opportunity to present models and results for key processes involved in extraction, joining, separation, and casting of materials. The corresponding fundamentals of mass and heat transport as well as physical and thermodynamics properties are addressed, allowing for a cross-disciplinary vision of the field.

Перейти: https://doi.org/10.1007/978-3-319-51580-9

Дод.точки доступу:
Allanore, Antoine. \ed.\; Lambotte, Guillaume. \ed.\; Lee, Jonghyun. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
15.


    Zuo, Jian Min.
    Advanced Transmission Electron Microscopy [[electronic resource] :] : imaging and Diffraction in Nanoscience / / Jian Min. Zuo, Spence, John C.H. ; . - 1st ed. 2017. - [S. l. : s. n.]. - XXVI, 729 p. 310 illus., 218 illus. in color. - Б. ц.
    Зміст:
Introduction and historical background --
Electron Waves and Wave Propagation --
The geometry of electron diffraction patterns --
Kinematical Theory of Electron Diffraction --
Dynamical Theory of Electron Diffraction for Perfect Crystals --
Electron optics --
Lens aberrations and Aberration Correction --
Electron Sources --
Electron Detectors --
Instrumentation and experimental techniques --
Crystal symmetry --
Crystal structure and bonding --
Diffuse Scattering --
Atomic resolution electron imaging --
Imaging and characterization of crystal defects --
Strain Measurements and Mapping --
Structure of Nanocrystals, Nanoparticles and Nanotubes.
Рубрики: Materials science.
   Lasers.
   Photonics.
   Nanochemistry.
   Nanoscale science.
   Nanoscience.
   Nanostructures.
   Nanotechnology.
   Solid state physics.
   Characterization and Evaluation of Materials.
   Optics, Lasers, Photonics, Optical Devices.
   Nanochemistry.
   Nanoscale Science and Technology.
   Nanotechnology.
   Solid State Physics.
Анотація: This volume expands and updates the coverage in the authors' classic 1992 book, "Electron Microdiffraction." As the title implies, the focus of the book has changed from electron microdiffraction, or convergent beam electron diffraction, to electron nanodiffraction and the applications of electron diffraction from single crystals as well as general structure analysis of single crystals, powders, and nanostructures. Advanced Transmission Electron Microscopy provides a comprehensive treatment of theory and practice, and is written at a level suitable for advanced undergraduate students and graduate students and researchers in materials science, chemistry, and physics. Practical guides are provided for interpretation and simulation of electron diffraction patterns.

Перейти: https://doi.org/10.1007/978-1-4939-6607-3

Дод.точки доступу:
Spence, John C.H.; Zuo, Jian Min. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
16.


   
    Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) [[electronic resource] /] : монография / ed. Mason, Paul. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - XVI, 381 p. 200 illus. - Б. ц.
    Зміст:
An Attempt to Integrate Software Tools at Microscale and Above Towards an ICME Approach for Heat Treatment of a DP Steel Gear with Reduced Distortion --
Integrated Microstructure based Modelling of Process-Chain for Cold Rolled Dual Phase Steels --
Improving Manufacturing Quality using Integrated Computational Materials Engineering --
ICME Based Hierarchical Design Using Composite Materials for Automotive Structures --
Towards Bridging the Data Exchange Gap Between Atomistic Simulations and Larger Scale Models --
A Flowchart Scheme for Information Retrieval in ICME settings --
An Ontological Framework for Integrated Computational Materials Engineering --
European Materials Modelling Council --
Facilitating ICME through Platformization --
Bridging the Gap between Bulk Properties and Confined Behavior using Finite Element Analysis --
Ontology Dedicated to Knowledge-driven Optimization for ICME Approach --
Integration of Experiments and Simulations to Build Material Big-Data --
ICME-based Process and Alloy Design for Vacuum Carburized Steel Components with High Potential of Reduced Distortion --
Study of Transient Behavior of Slag Layer in Bottom Purged Ladle: A CFD Approach --
Developing Cemented Carbides through ICME --
CSUDDCC2: An Updated Diffusion Database for Cemented Carbides --
Multi-Scale Modeling of Quasi-Directional Solidification of a Cast Si-rich Eutectic Alloy --
Numerical Simulation of Macrosegregation in a 535 Tons Steel Ingot with a Multicomponent-Multiphase Model --
Validation of CAFE Model with Experimental Macroscopic Grain Structures in a 36-ton Steel Ingot --
Analysis of Localized Plastic Strain in Heterogeneous Cast Iron Microstructures using 3D Finite Element Simulations --
An Integrated Solidification and Heat Treatment Models for Predicting Mechanical Properties of Cast Aluminum Alloy Component --
Linked Heat Treatment and Bending Simulation of Aluminum Tailored Heat Treated Profiles --
Numerical Simulation of Meso-micro structure in Ni-based Superalloy during Liquid Metal Cooling Process --
Multiscale Simulation of \\945-Mg dendrite growth via 3D Phase Field Modeling and Ab-initio First Principle Calculations --
Macro- and Micro-simulation and Experiment Study on Microstructure and Mechanical Properties of Squeeze Casting Wheel of Magnesium Alloy --
Solidification Simulation of Fe-Cr-Ni-Mo-C Duplex Stainless Steel using CALPHAD-coupled Multi-phase-field Model with Finite Interface Dissipation --
Phase-field Modeling of ?’ Precipitation Kinetics in W319 Alloys --
Hybrid Hierarchical Model for Damage and Fracture Analysis in Heterogeneous Material --
Fatigue Performance Prediction of Structural Materials by Multi-Scale Modeling and Machine Learning --
Nano Simulation Study of Mechanical Property Parameter for Microstructure-based Multiscale Simulation --
Multiscale, Coupled Chemo-mechanical Modeling of Bainitic Transformation during Press Hardening --
Development of Microstructure-based Multiscale Simulation Process for Hot Rolling of Duplex Stainless Steel --
A Decision-Based Design Method to Explore the Solution Space for Microstructure after Cooling Stage to Realize the End Mechanical Properties of the Rolled Product --
Influence of Computational Grid and Deposit Volume on Residual Stress and Distortion Prediction Accuracy for Additive Manufacturing Modeling.
Рубрики: Materials science.
   Applied mathematics.
   Engineering mathematics.
   Engineering—Materials.
   Characterization and Evaluation of Materials.
   Mathematical and Computational Engineering.
   Materials Engineering.
Анотація: This book represents a collection of papers presented at the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017), a specialty conference organized by The Minerals, Metals & Materials Society (TMS). The contributions offer topics relevant to the global advancement of ICME as an engineering discipline. Topics covered include the following: ICME Success Stories and Applications Verification, Validation, Uncertainty Quantification Issues and Gap Analysis Integration Framework and Usage Additive Manufacturing Phase Field Modeling Microstructure Evolution ICME Design Tools and Application Mechanical Performance Using Multi-Scale Modeling.

Перейти: https://doi.org/10.1007/978-3-319-57864-4

Дод.точки доступу:
Mason, Paul. \ed.\; Fisher, Charles R. \ed.\; Glamm, Ryan. \ed.\; Manuel, Michele V. \ed.\; Schmitz, Georg J. \ed.\; Singh, Amarendra K. \ed.\; Strachan, Alejandro. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
17.


   
    EMR/ESR/EPR Spectroscopy for Characterization of Nanomaterials [[electronic resource] /] : монография / ed. Shukla, Ashutosh Kumar. - 1st ed. 2017. - [S. l. : s. n.]. - XI, 179 p. 96 illus., 35 illus. in color. - Б. ц.
    Зміст:
Part I: Nanomaterials and their classification --
Nanomaterials and their Classification --
A Brief Manifestation of Nanotechnology --
An Overview on Advances in the Nano Carriers Drug Delivery Systems --
Part II: EMR Characterization of Nanoparticles --
EMR of Metallic Nanoparticles --
Elecron Spin Resonance Applied to Nano-Sized Doped Oxides --
EPR Studies of Cerium Dioxide Nanoparticles --
Synthesis and Characterization of Undoped and Doped (Mn, Cu, Co) ZnO Nanoparticles: An EPR Study. .
Рубрики: Nanotechnology.
   Materials science.
   Mechanics.
   Mechanics, Applied.
   Spectroscopy.
   Cancer research.
   Nanotechnology.
   Characterization and Evaluation of Materials.
   Solid Mechanics.
   Spectroscopy/Spectrometry.
   Cancer Research.
Анотація: The subject matter of this book is the application of EMR/ESR/EPR spectroscopy for characterization of nanomaterials. Initial chapters deal with nanomaterials and their classification. Characterization of metallic nanoparticles, metal oxide nanoparticles and rare earth impurity doped nanoparticles from the (ESR) spectrum parameters are covered in the chapters that follow. A special feature of the book is EMR/ESR/EPR spectroscopic characterization of nanoparticles which are important due to their bactericidal and anticancerous properties. Strength of continuous wave (CW) is explained with the help of suitable examples. The book focuses on applications and data interpretation avoiding extensive use of mathematics so that it also caters to the need of young scientists in the life science disciplines. The book includes a comparison with other spectroscopic characterization methods so as to give an integrated approach to the reader. It will prove useful to biomedical scientists and engineers, chemists, and materials engineers in student, researcher, and practitioner positions.

Перейти: https://doi.org/10.1007/978-81-322-3655-9

Дод.точки доступу:
Shukla, Ashutosh Kumar. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
18.


    Zhang, Huamin.
    Li-S and Li-O2 Batteries with High Specific Energy [[electronic resource] :] : research and Development / / Huamin. Zhang, Li, Xianfeng., Zhang, Hongzhang. ; . - 1st ed. 2017. - [S. l. : s. n.]. - VII, 48 p. 26 illus. - Б. ц.
    Зміст:
General Introduction to Batteries with High Energy Density.- Li/S and Li/O2 Batteries Technologies.- Current States of Li/S Batteries --
Current States of Li/O2 Batteries --
Applications and Demonstrations --
Challenges and Prospectives.
Рубрики: Energy storage.
   Electrochemistry.
   Nanotechnology.
   Materials science.
   Energy Storage.
   Electrochemistry.
   Nanotechnology.
   Characterization and Evaluation of Materials.
Анотація: This brief reviews the fundamentals, recent developments, challenges and prospects of Li-S and Li-O2 batteries, including fundamental research and potential applications. It starts with a brief overview encompassing the current state of Li-S and Li-O2 battery technology. It then provides general information on Li-S and Li-O2 batteries, including the electrochemical processes and battery components. The following sections focus on the historical and recent development of Li-S and Li-O2 batteries respectively, offering detailed insights into the key material development, cell assembly, diagnostic test and mechanism of electrolyte decomposition. Lastly, it focuses on the main promising applications of Li-S and Li-O2 batteries together with their challenges and potential.

Перейти: https://doi.org/10.1007/978-981-10-0746-0

Дод.точки доступу:
Li, Xianfeng.; Zhang, Hongzhang.; Zhang, Huamin. \.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
19.


   
    Light Metals 2017 [[electronic resource] /] : монография / ed. Ratvik, Arne P. - 1st ed. 2017. - [S. l. : s. n.]. - XXIX, 1492 p. 1429 illus. - Б. ц.
    Зміст:
Part 1: Alumina & Bauxite: Digestion and Calcination --
CFB Alumina Calciners - New and Future Generation Opportunities for Green Field Refineries --
Evolutional Development of Alkaline Aluminosilicates Processing Technology --
Characterization and Ore Dressing of Bauxite from Brazil --
Process Optimization for Diaspore Digestion Equilibrium using Response Surface Methodology --
Thermodynamic analysis and formation law of Q phase of calcium aluminate clinker --
Leaching Behavior of Alumina from Smelting Reduction Calcium Aluminate Slag with Sodium Carbonate Solution --
Part 2: Alumina & Bauxite: Bauxite Residues Technology --
Security Disposal and Comprehensive Utilization of Bauxite Residues --
Bauxite Residue Amendment Through the Addition of Ca and OR Mg Followed By Carbonation --
Application of Tricalcium Aluminate Instead of Lime for the recovery of aluminum in Middle-low Grade Bauxite in Calcification-Carbonization Process --
Low Temperature Reduction of Hematite in Red-Mud to Magnetite --
Recovery of Iron-, Titanium-bearing Constituents from Bauxite Ore Residue via Magnetic Separation Followed by Sulfuric Acid Leaching --
Processing diasporic red mud by the calcification-carbonation method --
Research of Flocculants and Dewatering Additives for Filtration of Red Mud --
Characterization of activated alumina production via spray pyrolysis --
Part 3: Alumina & Bauxite: Non-traditional Resources --
New process research on aluminium production from non-traditional aluminum resource by microwave chlorination --
Opportunities of pseudoboehmite processing from aluminum content raw material at sintering method --
Chemical Alumina Preparation by Using High Alumina Content Fly Ash --
A Novel Process of Alumina Production from Low-grade Bauxite Containing Sulfur --
Iron separation from bauxite through smelting-reduction process --
Thermodynamic behavior of lime desulfurization in sodium aluminate solution --
Part 4: Alumina & Bauxite: Poster Session --
A study on optimization of processing parameters for synthesis of calcium hydroaluminosulfate using response surface methodology --
Part 5: Aluminum Alloys, Processing and Characterization: Alloy Development and Applications --
Design of New 6xxx Series Al Alloy Using the CALPHAD Thermodynamic Database --
Study of an Al-Ca Alloy with Low Young's Modulus --
Production Of 3004 Aluminum Alloy Sheet For Structural Applications From Twin Roll Casting --
Aluminum alloys with tailored TiB2 particles for composite applications --
Development of low expansion and high strength aluminium hybrid composite --
Part 6: Aluminum Alloys, Processing and Characterization: Solidification and Casting --
A model for a-Al(Mn,Fe)Si crystals --
Casting Characteristics of High Cerium Content Aluminum Alloys --
In-situ observation of fragmentation of primary crystals by ultrasonic cavitation in water --
The enhancement of mechanical properties of A356 alloy solidified at lower cooling rate via effectively grain refinement --
Secondary Aluminum Alloys Processed by Semisolid Process for Automotive Application --
Integrated casting-extrusion of an AA6082 aluminum alloy --
On Porosity Formation in Al-Si-Cu Cast Alloys --
Part 7: Aluminum Alloys, Processing and Characterization: Characterization --
Algorithm for Finding the Correlation between the Properties of Wrought Aluminum Alloys, the Chemical Composition and the Processing Parameters --
Analysis of an aluminium alloy containing trace elements --
Determination of aluminum oxide thickness on the annealed surface of 8000 series aluminum Foil by Fourier Transform Infrared Spectroscopy --
Test Uncertainty in Chemical Composition Analysis --
Real Time 3D Imaging and Laser Marking System for Industrial Traceability --
Production and Certification of Arconic Certified Reference Materials --
Characterization of Large Strain Extrusion Machining (LSEM) of AA7050 --
Interaction between fatigue micro-cracks and inclusion/matrix interface in high-strength Al alloy --
Influence of trace element additions on Fe bearing intermetallic solidification of a 6063 Al alloy --
Part 8: Aluminum Alloys, Processing and Characterization: Heat Treatment --
THE OPTIMIZATION OF THE HOMOGENIZATION TREATMENT OF AA7075 --
Precipitation modeling and validation of Al-5%Cu-0.4%Mn alloy using quench factor analysis --
Young’s modulus of Al-Si-Mg-Cu based alloys under different heat treatment processes --
Intergranular Corrosion Investigation on EN-AW 6082 Redraw Rod --
The influence of process parameters and thermomechanical history on streaking defects in AA6060 extrusions --
Effect of Heat-treatment on Microstructure and Mechanical Properties of Sonicated Multicomponent AlMgSiCuZn Alloy --
Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys --
Part 9: Aluminum Alloys, Processing and Characterization: Plasticity and Mechanical Behavior --
New Yield Criterion for Description of Plastic Deformation of Face-Centered Cubic Single Crystals --
Quantifying As-cast and Homogenized AA7050 Mechanical Properties through Compression Testing --
Determining a Stable Texture Condition Under Complex Strain Path Deformations in Face Centered Cubic Metals --
Microstructural transition and elevated temperature tensile properties of modified Al-Si-Cu-Mg alloys --
Effects of alloying elements on anneal-hardening behavior of aluminum alloy foils --
Increasing strength and corrosion resistance of AlMgSi alloys by tailor-made thermomechanical processing --
Microstructural optimization of a High Mechanical Properties (HMP) aluminum alloy by using CobaPress™ process --
Cyclic Stress-strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy --
Part 10: Aluminum Alloys, Processing and Characterization: Poster Session --
Corrosion of Al-Mg Alloys in Ethanol --
Warm pressing of Al powders: an alternative consolidation approach --
Part 11: Aluminum Reduction Technology: Dry Scrubbing, Alumina Transport and Dissolution --
Spreading of Alumina and Raft Formation on the Surface of Molten Cryolite --
Fluoride Capture Capacity of SGA: The Interplay between Particle and Pore Size Distribution --
Predictive Formulae for the Competitive Adsorption of HF and SO2 on Smeltergrade Alumina Used in Dry Scrubbing Applications --
Pot Gas Treatment at High Gas Temperatures --
Influence of Handling Parameter on Powder Properties --
Part 12: Aluminum Reduction Technology: Anode Effect and PFC Emissions --
Preventive Treatment of Anode Effects Using On-Line Individual Anode Current Monitoring --
Reduction in EGA Jebel Ali Potroom GHG Emissions --
Partial Anode Effect in a Two-Compartment Laboratory Alumina Reduction Cell --
Co-evolution of Carbon Oxides and Fluorides during the Electrowinning of Aluminium with Molten NaF-AlF3-CaF2-Al2O3 Electrolytes --
Part 13: Aluminum Reduction Technology: Cell Lining Materials --
Chemical stability of thermal insulating materials in sodium vapour environment --
AGING OF INSULATING LININGS IN ALUMINIUM ELECTROLYSIS CELLS --
Cathode Wear Based on Autopsy of a Shut down Aluminium Electrolysis Cell --
SPL Recycling and Re-Processing --
Alternative applications of SPL: Testing ideas through experiments and mathematical modeling --
Part 14: Aluminum Reduction Technology: Cell Voltage and Pot Control --
Clustering Aluminium Reduction Cells --
Application of Multivariate Statistical Process Control with STARprobeTM Measurements in Aluminium Electrolysis Cells --
Study Of Impact Of The Anode Slots On The Voltage Fluctuations Of Aluminium Electrolysis Cell Using Bubble Layer Simulator --
Detecting, Identifying and Managing Systematic Potline Issues with Generation 3 Process Control --
Predicting Instability and Current Efficiency of Industrial Cells --
Part 14: Aluminum Reduction Technology: Electrolyte and Fundamentals --
Sodium in Aluminium as a Cell Performance Indicator: A Quantitative Framework --
Bauxite processing via chloride route to produce chloride products and subsequent electrolysis of aluminium chloride to produce aluminium metal --
Stability of Chlorides in Cryolitic Electrolyte --
Role of Heat Transfer in the Formation of Carbon Oxides in Smelting Cells --
Part 15: Aluminum Reduction Technology: Modelling and Cell Design --
Improving The Understanding Of BUSBAR Design And Cell MHD Performance --
LES turbulence modeling approach for molten aluminium and electrolyte flow in aluminum electrolysis cell --
MHD of Large Scale Liquid Metal Batteries --
Low energy consumption cell designs involving copper inserts and an innovative busbar network layout --
Minimizing Cathode Voltage Drop by Optimizing Cathode Slot Design --
Part 16: Aluminum Reduction Technology: Potroom Operations --
Crane Electrical Isulation Monitoring in Potlines: New CANDI 4.0 Development --
Surviving an Extended Power Outage after a Break Down in the Sub Station --
Retrofit of Damaged Corner Risers by Means of Bolted Connections --
Theory and Practice of High Temperature Gas Baking Technology for Alumninium Electrolysis Cells --
Part 17: Aluminum Reduction Technology: Technology Development --
IMPLEMENTATION OF D18+ CELL TECHNOLOGY AT EGA JEBEL ALI SMELTER --
Integrating a New Smelter Supervision HMI in Existing Control Systems at ALBRAS --
DX+ ULTRA – EGA HIGH PRODUCTIVITY, LOW ENERGY CELL TECHNOLOGY --
Potroom HF Emission Reduction by Anode Inert Tray Technology Performances of ALRO Industrial 1st of Class --
Enabling efficient heat recovery from aluminium pot gas --
The Successful Implementation of AP40 Technology at Kitimat --
Part 18: Cast Shop Technology: Continuous Strip Casting --
Effect of grain refiners on aluminum twin roll casting process --
Influence of Process Conditions on Segregation Behavior in Twin-Roll Casting of an AlFeSi alloy --
Effect of Magnesium Content on Microstructure and Mechanical Properties of Twin-Roll Cast Aluminum Alloys --
Influence of sticking on the roll topography at twin-roll casting of aluminum alloys --
Material Surface Roughness Change in Twin Roll Cas.
Рубрики: Metals.
   Materials science.
   Engineering—Materials.
   Metallic Materials.
   Characterization and Evaluation of Materials.
   Materials Engineering.
Анотація: .

Перейти: https://doi.org/10.1007/978-3-319-51541-0

Дод.точки доступу:
Ratvik, Arne P. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
20.


   
    Handbook of Epoxy Blends [[electronic resource] /] : монография / ed. Parameswaranpillai, Jyotishkumar. [et al.]. - 1st ed. 2017. - [S. l. : s. n.]. - 558 illus., 164 illus. in color. eReference. - Б. ц.
    Зміст:
Part I Epoxy/Rubber Blends --
Introduction to Rubber epoxy polymers --
Novel techniques for the preparation of different rubber (CTBN, ATBN, ENR, HNR, liquid rubbers)/epoxy blends --
Miscibility and phase separation of epoxy/rubber blends --
Part II Epoxy/Thermoplastic Blends --
Introduction to epoxy/thermoplastic blends --
Part III Epoxy/Block-Copolymer Blends --
Introduction to epoxy/block-copolymer blends.
Рубрики: Polymers  .
   Ceramics.
   Glass.
   Composites (Materials).
   Composite materials.
   Nanotechnology.
   Chemical engineering.
   Materials science.
   Nanoscale science.
   Nanoscience.
   Nanostructures.
   Polymer Sciences.
   Ceramics, Glass, Composites, Natural Materials.
   Nanotechnology and Microengineering.
   Industrial Chemistry/Chemical Engineering.
   Characterization and Evaluation of Materials.
   Nanoscale Science and Technology.
Анотація: This reference work compiles and summarizes the available information on epoxy blends. It covers all essential areas – the synthesis, processing, characterization and applications of epoxy blends – in a comprehensive manner. The handbook is highly application-oriented and thus serves as a valuable, authoritative reference guide for researchers, engineers, and technologists working on epoxy blends, but also for graduate and postgraduate students, polymer chemists, and faculties at universities and colleges.The handbook is divided into three parts and organized by the types of blends and components: Part I covers epoxy rubber blends, Part II focuses on epoxy thermoplastic blends, and Part III examines epoxy block-copolymer blends. Each part starts with an introduction, and the individual chapters provide readers with comprehensive information on the synthesis and processing, analysis and characterization, properties and applications of the different epoxy blends. All parts conclude with a critical evaluation of the applications, weighing their advantages and drawbacks. Leading international experts from corporate and academic research institutions and universities discuss the correlations of different epoxy blend properties with their macro-, micro- and nanostructures. This handbook thus offers a rich resource for newcomers to the field, and a major reference work for experienced researchers, the first of its kind available on the market. As epoxies find extremely broad applications, e.g. in oil & gas, in the chemical industry, building and construction industry, automotive, aviation and aerospace, boat building and marine applications, in adhesives and coatings, and many more, this handbook addresses researchers and practitioners from all these fields.

Перейти: https://doi.org/10.1007/978-3-319-40043-3

Дод.точки доступу:
Parameswaranpillai, Jyotishkumar. \ed.\; Hameed, Nishar. \ed.\; Pionteck, Jurgen. \ed.\; Woo, Eamor M. \ed.\; SpringerLink (Online service)
Свободных экз. нет
Знайти схожі
 1-20    21-40   41-60   61-80   81-100   101-103 
 
Стандартний
Розширений
Професійний
Розподілений
За словником
УДК-навігатор
Тематичний навігатор
© Міжнародна Асоціація користувачів і розробників електронних бібліотек і нових інформаційних технологій
(Асоціація ЕБНІТ)